Crowngas Product Page

Showing 1–84 of 175 results

  • Addressable Gas Detection Controller Crowcon Make by Crowngas Qatar

    Addressable GM64 Gas Panel

    • Crowcon GM64 Addressable Gas Panel
    • Support for 64 Addressable Gas Detectors – in single panel.
    • Support for up-to 16 / 64 / 128 Fixed Gas Detectors.
    • GM16 / GM64 / GM128 Available in Different Configurations.
    • 4-20mA Analog & RS-485 MODBUS Standard Communication.
    • Direct Web page live feed communication – For BMS Integration.
    • Multiple Data & Zone Screens available – Real Time Readings.
    • Available in Fiberglass Enclosures, 19″ rack mount or aluminium.
    • Contact us for more information.
    View ProductDone

  • Air Quality Monitoring Services

    • Air Quality Monitoring Services & Preventive Actions.
    • Measure CO2, PM2.5, PM10, CO2, Formaldehyde & VOC’s.
    • Detailed report & data aggregation from comprehensive data.
    • Ensure environment is safe for working & within limits.
    • Poor Air Quality can cause respiratory & cardiovascular issues.
    • Indoor & Outdoor air quality monitoring & safety.
    • Preventive & suggestive actions for better air quality.
    • Supply & training of Safety Staff with AQI Monitors.
    • Fixed Solutions for Comprehensive Monitoring.
    • Contact us for more information.
    View ProductDone

  • AIR4 – Room Air Quality Monitor

    • AIR4 – Room Air Quality Monitor & Transmitter.
    • Sensor identifies VOCs like smoke, odors, bio-effluence & pollutants.
    • 20-28 Vac/dc for BMS or HVAC Integration.
    • Smart unit for automatic calibration.
    • LED Indicator displaying status of air quality.
    • Negligible over specified operating range.
    • Contact us for more information.
    View ProductDone
  • Ammonia NH3 Gas Detector by Crowngas Qatar

    Ammonia (NH3) Gas Detector

    • NH3 Detector
    • Low voltage 12-24 Vac/Vdc Monitor
    • Three separate relays for three alarm levels
    • LED Display shows Active Gas Concentration
    • Available in PPM Alarm Options
    • Technician Adjustable Settings & Options
    • Built-in buzzer
    • Made in USA
    View ProductDone
  • Analog Linear Heat Detector by Crowngas Qatar

    Analogue Linear Heat Detector

    • Linear Heat Detector Cables.
    • Resettable linear heat detector cable – for solar applications.
    • To be used with Linear Heat Detector Control Unit & EOL.
    • Can be used in areas that require regular Heat sensing & Detection System.
    • Cables can be reset once normal temperature is realized – Equipment safety.
    • Can be used to measure temperature in critical equipment.
    • System can be used to switch on passive cooling / fans to prevent overheating.
    • Cable Don’t Need to be Replaced After Detection – Cables will normalize.
    • Contact us for more information.

     

    View ProductDone

  • Apollo 55000-005 XP95 Red Sounder Beacon

    • Apollo XP95 Open-Area Sounder Beacon VID.
    • Built-in Short Circuit Isolator and IP65 Protection.
    • Self-test fault monitoring & tony changing.
    • Field adjustable alarm volume settings.
    • Individual and Group Addressing.
    • For use with Apollo XP95 & Discovery Loops.
    • Ex-stock and QCDD Approved.
    View ProductDone

  • Apollo 55000-273 Beam Smoke Detector

    • Apollo 55000-273 Reflective Beam Smoke Detector.
    • Compatible with Discovery & XP95 Protocols.
    • Built-in short circuit isolator & drift compensation.
    • Auto reset based on alarm or fault condition.
    • Ex-stock & QCDD Approved.
    View ProductDone

  • Apollo 55000-863USA XP95A Relay Output Module

    • Apollo 55000-863USA XP95A Relay Output Module.
    • XP95A Relay Output Module is a Loop Powered Device.
    • White Polycarbonate enclosure with DIP Switches.
    • Ex-stock & QCDD Approved.
    View ProductDone

  • Apollo 55200-003APO Waterproof MCP

    • Apollo Conventional Waterproof MCP 55200-003APO.
    • Resettable element for testing & verification.
    • Easy access & front reset mechanism.
    • Ex-stock & QCDD Approved.
    View ProductDone

  • Apollo 58000-005APO Discovery Sounder Beacon

    • Apollo Discovery Open-Area Sounder Beacon VID.
    • Red Flash & Red Body with a 1Hz flash rate.
    • For use with Addressable Discovery Protocol.
    • Ex-stock and QCDD Approved.
    View ProductDone

  • Apollo Fire Alarm System

    • Apollo Fire Alarm System
    • Supply – Orbis, Discovery, XP95, Series65, Series65A & Xpander
    • Smoke Detectors, Heat Detectors & Manual Call Point – Conventional
    • Smoke Detectors, Heat Detectors & Manual Call Point – Addressable
    • Smoke Detectors, Heat Detectors & MCP – Addressable – SIL 2
    • SIL 2 Devices for use in Hazardous Areas & Explosive Atmospheres
    • QCD Approved.
    View ProductDone

  • Apollo Integrated Base Sounder with Isolator

    • Apollo Integrated Base Sounder 45681-300APO.
    • Integrated base sounder is line powered.
    • Built-in integrated addressing for the device.
    • Support for XP95, Discovery & CoreProtocol.
    • Support for Two Tones, 55-75dBA & 75-91dBa.
    • Ex-stock & QCDD Approved.
    View ProductDone

  • Apollo SA4700-300APO DIN-Rail Switch Monitor Module

    • Apollo SA4700-300APO Switch Monitor Module.
    • Intelligent DIN-Rail Monitoring Poles.
    • Compatible with XP95, Discovery & CoreProtocol.
    • Built-in Controllable Isolator & Pre-configured modes.
    • Earth fault monitoring and address range from 1 – 254.
    • Ex-stock and QCDD Approved.
    View ProductDone

  • Apollo XP95 Mains Switching Input / Output Unit

    • Apollo 55000-875APO Addressable Unit.
    • Mains Switching Input/Output unit.
    • Voltage free single pole change-over relay.
    • Monitored switch input built in.
    • Three visible LED’s & supervision.
    • Capable of switching 250Vac up-to 5A.
    • Ex-stock and QCDD Approved.
    View ProductDone

  • Apollo XP95 Zone Monitor Module

    • Apollo 55000-845APO XP95 Zone Monitor Module.
    • Built with bi-directional short circuit isolator.
    • Not affected by short circuits in loops.
    • Two LED’s – one red and one yellow.
    • Ex-stock & QCDD Approved.
    View ProductDone

  • Automatic Calibration Station for Portable Gas Detector

    • Crowngas Offers Automatic Calibration / Bump Test Station
    • To Manage Calibration of Large Portable Network
    • Station can be Mains or Battery Powered
    • Store & Manage Alarm Levels from a single point.
    • Logged Information for Pass / Fail of each portable
    • Collect all Alarms & Event Logs from Individual Portable.
    • Doesn’t require trained technician for Calibration.
    • Save cost & time by utilizing Automatic Calibration Station.
    • Comprehensive Auditable Reports on Each Portable.
    • PC Connection / Backup in USB.
    • Contact us for more information.
    View ProductDone

  • Baldwin Boxall Emergency Voice Communication System

    • Baldwin Boxall – Emergency Voice Communication Control Panel.
    • Radial Wired Emergency Voice Communication System.
    • Battery backed (24 hours quiescent & 3 hours functional)
    • Networkable – Networked panels are wired in a loop.
    • Remote units are wired in star configuration.
    • Fully Duplex – Firefighter & Emergency Telephone.
    • Integrate to local fire panel with C2CFPE Interface Module.
    • Outstations & Network Panel – For Expansion.
    • Toilet Alarm & Integration along with accessories.
    • Contact us for more information.
    View ProductDone

  • Bartec Feam EHM9 Instrument Housing

    • Explosion proof Instrument housing for analog & digital measuring instruments.
    • Round Aluminium Housing
    • Windowed with transparent tempered glass.
    • ATEX Certified for use in Zone 1 & 2.
    View ProductDone

  • Bartec Feam Enclosures

    • Bartec Feam Enclosures – Aluminium or Stainless-Steel c/w SS Screws
    • For use in Zone 1, 2, 21 & 22 Hazardous Areas
    • Custom designed by Factory as per client requirements & design.
    • Custom design assembly, approval & certification for assembled system.
    • Enclosure to be used for transformers, junction box reactors, barriers, control & signaling boards etc.
    • Material Either Marine Grade Copper Free Aluminium Light Alloy or Stainless Steel AISI 316L
    • Optional – Cast Iron Body / Cover, Anti condensate Orange Painting, Glass Windows, Drain & Breather Valves
    • Contact for more information.
    View ProductDone

  • Bartec Feam Junction & Pulling Boxes

    • Junction Boxes & Pulling Boxes for Hazardous Area
    • Available in Marine Grade Copper free Aluminium or SS 316
    • Available Sizes – 17/27/37
    • SS Screws with O-Ring Seal
    • IP 66 Rated
    • For use in Zone 1 & 2 Hazardous Areas
    View ProductDone

  • BW Clip Portable Gas Detector

    • BW Clip – Honeywell Portable Gas Detector.
    • Single Gas Portable Gas Detector – 2 Years.
    • Detector – H2S / CO / O2 / SO2 Available.
    • Two-year battery life with countdown.
    • IP 66 / 67 Certified for wet/dusty areas.
    • Explosion Proof – For use in Hazardous Areas.
    • User adjustable alarm setpoints & signals.
    • Bump test / calibration reminder for test.
    • Contact us for more information.
    View ProductDone

  • BW Max XT II

    • Honeywell BW Max XT II Multi-Gas Detector.
    • Measure H2S, CO, O2 & Combustible Gases (%LEL).
    • Integrated Sampling Pump with Tube for sampling.
    • LCD Display shows real-time gas readings and logs.
    • Integrated Standard Datalogging & event logging.
    • Fast and easy calibration procedure & automatic test.
    • Integrated self-test of sensor, battery & A/V on start-up.
    • Audible 95dB alarm with visual and vibrating indicators.
    • Rechargeable with battery life of 13 hours in normal use.
    • Explosion Proof Certified for use in Hazardous Areas.
    • Contact us for more information.
    View ProductDone

  • BW Microclip XL Series

    • BW Microclip XL Series
    • Multi-gas Portable Detector
    • Detect O2, CO, H2S & Flammable Gas (%LEL)
    • Included Rechargeable Battery & Adaptor
    • IP 68 Rated
    • Battery life of 18 Hours / Charge
    • Visual, vibrating audible alarm built in.
    • Bump test & calibration to be done at regular intervals.
    View ProductDone

  • C-Tec – Fire Alarm System

    • C-Tec CFP 2-8 Zone Fire Panels
    • C-Tec FP/MFP 1-28 Zone Fire Panels
    • C-Tec AlarmSense Optical Smoke Detector
    • C-Tec AlarmSense Optical Heat Detector
    • C-Tec AlarmSense Manual Call Point
    • C-Tec AlarmSense Open Area Sounder
    • C-Tec ActiV Smoke & Heat Detectors
    • C-Tec XFP Addressable Fire Panel
    • QCD Approved – Supply & Trading Only.
    • Contact us for more information.
    View ProductDone

  • C-TEC Addressable Base VAD Sounder

    • C-TEC BF456A/CX/W Addressable VAD Sounder.
    • Compatible with C-TEC XFP/ZFP, XP95/Discovery FA.
    • Ceiling mounted with stacked sounder/VAD/Detector.
    • Includes BF431QCP Quick Connect Plate & Spur Wires.
    • Built-in short-circuit loop isolator with 7 volume levels.
    • Field adjustable tone settings & group addressing.
    • Ex-stock & QCDD Approved.
    View ProductDone

  • Calibration Gas Cylinder & Regulator

    • Specialty Mixed Calibration Gas
    • Included Regulator & PVC Hose
    • Additional Accessories / Calibration Equipment
    • Included Analytical Certificate with Calibration Cylinder.
    • Regulator 0.5L/min or 1L/min – Brass for Flammable Gas & SS for H2S.
    • Different Gas Mix Available – Flammable, Oxygen & Toxic.
    • Contact us for more information.
    View ProductDone

  • Calibration Services

    Crowngas Offers Certified On-Site Calibration Services for all Fixed & Portable Gas Detectors for client convenience and to ensure equipment is calibrated in the ideal environment.

    • Calibration Services for Gas Detectors – Both Fixed & Portables Detectors.
    • Calibration to be done every 6 Months (180 days) by Certified Professional.
    • Prolongs sensor life, functionality and equipment integrity for field use.
    • Recalibrates & recorrects sensor jump & drift – Analog & Digital Sensors.
    • Ensures optimal functioning of the system – Alarm & Relay Activation.
    • Increases Theoretical Sensor Life based on Proper Maintenance & use.
    • Contact us for more information.

     

     

    View ProductDone

  • Capri – Cable Glands

    • Capri Non-Armoured Cable Gland, Non-Armoured Barrier Gland, Armoured Cable Gland, Armoured Barrier Gland
    • Nickel-plated Brass, 316 SS, Bronze & Aluminium Options
    • Suitable Lubricant to be used for All Threads of SS and Aluminium
    • IP 68 Rated (With Sealing Washers)
    • Elastomeric seal for inner & outer sheath
    • Armour Clamping & Bonding
    • Contact us for more information.
    View ProductDone
  • CO2 Carbondioxide Gas Detector CD-6MC Macurco by Crowngas Qatar

    Carbondioxde (CO2) Gas Detector

    • Carbondioxide (CO2) Fixed Gas Detector.
    • Low voltage 12-24 Vac/Vdc Monitor.
    • Three separate relays for three alarm levels.
    • LED Display shows Active Gas Concentration.
    • Available in PPM and %VOL Alarm Options.
    • Technician Adjustable Settings & Options.
    • Built-in buzzer – For Alarm Signaling & Alert.
    • Contact us for more information.
    View ProductDone
  • CO Gas Detector Macurco Make by Crowngas Qatar

    Carbonmonoxide (CO) Detector – QCD Approved

    • Carbon monoxide CO Gas Detector.
    • For use in kitchens & indoors – Safe Area Installation.
    • Local Alarm Buzzer & Relay Output – Alarm & Trouble.
    • LED Status Indicator – Red, Amber & Green LED’s.
    • Integrate directly into the Fire Alarm System.
    • QCD Approved – For use with Fire Alarm Panel.
    • Contact us for more information.
    View ProductDone

  • Chalmit – Hazardous Area Lights

    • Chalmit – Hazardous Area Lights
    • Emergency Lighting, Flood Lighting, High Bay – Low Bay, Linear Lighting, Temporary Lights & Floodlights
    • Voltage Fluctuation Resistant
    • DC Operation (Non-Emergency Uses)
    • 3 Hour Emergency Backup
    • Easy Install & Maintenance
    • Custom Emergency Exit Sign (With Arrow)
    • Various IP Ratings & Hazardous Area Designs
    • Contact us for more information.
    View ProductDone

  • CO2 Leak Detector

    • IAQ8494 Ambient CO2 Detector
    • Handheld Device to measure CO2 levels.
    • Can be used to measure CO2 Leaks in MGPS.
    • CO2 Gas Lines – Leak Detection and Point Sources.
    • 0 – 9,999ppm level reading.
    • Backlit display & adjustable audible alarm.
    • Capable of measuring ambient temperature.
    • Includes Adaptor & carry case.
    • Contact us for more information.
    View ProductDone

  • Context Plus Conventional Manual Call Point

    • Context Plus MCP1A-525IMC Conventional MCP.
    • LPCB & VDS Approved for use with Fire Alarm.
    • No Break Resettable Conventional MCP.
    • Red Color made with PC/ABS Plastic.
    • Ex-stock & QCDD Approved.
    View ProductDone
  • Crowngas MODBUS Addressable Gas Control Panel

    Conventional Control Panel (12)

    • Macurco Conventional Gas Control Panel
    • Supports 12 4-20mA Analog Connections
    • 3x Zones
    • 3x 10A Relays
    • 2X 24Vdc Output
    • Contact for more information.
    View ProductDone

  • Conventional Flame Detector

    • Conventional Flame Detector for Safe Area.
    • Flame Detecting Principle: UV/IR.
    • Enclosure: Metallic Type, Aluminium Alloy.
    • FOV & Range: 90° Coverage Angle & 30m.
    • Operating Voltage: 24Vdc (17Vdc to 32 Vdc).
    • Relay Outputs for Fire, Fault & Warning Alarm.
    • 4-20mA Analog Signal Output / Conventional.
    • QCDD Approved for Fire Panel Integration.
    • Aluminium Mounting Bracket for 360° installation.
    • Bracket: Stainless Steel Alloy (SUS316).
    • Optional: Sun shield & Rain Shield Accessories.
    • Contact us for more information.

    Flame Detector is suitable for Indoor & Outdoor Area’s with several installation across Qatar. Contact us for more information & technical support.

    View ProductDone

  • Cooper – Fire Alarm System & Accessories

    • Cooper – Fire Alarm System – Addressable & Conventional Detectors.
    • Eaton Cooper – BiWire – Two-wire Detector range.
    • Eaton Cooper – Optical, Photo-thermal & heat detectors.
    • Eaton Cooper – Remote Indicator for Conventional Fire.
    • Eaton Cooper – CF1000 Addressable Fire Alarm System.
    • Eaton Cooper – CF2000 Addressable Fire Alarm System.
    • Eaton Cooper – CF3000 Addressable Fire Alarm System.
    • Eaton Cooper – Active or Passive Repeater Panels.
    • Contact us for more information.
    View ProductDone
  • Crowngas Area Gas Monitor

    Crowcon Detective Plus Area Gas Monitor

    • Crowcon Detective+ Transportable Area Gas Monitor.
    • Multi-area gas monitors for work in temporary areas.
    • Required in confined spaces/maintenance/shutdown areas.
    • Optional Pump for Gas Sampling & Enclosed Space Check.
    • Built in alarm sounder and multiple beacons for local alert.
    • Built in Display for Real Time Readings & Event Logging.
    • Can be networked to setup a perimeter or secure an area.
    • Available in Wireless* mode for signal transmission.
    • Capable of networking up-to 25 Detective+ area gas monitors.
    • Contact us for more information.
    View ProductDone
  • Gasmaster 4 Channel Control Panel for Gas Detectors by Crowngas Qatar

    Crowcon Gasmaster 4 Channel Gas Control Panel

    • Crowcon Gasmaster 4 Channel Gas Control Panel.
    • Capable up-to 4 Oxygen, Toxic or Flammable Gas Detectors.
    • Each detector assigned 2 levels of independent alarm.
    • Push buttons and LED Display enable easy operation.
    • Functional Certification & Capable – SIL 2 Certified.
    • RS-485 MODBUS communication for DCS/PLC/SCADA.
    • Battery Backup – For operation in case of power failure.
    • Fire Alarm Control Panel Integration & Networking.
    • Event Logger – To Measure, Fire, Gas & Fault Alarms.
    • Contact us for more information.
    View ProductDone

  • Crowcon IRmax Infra-Red Gas Detector

    • Crowcon IRmax Infrared Flammable Fixed Gas Detector
    • Wall Mounting & Pipe Mounting with Suitable Accessories.
    • 4-20mA Analog Output for Integration with Control System.
    • Optional – HART & RS-485 MODBUS for Addressable System.
    • SIL 2 Rated for Process & Functional Safety Equipment’s.
    • ATEX Certified for use in Explosive Atmospheres & Offshore.
    • Enclosure: Stainless Steel 316 c/w Optional Display.
    • Contact us for more information.
    View ProductDone
  • Intrinsically Safe Gas Detector by Crowngas

    Crowcon TXgard-IS+ Toxic & Oxygen Gas Detector

    • Crowcon TXgard-IS+ Toxic & Oxygen Gas Detector.
    • Intrinsically Safe Fixed Gas Detector (with Isolator)
    • Local LCD Display – Clear Display with menu options.
    • Used to detect Toxic Gases & Oxygen Levels.
    • Explosion Proof (ATEX) Certified for Zone 0 areas.
    • Capable of Detecting H2S, NH3, O2 & Toxic Gases.
    • 4-20mA Signal – For Analog Signal to PLC or BMS.
    • Calibration to be performed manually on field.
    • Can be used as sampling detector with flow adaptor.
    • Strong, sturdy carbon loaded nylon enclosure with IP65.
    • Contact us for more information.
    View ProductDone
  • Addressable Gas Detector Xgard Bright by Crowngas Qatar

    Crowcon Xgard Bright

    • Xgard Bright – Flammable, toxic gas & oxygen monitoring.
    • Available in ADC12 Aluminium Alloy Enclosure Material.
    • IP65 Protection for use in Outdoors (Optional IP66)
    • Addressable Gas Detector for large area networks.
    • Clear OLED Display for use in sunlit / bright areas.
    • Magnetic non-intrusive calibration with key.
    • ATEX Certified for use in hazardous areas.
    • Built in Relays – Alarm 1, Alarm 2 & Fault.
    • Certified for use in Zone 1 & Zone 2 Areas.
    • Contact us for more information.
    View ProductDone
  • Cheap Nylon Case Gas Detector Xgard Make - Crowcon by Crowngas Qatar

    Crowcon Xgard Fixed Gas Detector

    • Crowcon Xgard Fixed Gas Detector
    • Xgard Type 1 – Nylon: 0.5kg / Alloy: 1kg / 316 SS: 3.1kg
    • Xgard Type 2 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Xgard Type 3 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Xgard Type 4 – Aluminium: 1.5kg
    • Xgard Type 5 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Xgard Type 6 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Explosion Proof – ATEX Certified Fixed Gas Detector
    • Low-cost reliable Gas Detector – In Battery Rooms.
    • Available in Nylon GRP,  Aluminium or SS 316.
    • Ability to detect several ranges of flammable gases, toxic & oxygen.
    • 4-20mA Analog Signals – Direct PLC & Plant Integration.
    • Requires half-yearly calibration and system testing.
    • QatarEnergy Approved for use in Gas Detection System.
    • Contact us for more information.
    View ProductDone

  • Crowcon Xgard Type 1 Intrinsically Safe Fixed Gas Detector

    • Crowcon Xgard Type 1 Fixed Gas Detectors.
    • Fixed Point Ex ia Intrinsically Safe Toxic & Oxygen Detectors.
    • Uses an electrochemical sensor to provide 2-wire 4/20mA Output.
    • Operating temperature between -40°C to +50°C & humid spaces.
    • Xgard Type 1 has standard GRP Enclosure – Glass Reinforced Nylon.
    • GRP Polymers are chemically resistant & cost effective for wide use.
    • Optional Accessories include spray deflector, flow adaptor & W/P caps.
    • Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
    • Offering Calibration, Sensor & Component Spares, Replacement.
    • Contact us for more information.
    View ProductDone

  • Crowcon Xgard Type 2 Flameproof Toxic & Oxygen Detector

    • Crowcon Xgard Type 2 Flameproof Fixed Gas Detectors.
    • Type 2 Exd Flameproof Toxic & Oxygen Detectors.
    • Uses an electrochemical / pellistor sensor for gas detection.
    • Operating temperature between -40°C to +50°C & humid spaces.
    • Xgard Type 2 has standard Aluminium Enclosure – Rigid & Strong.
    • Aluminium enclosures are highly durable with tough polyester coat.
    • Accessories available for duct mounting & sampling applications.
    • Optional Accessories include spray deflector, flow adaptor & W/P caps.
    • Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
    • Offering Calibration, Sensor & Component Spares, Replacement.
    • Contact us for more information.
    View ProductDone

  • Crowcon Xgard Type 3 Flammable Gas Detector

    • Crowcon Xgard Type 3 Fixed Gas Detectors.
    • Exde Flameproof Flammable Explosion Proof Gas Detectors.
    • Uses poison resistant 3-wire pellistor sensor for flammable gas.
    • Operating temperature -40 to +80°C & humid conditions installation.
    • Optional Accessory Enclosure required for connection – For easy zero/cal.
    • Aluminium Enclosure with Polymer coating as standard – ATEX Certified.
    • Optional Accessories include spray deflector, flow adaptor & W/P caps.
    • Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
    • Offering Calibration, Sensor & Component Spares, Replacement.
    • Contact us for more information.
    View ProductDone

  • Crowcon Xgard Type 4 Flammable Gas Detector

    • Crowcon Xgard Type 4 High Temperature Flammable Gas Detectors.
    • Exd Flameproof Flammable Gas Detectors use poison resistant sensors.
    • Detector comes in either 316 Stainless Steel or Aluminium Housing.
    • Contains terminals for 3-wire mV Wheatstone Bridge Output.
    • Operating Temperature of -20°C to 150°C for a wide operating range.
    • Optional Accessory Enclosure required for connection – For easy zero/cal.
    • Aluminium Enclosure with Polymer coating as standard – ATEX Certified.
    • Optional Accessories include spray deflector, flow adaptor & W/P caps.
    • Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
    • Offering Calibration, Sensor & Component Spares, Replacement.
    • Contact us for more information.
    View ProductDone

  • Crowcon Xgard Type 5 Flameproof Gas Detector

    • Crowcon Xgard Type 5 Flammable Gas Detector.
    • Consists of poison resistant pellistor sensor for flammable gases.
    • Built-in amplifier unit to provide 3-wire 4-20mA Analog Output.
    • Operating temperature between -40°C to +55°C wide temperatures.
    • Aluminium Enclosure with Polymer coating as standard – ATEX Certified.
    • Optional Accessories include spray deflector, flow adaptor & W/P caps.
    • Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
    • Offering Calibration, Sensor & Component Spares, Replacement.
    • Contact us for more information.
    View ProductDone

  • Crowcon Xgard Type 6 Flammable Gas Detector

    • Crowcon Xgard Type 6 Fixed Gas Detectors.
    • Type 6 is designed to Detect % VOL Levels of Flammable Gases.
    • Uses thermal conductivity sensor within metallic enclosure (ATEX).
    • Operating temperature +10°C to +55°C & humid conditions installation.
    • Aluminium Enclosure with Polymer coating as standard – ATEX Certified.
    • Optional Accessories include spray deflector, flow adaptor & W/P caps.
    • Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
    • Offering Calibration, Sensor & Component Spares, Replacement.
    • Contact us for more information.
    View ProductDone

  • Demco Motorized Alarm Bell

    • Demco Motorized Alarm Bell.
    • Part No: D-122-6
    • 6″ Dome size in red color.
    • IP 65 Rated for Weatherproof Installation.
    • Interchangeable base and zero standby current.
    • Loud and clean ringing sound with low current.
    • 95dB Rating for a distance of 3m / 10 ft.
    • Ex-stock & QCDD Approved.
    View ProductDone
  • Crowngas MODBUS Addressable Gas Control Panel

    Digital Gas Control Panel

    • Macurco Digital Gas Control Panel
    • Available in 87, & 99 Addressable Control Panel via RS-485 & BACNET
    • Support up-to 3x Zones – For Individual Zoning / Area Segmentation.
    • 3 x 10A Relays – To Drive High Powered Outputs incl. Valves & Fans.
    • 2 x 24Vdc Output – For Sounder, Flasher or Integrated AV Units.
    • LED Display with 2 rows of 16 characters for Operator Information.
    • LED Indicators – Power, Alarm/Warning, Silence, Relay 1 & 2 & 3.
    • External Keypad for User Configurable Options – Control & Keys.
    • Capable for BACnet output for VFD Fan Control & Activation.
    • Contact for more information.
    View ProductDone
  • Crowngas MODBUS Addressable Gas Control Panel

    Digital Gas Detection Controller (192)

    • Macurco Addressable Gas Control Panel
    • Capable up-to 192 Gas Detectors (64 per channel)
    • Standard four relays (expandable up-to additional +2 or +4 relays)
    • 3x 4-20mA Outputs for VFD Control
    • 4x 24Vdc Outputs for Alarm, Trouble & Remote Signalling
    • Support up-to 8 Zones.
    • BACnet IP
    • Contact for more information.
    View ProductDone

  • E2S – Explosion Proof Call Point

    • E2S Hazardous Area Call Points.
    • Available as break glass, push button or tool reset call points.
    • SIL 2 Compliant MCP Available as aluminium, GRP or 316 SS.
    • ATEX or IECEx certified Call Points – Explosion Proof.
    • Available with EOL / Series Resistors, diode or zener diodes c/w LED indicator.
    • Can be integrated in Existing Fire System or used for Shutdown in Gas Piping & Equipment’s.
    • Custom Tags & Labels on Stainless Steel Plate – For Application Indication.
    • Available Variants: GNExCP7 / STExCP8 / GNExCP6 / BExCP3 / D1xCP1 / GNExCP7 / STExCP8 / GNExCP7 / STExCP8 / GNExCP6 / BExCP3 / IS-CP4
    • Contact us for more info on supply & configuration.
    View ProductDone

  • E2S – Explosion Proof Loudspeaker

    • E2S Hazardous Area Loudspeakers.
    • For PA (Public Address) System.
    • Available in 15W & 25W Loudspeaker options.
    • Available in different colours.
    • ATEX Certified – Explosion Proof.
    • Multiple transformer tappings.
    • Enclosures: Flame Retardant GRP, PPS Glass Reinforced, LM6 Aluminium, SS 316.
    • Custom Tags & Labels on Stainless Steel Plate.
    • Available Variants: BExL PA Loudspeaker / GNExL PA Loudspeaker / STExL1 PA Loudspeaker / D1xL PA Loudspeaker / E2xL PA Loudspeaker.
    • Contact us for more info on supply & configuration.
    View ProductDone

  • E2S – Explosion Proof Sounders

    • E2S Hazardous Area Flare / Horn / Sounders
    • Available as Alarm Horn Sounders, Siren, Hooter or Bell.
    • Sounders with Telephone Relay Initiate / Horn for use with Hazardous Area Telephones.
    • Can be integrated into existing Fire Alarm System & Other Alarms / Hazardous signaling.
    • Enclosures: Flame Retardant GRP, PPS Glass Reinforced, LM6 Aluminium, SS 316.
    • Custom Tags & Labels on Stainless Steel Plate.
    • Available Variants: BExS Flare Horn/Sounder / BExS Radial Horn/Sounder / GNExS Flare Horn/Sounder / GNExS Radial Horn/Sounder / STExS Flare Horn/Sounder / STExS Radial Horn/Sounder / D1xS Flare Horn/Sounder / D1xS Radial Horn/Sounder / D2xS Horn Sounder / E2xS Flare Horn/Sounder / BExH Flare Siren / BExH Radial Siren / IS-mA1 Horn/Sounder / IS-A105N Horn/Sounder / IS-D105 Horn/Sounder.
    View ProductDone

  • E2S – Intrinsically Safe Panel Mount – Indicator & Buzzer

    • E2S Intrinsically Safe Panel Mount Indicator & Buzzer.
    • For Intrinsically Safe Control Panels & Switchgears.
    • Panel Indicator – Available in Red, Amber, Green, Blue & White.
    • Panel Buzzer – 90dB at 1m.
    • Can be powered using zener barrier or galvanic isolator.
    • Enclosure: ABS Thermoplastic.
    • Available Variants: IS-pA1 Panel Mount Sounder / IS-pB1 Panel Mount Indicator.
    • Mounting through standard 22.5mm Diameter.
    • Contact us for more information.
    View ProductDone
  • Explosion proof Sounder Beacon by E2S by Crowngas Qatar

    E2S – Intrinsically Safe Sounder Beacon

    • E2S IS-mC1 Beacon Sounder
    • For use in Zone 0 Areas.
    • 100dB Sounder with Multi-Tones & Stages.
    • 23Cd LED Light Output – Bright & Clear.
    • Multiple Lens Color Available – For Identification.
    • Available with Combine Alarm & LED Beacon.
    • Can be operated by single zener barrier or galvanic isolator.
    • IP 65 rated – For use in Outdoors to prevent dust or water ingress.
    • Explosion Proof – ATEX & IECEx approved.
    • QCD Approved – For use with Fire Alarm Systems.
    • Contact us for more information.
    View ProductDone
  • E2S MEDC Xenon or LED Beacon by Crowngas Qatar

    E2S – Xenon & LED Strobe Beacons

    • E2S Hazardous Area Beacons.
    • Explosion Proof – ATEX Certified.
    • 74Cd & 170Cd Option Available.
    • 5 Joule, 10 Joule, 15 Joule & 21 Joule Xenon Strobe Available.
    • Multi-Mode with Different Flash Rates – As per site specifications.
    • High output xenon strobe beacon – Bright & Clear.
    • Different colors available as per specifications.
    • DC & AC Powered – For Fire Alarm Systems or legacy systems.
    • Enclosure: ABS Plastic, Flame Retardant GRP, LM6 Aluminium, SS 316.
    • Available Variants: D1xB2 / GNExB2 / STExB2 / BExBG / D1xB2 / GNExB2 / STExB2 / GNExB1 / BExBG / D2xB1 / E2xB / IS-L101L LED Beacon / STExB2 Rotating Beacon.
    • Contact us for more information.
    View ProductDone

  • Eaton CEAG GHG273 Explosion Proof Switch

    • Eaton CEAG GHG273 Explosion Proof Switch.
    • Prevents arcing of enclosed switch in hazardous area.
    • Large grounding plate with captive cover screws.
    • Large surface area and actuator to ensure operation.
    • IP66 Ingress Protection with Labyringth Seal.
    • Luminescent label on switch for visibility in dark area.
    • Contact us for more information.
    View ProductDone

  • Eaton CEAG GHG51 Plugs and Sockets

    • Eaton CEAG GHG51 Explosion Proof Plugs & Sockets.
    • Plugs & Receptacles rated for Zone 1 & 2 Hazardous Area.
    • Offering best in class Wall Socket / Plug / Coupler.
    • Devices rated for 16A / 32A / 63A / 125A currents.
    • IP66 Ingress Protection for harsh & wet areas.
    • Mechanically interlocked plug & receptacles.
    • Color-coded cover & plug ensures easy identification.
    • Nickel-plated brass contacts ensure rust free operation.
    • Made with fiber reinforced nylon, SS & Brass contacts.
    • Contact us for more information.
    View ProductDone

  • Eaton CEAG GHG51 Sockets with LED Indicator

    • Eaton CEAG GHG51 Explosion Proof Socket with LED Indicator.
    • LED Status Indication certified for use in Zones 1, 2, 21 & 22.
    • IP66 Ingress Protection for Hazardous Area Use & Utilization.
    • Green LED Lamp indicators power supply state (line/load).
    • Indication is on when socket is connected to the mains.
    • Indication is on when the plug is correctly inserted & switched.
    • Contact us for more information.
    View ProductDone

  • Emergency Light

    • Emergency Light.
    • Low Heat & Low Maintenance
    • Low Power as per regulations.
    • 3 Hours Duration – Backup.
    • Nickel Cadmium Battery.
    • Wall or Ceiling Mount.
    • QCD Certified.
    View ProductDone
  • Custom Engineered Control Panel for more than 13 Gas Detectors Vortex by Crowngas Qatar

    Engineered Rack System (13+)

    • Crowcon Gas Control Panel
    • Custom PLC based Engineered Rack Systems
    • Can support 13 or more Detectors (Flexible) – Conventional System
    • Push Buttons & LED Display reading for each detector
    • MODBUS Compatible
    • SIL-1 Certified
    • Battery Backup / UPS
    • Available in Panel Mount / Wall Mount / Custom Rack Solutions
    View ProductDone

  • Engineering – Installation – Commissioning

    Crowngas Detection System offers End to End Solutions for Engineering, Installation & Commissioning for Fixed Gas Detection Systems. Installation and works include certified & optimal detector placements for easy access, engineering documentation preparation, maintenance & calibration while being in-line with industry standards and practices for gas detection systems.

    • We offer complementary site support & assistance for clients to carry out installation with their resources – As-built Drawings for quick installation.
    • Our design practices are in compliance with Shell DEP 32.30.20.11 Performance Standards & QatarEnergy Philosophy for Fire and Safety.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Flame Detector

    • Explosion Proof Flame Detector.
    • Flame Detecting Principle: UV/IR.
    • Enclosure: Metallic Type, Aluminium 6061.
    • FOV & Range: 100° Coverage Angle & 30m.
    • Operating Voltage: 24Vdc (17Vdc to 32 Vdc).
    • Relay Outputs for Fire, Fault & Warning Alarm.
    • 4-20mA Analog Signal Output / Conventional.
    • QCDD Approved for Fire Panel Integration.
    • Aluminium Mounting Bracket for 360° installation.
    • Optional: Sun shield & Air shield Accessories.
    • Contact us for more information.

    Flame Detector is suitable for Woqod LPG Storage Tank Flame Detection in Outdoor Area’s with several installation across Qatar. Contact us for more information & technical support.

    View ProductDone

  • Explosion Proof Gas Detector

    • Crowcon Xgard Fixed Gas Detector
    • Xgard Type 1 – Nylon: 0.5kg / Alloy: 1kg / 316 SS: 3.1kg
    • Xgard Type 2 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Xgard Type 3 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Xgard Type 4 – Aluminium: 1.5kg
    • Xgard Type 5 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Xgard Type 6 – Aluminium: 1kg / Stainless steel: 3.1kg
    • XgardIQ – Stainless steel 316: 5.5kg
    • TXgard-IS+ – Carbon Loaded Nylon Enclosure: 0.7kg
    • Flamgard Plus – Marine Grade Alloy / SS 316: 2.2kg
    • TXgard Plus – Marine Grade Alloy / SS 316: 2.2kg
    • Explosion Proof – ATEX Certified Fixed Gas Detector
    • Low-cost reliable Gas Detector – In Battery Rooms.
    • Available in Nylon GRP,  Aluminium, Marine Alloy or SS 316.
    • Ability to detect several ranges of flammable gases, toxic & oxygen.
    • 4-20mA Analog Signals – Direct PLC & Plant Integration.
    • Requires half-yearly calibration and system testing.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof M20 Glands

    • Explosion Proof M20 Glands.
    • For Hazardous Area Installations & Termination.
    • IP 66 & IP 68 Certified for outdoor installation.
    • Available in Variety of Material & Types.
    • Non-metallic & Metallic M20 Cable Glands.
    • Create tight weatherproof seals for secure glanding.
    • Armored & Non-armored M20 Cable Glands.
    • Available for other sizes – M16, M25, M32 & More.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Plugs

    • Crowngas offers Explosion Proof Plugs.
    • 3-pole, 4-pole & 5-pole Ex. Plugs.
    • For use in Zone 1 & 2 Hazardous Areas.
    • Impact resistant polyamide enclosure.
    • Fiberglass reinforced polyester – Ex. Certified.
    • Stainless steel AISI 316 L – ATEX Certified.
    • Rated for 16A / 32A /63A rated for 415V.
    • Ingress Protection: IP66.
    View ProductDone

  • Federal Signal Beacon

    • Federal Signal Beacon.
    • Available in 24Vdc & 120-240Vac Options.
    • Enclosure: Glass Reinforced Polyester (GRP).
    • Dome guard included with LED Beacon.
    • Standard M20 Entries (optional M25 Entry).
    • Field configurable flash patterns – 60 FPM.
    • IP66 Ingress Protection Enclosure Rated.
    • IP69K Compliant for Harsh Atmospheres.
    • Zone 1 & 2 Hazardous Area Equipment.
    • QCD Approved for Fire Alarm System.
    • Contact us for more information.
    View ProductDone
  • Flame Detectors SIL 2 ATEX by Crowngas Qatar

    FGard IR3 Flame Detector

    • FGard IR3 Flame Detector
    • Detect all Hydrocarbon Fires within 60m.
    • Heated windows to prevent condensation.
    • Smart System – Doesn’t Require Testing
    • SIL 2 Approved
    • FM Approved
    • ATEX Approved for use in Hazardous Areas
    • Enclosure: Copper free Aluminium or SS
    • Output: 4-20mA, Alarm & Fault Relays
    • HART Capable
    • Optional : Pole Mount Kit, Sunshield, Mounting Bracket, Flame Simulator Test Kit
    View ProductDone

  • Fire Alarm Spares & Parts

    • Fire Alarm Spares available for most brands.
    • Gent, Simplex, C-Tec, Apollo, Hochiki, Edwards EST, Notifier & Siemens, Tyco & More.
    • Smoke Detectors, Heat Detectors, PSU Spare, Network Cards, Loop Cards, Control Card, Obscuration Test Card Set, Input/Output Card, FO Network Card, MCP Spare Glasses, Test Key, BACnet Gateway Assembly, Main Control Card, Display, Loop Interface Card, Mains Powered Interface Card, BACnet Gateway Assembly, Legacy Cards (For Old Systems), MCC Control Card, Network Node Card.
    • Addressing Tool for Addressable Systems.
    View ProductDone

  • Fire and Gas Mapping

    Crowngas Detection System Offers 3D Fire And Gas Mapping Services.

    • 3D Depictions of Flame & Gas Detectors & their Effective Coverage.
    • Detection & Coverage for any Flame & Gas Detectors in the market.
    • Coverage to be based on manufacturer design specifications.
    • Optimal positioning & software optimization for installed detectors.
    • Support for 3D CAD Files – for direct & seamless integration.
    • Support for 2D CAD Files as well for Gas & Flame Detector Coverage.
    • Conversion of 2D to 3D CAD along with Detector Position.
    • 3D Field Coverage of Hazardous Field Layout by Gas & Flame Detector.
    • 3D Coverage of Process Equipment & Tanks by Gas & Flame Detector.
    • Used to determine congestion/overlap of detector coverage in any area.
    • Detectors based on manufacturer datasheet & information/field data.
    • Compliant with Shell DEP 32.30.20.11 Performance Standards.
    • Hazards or events (fire sizes & gas clouds) to be identified & provided.
    • Performance targets for the F&G Mapping based on the hazards known.
    • Comprehensive reports, data & zone coverage based on final drawings.
    • Contact us for more information.

     

    View ProductDone

  • Fire Blanket

    • Fire Blanket.
    • Made using Glass Fiber.
    • Box Version Available.
    • QCD Approved.
    View ProductDone

  • Fire Extinguisher

    • ABC Dry Powder Fire Extinguisher.
    • High grade Brass Valve with Rubber Hose.
    • 6kg Capacity – Other Volumes Available.
    • Simple Operation with Safety Pin.
    • Red Enclosure with Steel Body.
    • QCD Approved.
    View ProductDone

  • Firefighters Telephone

    • Firefighters Telephone – Voice Control.
    • Push to talk on the telephone handset.
    • Red colored enamel finish & color.
    • Armored cable or standard telephone cord.
    • LED indicator on the master station.
    • QCD Approved for use with VC Systems.
    View ProductDone

  • Flame Detection

    • Flame Detection System & Accessories.
    • Flame Detecting Principle: UV/IR.
    • Enclosure: Stainless Steel (SUS 316).
    • FOV & Range: 90° Coverage Angle & 30m.
    • Operating Voltage: 24Vdc (17Vdc to 32 Vdc).
    • Relay Outputs for Fire, Fault & Warning Alarm.
    • 4-20mA Analog Signal Output / Conventional.
    • QCDD Approved for Fire Panel Integration.
    • Aluminium Mounting Bracket for 360° installation.
    • Optional: Sun shield & Air shield Accessories.
    • Contact us for more information.

    Flame Detector is suitable for Offshore & Corrosive Environments with Saline Environments. With several installation across Qatar. Contact us for more information & technical support.

    View ProductDone

  • Flame Detector

    • Sense-ware Flame Detector
    • Available Variants: UV, IR, UV/IR.
    • Enclosure: GRP (Glass Reinforced Polymer), Corrosion Proof.
    • Explosion Proof – For installation in Zone 2 & Safe Areas.
    • Analog Output: 4-20mA Signals for PLC Integration.
    • Relay Output: For Fire Alarm Panel Integration.
    • Designed to detect all Hydrocarbon & Hydrogen fires.
    • QCD Approved – For Integration with Fire Alarm Systems.
    • Range: 23m with <10s Response Time for quick response.
    • LED Indicators: Green LED, Yellow LED & Red LED.
    • IP 65 Protection to prevent dust & water ingress.
    • Available with Swivel Mount for field angle mounting.
    • Test Lamp – For Testing & Maintenance of Detector.
    • Contact us for more information.
    View ProductDone
  • Flammable Gas Detectors Crowcon by Crowngas Qatar

    Flamgard Plus – Flammable Gas Detector

    • Flamgard Plus – Flammable Gas Detector.
    • For Hydrocarbon, Hydrogen, Petrol & Vapor Detection.
    • Non-Intrusive Calibration – No hot work permits required.
    • Added Fault & Alarm Relays.
    • IP65 Protection for use in outdoors.
    • Contact us for more information.
    View ProductDone

  • Flammable Gas Detection

    • Flammable Gas Detection System & Early Detection.
    • Detect flammable & explosive gases in confined spaces & industrial environments – Indoors & Outdoors.
    • Detect gases like Hydrogen (H2), Methane (CH4), LPG / Propane (C3H8), Ethylene (C2H4), Petrol Vapour & Other Organic Elements & Compounds.
    • Flameproof & Explosion Proof enclosures as per industry standard.
    • System in line with latest QCD, local & International Compliance.
    • Explosion Proof Gas Detectors for Zone 2, 1 & Zone 0 hazardous area.
    • Enclosures available in GRP, Marine grade Aluminium & 316 SS.
    • Long life sensors & Infrared options available for long sensor life.
    • List of detectable flammable gases provided as per site risk assessment.
    • Contact us for more information.
    View ProductDone

  • Flammable Gas Leak Detector

    • AGP 45 Flammable Gas Leak Detector
    • Handheld Detector – Pinpoint Flammable Leak Sources
    • Adjustable Tick Rate & Sensitivity Increases on Leak
    • Includes Audible & Visual Alarm Indicators
    • Contact us for more information.
    View ProductDone

  • Flashni – Sounder/Beacon

    • Flashni – Sounder/Beacon – Outdoor Unit
    • IP 65 Rated – Deep Base
    • Audio Visual Warning & Alarm
    • Flashni – Combination of Roshni & Xenon Beacon
    • High Sound Output & Visual Output
    • Polycarbonate Lens & ABS Base
    • QCD Approved.
    View ProductDone

  • FP200 – Fire Resistant Cable

    • FP200 Standard Fire-Resistant Cable
    • QCD Certified
    • 2C, 3C or 4C Cable
    View ProductDone

  • FSL100 Flame Detector

    • FSL100 Flame Detector – UV, UV/IR and IR3 for safe area / hazardous industrial areas
    • FSL100-UV, FSL100-UVIR, FSL100-IR3
    • GRP Enclosure in Red or White c/w Optional Swivel Mount, IP 65 Certified
    • 4-20mA Analog Output for PLC & Gas Panel Integration
    • Relay Output for Direct Fire Panel Integration
    • Detect Flammable Gas & other Hydrocarbon Sources
    • QCD Approved & Explosion Proof
    View ProductDone
  • Low Cost LPG Gas Detector for Fire Panel Integration by Crowngas Qatar

    Gas Detector

    • Safe Area Gas Detector.
    • Gas Detector available with Gas Panel / Controller.
    • Calibrated to detect LPG, CO, Toxic & Flammable Gas.
    • Flame Detectors available for Zone 2 Areas with QCD.
    • To be used in non-hazardous areas.
    • Basic Ingress Protection from Sun, Water & Dust.
    • Half yearly calibration & maintenance.
    • Contact us for more information.
    View ProductDone

  • Gas Detector Calibration

    • Gas Detector Calibration – Field Calibration.
    • Annual Maintenance – 24×7 On Call Services.
    • Quarterly Bump Testing & Gas Detector Test.
    • On-site & Field Calibration Services.
    • Half Yearly Comprehensive Calibration & Maintenance.
    • Training & Operation – For End User & Safety Personnel.
    • Upgradation & Replacement of EOL (End of Life) Units at cost.
    • Attested Calibration Reports & Factory Acceptance.
    • Authorized Calibration & After-market service provider.
    • Support for Major Gas Detectors in Market.
    • Testing using certified calibration gas.
    • Contact us for more information.

     

    View ProductDone