Brand

Crowngas Provides Sale & Service of the Following Brands

Showing all 84 results

  • Addressable Gas Detection Controller Crowcon Make by Crowngas Qatar

    Addressable GM64 Gas Panel

    • Crowcon GM64 Addressable Gas Panel
    • Support for 64 Addressable Gas Detectors – in single panel.
    • Support for up-to 16 / 64 / 128 Fixed Gas Detectors.
    • GM16 / GM64 / GM128 Available in Different Configurations.
    • 4-20mA Analog & RS-485 MODBUS Standard Communication.
    • Direct Web page live feed communication – For BMS Integration.
    • Multiple Data & Zone Screens available – Real Time Readings.
    • Available in Fiberglass Enclosures, 19″ rack mount or aluminium.
    • Contact us for more information.
    View ProductDone

  • Air Quality Monitoring Station

    • Air Quality Monitoring Station for Fixed Installation in Qatar.
    • Continuous odor pollutant & emission monitoring system.
    • Industrial units with highly configurable gas sensor options.
    • Unit calibrated to detect CO (Carbon monoxide), CO2 (Carbon dioxide), NO (Nitric Oxide), NO2 (Nitrogen Dioxide), O3 (Ozone), SO2 (Sulphur Dioxide), H2S (Hydrogen Sulphide), NH3 (Ammonia), CH4 (Methane), VOC (Volatile Organic Compounds) & HCL (Hydrogen Chloride) – Toxic Gases.
    • Unit can detect PM (Particulate Matter) ranging from PM1, PM2.5, PM4, PM10, TSP and TPC. Micro-particulates are harmful for breathing.
    • Atmosphere probe sensors can be integrated in the unit not limited to temperature, humidity, atmosphere pressure & dew point.
    • Integrated solar panel and battery charger for wireless operation.
    • Optional remote cloud data transmission via eSIM / SIM allow for remote monitoring & status of locations located in faraway places.
    • Integrated multi-band 2G/3G/4G, Ethernet & Modbus available.
    • Factory configurable chart & data-plots for Air Quality Index.
    • Contact us for more information.
    View ProductDone

  • AIR4 – Room Air Quality Monitor

    • AIR4 – Room Air Quality Monitor & Transmitter.
    • Sensor identifies VOCs like smoke, odors, bio-effluence & pollutants.
    • 20-28 Vac/dc for BMS or HVAC Integration.
    • Smart unit for automatic calibration.
    • LED Indicator displaying status of air quality.
    • Negligible over specified operating range.
    • Contact us for more information.
    View ProductDone

  • Automatic Calibration Station for Portable Gas Detector

    • Crowngas Offers Automatic Calibration / Bump Test Station
    • To Manage Calibration of Large Portable Network
    • Station can be Mains or Battery Powered
    • Store & Manage Alarm Levels from a single point.
    • Logged Information for Pass / Fail of each portable
    • Collect all Alarms & Event Logs from Individual Portable.
    • Doesn’t require trained technician for Calibration.
    • Save cost & time by utilizing Automatic Calibration Station.
    • Comprehensive Auditable Reports on Each Portable.
    • PC Connection / Backup in USB.
    • Contact us for more information.
    View ProductDone

  • Bartec Feam Enclosures

    • Bartec Feam Enclosures – Aluminium or Stainless-Steel c/w SS Screws
    • For use in Zone 1, 2, 21 & 22 Hazardous Areas
    • Custom designed by Factory as per client requirements & design.
    • Custom design assembly, approval & certification for assembled system.
    • Enclosure to be used for transformers, junction box reactors, barriers, control & signaling boards etc.
    • Material Either Marine Grade Copper Free Aluminium Light Alloy or Stainless Steel AISI 316L
    • Optional – Cast Iron Body / Cover, Anti condensate Orange Painting, Glass Windows, Drain & Breather Valves
    • Contact for more information.
    View ProductDone

  • CO2 Leak Detector

    • IAQ8494 Ambient CO2 Detector
    • Handheld Device to measure CO2 levels.
    • Can be used to measure CO2 Leaks in MGPS.
    • CO2 Gas Lines – Leak Detection and Point Sources.
    • 0 – 9,999ppm level reading.
    • Backlit display & adjustable audible alarm.
    • Capable of measuring ambient temperature.
    • Includes Adaptor & carry case.
    • Contact us for more information.
    View ProductDone
  • Crowngas Area Gas Monitor

    Crowcon Detective Plus Area Gas Monitor

    • Crowcon Detective+ Transportable Area Gas Monitor.
    • Multi-area gas monitors for work in temporary areas.
    • Required in confined spaces/maintenance/shutdown areas.
    • Optional Pump for Gas Sampling & Enclosed Space Check.
    • Built in alarm sounder and multiple beacons for local alert.
    • Built in Display for Real Time Readings & Event Logging.
    • Can be networked to setup a perimeter or secure an area.
    • Available in Wireless* mode for signal transmission.
    • Capable of networking up-to 25 Detective+ area gas monitors.
    • Contact us for more information.
    View ProductDone
  • Gasmaster 4 Channel Control Panel for Gas Detectors by Crowngas Qatar

    Crowcon Gasmaster 4 Channel Gas Control Panel

    • Crowcon Gasmaster 4 Channel Gas Control Panel.
    • Capable up-to 4 Oxygen, Toxic or Flammable Gas Detectors.
    • Each detector assigned 2 levels of independent alarm.
    • Push buttons and LED Display enable easy operation.
    • Functional Certification & Capable – SIL 2 Certified.
    • RS-485 MODBUS communication for DCS/PLC/SCADA.
    • Battery Backup – For operation in case of power failure.
    • Fire Alarm Control Panel Integration & Networking.
    • Event Logger – To Measure, Fire, Gas & Fault Alarms.
    • Contact us for more information.
    View ProductDone

  • Crowcon Gasmonitor Plus

    • Crowcon Gasmonitor Plus – Rack Mount Gas Detection Panel.
    • Modular System Cards for Fire & Gas Detection System.
    • Systems can be integrated into custom rack mount panel 3U.
    • Integrate 4-20mA Toxic, Flammable & Oxygen Gas Detectors.
    • Relay output with configuration as required for A/V & Outputs.
    • Customized voting parameters for flexible output control signals.
    • Integrate up-to 20 conventional smoke & heat detectors directly.
    • Integrate up-to 16 gas detectors per rack / interchangeable for fire.
    • 4-20mA Analogue Outputs or 24Vdc Audio Visual Alarm Drive unit.
    • Power: 240Vac 60Hz with battery or Optional 24Vdc powered unit.
    • Suitable for use in shelter, refuge centers or rack mount applications.
    • Systems are highly scalable, modular and flexible based on demand.
    • SIL 2 Approved for highly demanding safety & failure free operation.
    • Contact us for more information.
    View ProductDone

  • Crowcon IRmax Infra-Red Gas Detector

    • Crowcon IRmax Infrared Flammable Fixed Gas Detector
    • Wall Mounting & Pipe Mounting with Suitable Accessories.
    • 4-20mA Analog Output for Integration with Control System.
    • Optional – HART & RS-485 MODBUS for Addressable System.
    • SIL 2 Rated for Process & Functional Safety Equipment’s.
    • ATEX Certified for use in Explosive Atmospheres & Offshore.
    • Enclosure: Stainless Steel 316 c/w Optional Display.
    • Contact us for more information.
    View ProductDone

  • Crowcon Spares

    Crowngas has the following availability of Crowcon Spares.

    • Crowcon LPG (0-100% LEL) Xgard Type 3 / Type 5 Replacement Pellistor VQ21T – S011522/S.
    • Crowcon Ethane (0-100% LEL) Xgard Type 3 / Type 5 Replacement Pellistor VQ21T – S011520/S.
    • Crowcon Hydrogen Sulphide (0-50ppm) Xgard Type 1 Type 2 Replacement Sensor – S011614/S.
    • Crowcon Hydrogen (0-100% LEL) Xgard Type 3 / Type 5 Replacement Pellistor VQ21T – S011513/S.
    • Crowcon Oxygen (0-25% Vol) Xgard Type 1 / Type 2 Replacement Sensor – S011265/S.
    • Crowcon Gasmonitor Universal Gas Detector Input Module – S01718/3.
    • Crowcon Xgard Type 5, IR and Xsafe mA Amplifier PCB (flammable, 4-20mA) – S011242/2.
    • Crowcon Xgard Type 1 and Type 2 Amplifier PCB Oxygen – S011240/2.
    • Crowcon Vortex Quad Channel Input Module – S01935.
    • Crowcon Vortex Eight Channel Relay Module – S01939.
    View ProductDone
  • Intrinsically Safe Gas Detector by Crowngas

    Crowcon TXgard-IS+ Toxic & Oxygen Gas Detector

    • Crowcon TXgard-IS+ Toxic & Oxygen Gas Detector.
    • Intrinsically Safe Fixed Gas Detector (with Isolator)
    • Local LCD Display – Clear Display with menu options.
    • Used to detect Toxic Gases & Oxygen Levels.
    • Explosion Proof (ATEX) Certified for Zone 0 areas.
    • Capable of Detecting H2S, NH3, O2 & Toxic Gases.
    • 4-20mA Signal – For Analog Signal to PLC or BMS.
    • Calibration to be performed manually on field.
    • Can be used as sampling detector with flow adaptor.
    • Strong, sturdy carbon loaded nylon enclosure with IP65.
    • Contact us for more information.
    View ProductDone
  • Addressable Gas Detector Xgard Bright by Crowngas Qatar

    Crowcon Xgard Bright

    • Xgard Bright – Flammable, toxic gas & oxygen monitoring.
    • Available in ADC12 Aluminium Alloy Enclosure Material.
    • IP65 Protection for use in Outdoors (Optional IP66)
    • Addressable Gas Detector for large area networks.
    • Clear OLED Display for use in sunlit / bright areas.
    • Magnetic non-intrusive calibration with key.
    • ATEX Certified for use in hazardous areas.
    • Built in Relays – Alarm 1, Alarm 2 & Fault.
    • Certified for use in Zone 1 & Zone 2 Areas.
    • Contact us for more information.
    View ProductDone
  • Cheap Nylon Case Gas Detector Xgard Make - Crowcon by Crowngas Qatar

    Crowcon Xgard Fixed Gas Detector

    • Crowcon Xgard Fixed Gas Detector
    • Xgard Type 1 – Nylon: 0.5kg / Alloy: 1kg / 316 SS: 3.1kg
    • Xgard Type 2 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Xgard Type 3 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Xgard Type 4 – Aluminium: 1.5kg
    • Xgard Type 5 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Xgard Type 6 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Explosion Proof – ATEX Certified Fixed Gas Detector
    • Low-cost reliable Gas Detector – In Battery Rooms.
    • Available in Nylon GRP,  Aluminium or SS 316.
    • Ability to detect several ranges of flammable gases, toxic & oxygen.
    • 4-20mA Analog Signals – Direct PLC & Plant Integration.
    • Requires half-yearly calibration and system testing.
    • QatarEnergy Approved for use in Gas Detection System.
    • Contact us for more information.
    View ProductDone

  • Crowcon Xgard Type 1 Intrinsically Safe Fixed Gas Detector

    • Crowcon Xgard Type 1 Fixed Gas Detectors.
    • Fixed Point Ex ia Intrinsically Safe Toxic & Oxygen Detectors.
    • Uses an electrochemical sensor to provide 2-wire 4/20mA Output.
    • Operating temperature between -40°C to +50°C & humid spaces.
    • Xgard Type 1 has standard GRP Enclosure – Glass Reinforced Nylon.
    • GRP Polymers are chemically resistant & cost effective for wide use.
    • Optional Accessories include spray deflector, flow adaptor & W/P caps.
    • Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
    • Offering Calibration, Sensor & Component Spares, Replacement.
    • Contact us for more information.
    View ProductDone

  • Crowcon Xgard Type 2 Flameproof Toxic & Oxygen Detector

    • Crowcon Xgard Type 2 Flameproof Fixed Gas Detectors.
    • Type 2 Exd Flameproof Toxic & Oxygen Detectors.
    • Uses an electrochemical / pellistor sensor for gas detection.
    • Operating temperature between -40°C to +50°C & humid spaces.
    • Xgard Type 2 has standard Aluminium Enclosure – Rigid & Strong.
    • Aluminium enclosures are highly durable with tough polyester coat.
    • Accessories available for duct mounting & sampling applications.
    • Optional Accessories include spray deflector, flow adaptor & W/P caps.
    • Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
    • Offering Calibration, Sensor & Component Spares, Replacement.
    • Contact us for more information.
    View ProductDone

  • Crowcon Xgard Type 3 Flammable Gas Detector

    • Crowcon Xgard Type 3 Fixed Gas Detectors.
    • Exde Flameproof Flammable Explosion Proof Gas Detectors.
    • Uses poison resistant 3-wire pellistor sensor for flammable gas.
    • Operating temperature -40 to +80°C & humid conditions installation.
    • Optional Accessory Enclosure required for connection – For easy zero/cal.
    • Aluminium Enclosure with Polymer coating as standard – ATEX Certified.
    • Optional Accessories include spray deflector, flow adaptor & W/P caps.
    • Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
    • Offering Calibration, Sensor & Component Spares, Replacement.
    • Contact us for more information.
    View ProductDone

  • Crowcon Xgard Type 4 Flammable Gas Detector

    • Crowcon Xgard Type 4 High Temperature Flammable Gas Detectors.
    • Exd Flameproof Flammable Gas Detectors use poison resistant sensors.
    • Detector comes in either 316 Stainless Steel or Aluminium Housing.
    • Contains terminals for 3-wire mV Wheatstone Bridge Output.
    • Operating Temperature of -20°C to 150°C for a wide operating range.
    • Optional Accessory Enclosure required for connection – For easy zero/cal.
    • Aluminium Enclosure with Polymer coating as standard – ATEX Certified.
    • Optional Accessories include spray deflector, flow adaptor & W/P caps.
    • Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
    • Offering Calibration, Sensor & Component Spares, Replacement.
    • Contact us for more information.
    View ProductDone

  • Crowcon Xgard Type 5 Flameproof Gas Detector

    • Crowcon Xgard Type 5 Flammable Gas Detector.
    • Consists of poison resistant pellistor sensor for flammable gases.
    • Built-in amplifier unit to provide 3-wire 4-20mA Analog Output.
    • Operating temperature between -40°C to +55°C wide temperatures.
    • Aluminium Enclosure with Polymer coating as standard – ATEX Certified.
    • Optional Accessories include spray deflector, flow adaptor & W/P caps.
    • Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
    • Offering Calibration, Sensor & Component Spares, Replacement.
    • QCD approved for integration with fire alarm systems.
    • Contact us for more information.
    View ProductDone

  • Crowcon Xgard Type 6 Flammable Gas Detector

    • Crowcon Xgard Type 6 Fixed Gas Detectors.
    • Type 6 is designed to Detect % VOL Levels of Flammable Gases.
    • Uses thermal conductivity sensor within metallic enclosure (ATEX).
    • Operating temperature +10°C to +55°C & humid conditions installation.
    • Aluminium Enclosure with Polymer coating as standard – ATEX Certified.
    • Optional Accessories include spray deflector, flow adaptor & W/P caps.
    • Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
    • Offering Calibration, Sensor & Component Spares, Replacement.
    • Contact us for more information.
    View ProductDone

  • Double Action Pull Handle MCP

    • Double Action Pull Handle MCP – Manual Call Point Range.
    • Double Action Type Prevents False or Accidental Activation.
    • Type 1: Lift Flap & Pull Handle for Alarm Activation & Signal.
    • Type 2: Push Bar & Pull Handle for Alarm Activation & Signal.
    • Switch Type: Single Changeover or Double Changeover (DPDT).
    • Material: GRP, Marine Grade Alloy & Stainless-Steel Fixings.
    • Temperature: -55°C to +70°C for use in offshore & refineries.
    • Eaton MEDC Variant: PH1 Range Pull Handle Manual Call Point.
    • E2S Variant: D1xCP1-PS Explosion Proof Manual Pull Station.
    • SIL2 Approved Variants available for highly redundant systems.
    • Contact us for information.
    View ProductDone
  • Custom Engineered Control Panel for more than 13 Gas Detectors Vortex by Crowngas Qatar

    Engineered Rack System (13+)

    • Crowcon Gas Control Panel
    • Custom PLC based Engineered Rack Systems
    • Can support 13 or more Detectors (Flexible) – Conventional System
    • Push Buttons & LED Display reading for each detector
    • MODBUS Compatible
    • SIL-1 Certified
    • Battery Backup / UPS
    • Available in Panel Mount / Wall Mount / Custom Rack Solutions
    View ProductDone

  • Explosion Proof Beacons

    • Explosion Proof Beacons – Hazardous Area Rated – Safety & Telecom.
    • Beacons available in Xenon Lamp or LED Type for High Light Output.
    • Enclosure: GRP, Marine Grade Alloy or Stainless Steel 316L (SS 316L).
    • Beacons are available in strobe, rotating, flashing & steady configuration.
    • High Temperature Units as per indoor or outdoor installation & mounting.
    • Marine listed for vessel and offshore applications in saline environments.
    • SIL 1 and SIL 2 Safety Level Rated Beacons – Ensure Safe Operation.
    • Zone 1 & Zone 2 Hazardous Area rated for fire alarm & visual signaling.
    • Eaton MEDC: MEDC XB15, MEDC XB9, MEDC XB8, MEDC XB4, MEDC XB13, MEDC XB12, MEDC TH12, MEDC XB87LED, MEDC SM87HXB, MEDC LD15 – Eaton Crouse Hinds Rated Explosion Proof Xenon and LED Beacons.
    • E2S: E2S D1xB2, E2S GNExB2, E2S STExB2, E2S BExBG, E2S D1xB2, E2S GNExB2, E2S STExB2, E2S GNExB1, E2S BExBG, E2S D2xB1, E2S E2xB, E2S IS-L101L LED Beacon, E2S STExB2 Rotating Beacon – E2S Visual Signals.
    • Federal Signal: G-STR Strobe Beacon, 154XSTHI, 224XTSHI, FB245THI.
    • Units available with QCD (Qatar Civil Defense) Approvals for Fire Alarm.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Beam Detector

    • Explosion Proof Beam Detector – Optical Smoke.
    • Fireray 3000 Explosion Proof & Flameproof Unit.
    • Unit certified for use in Zone 2 Hazardous Areas.
    • Working involves a transmitter head and receiver.
    • Range is between 10-80 meters between detectors.
    • Enclosure: Copper free Aluminium Alloy LM25, Red.
    • Optional controller for power, signal & alarm – Fire.
    • Controller supports up-to 2 sets of detectors/receiver.
    • Integrated Laser Alignment in Receiver Unit as required.
    • Fire & Fault Relay Contacts in Optical Beam Detector.
    • QCD Approved for use with Fire Alarm Systems.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Break Glass Manual Call Point

    • Explosion Proof Break Glass MCP – Manual Call Point.
    • Conventional Type Break Glass MCP for Hazardous Areas.
    • Available in Replaceable Break Glass or Plastic Element.
    • MCP used to raise alarm during fire, gas release or ESD.
    • Eaton MEDC Crouse Hinds Models: BG, BG2, BG3, SM87BG.
    • E2S Models: GNExCP7, STExCP8, GNExCP6, BExCP3, IS-CP4.
    • Enclosure: GRP, Marine Grade Aluminium Alloy or SS 316.
    • IP Rating: IP66 / IP67 Weatherproof and corrosion proof.
    • Switch Type: Single Changeover or Double Changeover.
    • Color: Red (standard), black, blue or as per choice/demand.
    • Optional: LED Indicator, Series Resistance, EOL & Diode.
    • SIL 2 Certification for use with Fail-Safe Systems & Alarm.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Control Stations

    • Explosion Proof Control Stations – For Control & Signaling.
    • Designed for use in Zone 1 and 21 Areas – Harsh Environment.
    • Control units are custom specific and as per requirements.
    • Enclosure: Corrosion-resistant FRP or Stainless Steel 316L.
    • Ex. certified Signal Lamps, pushbuttons & switches to be used.
    • Custom built units are fully configured and engineered to order.
    • Bartec ComEx – Control Stations for Hazardous Area Applications.
    • Eaton CEAG GHG41 GHG43 GHG44 – Ex. Proof Control Stations.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Enclosures

    • Explosion Proof Enclosures – Certified for hazardous areas.
    • Material: Marine Grade Aluminium or Stainless Steel 316L.
    • Optional: FRP (Fiber Reinforced Plastic) – Non-metallic Box.
    • Rated for installation in Zone 1 / 2 (Gases), Class I & II.
    • Color: Standard Grey but optional color options available.
    • Corrosion-free, acid resistant, weatherproof up-to +80 °C.
    • Empty Enclosures with mounting plate are available for use.
    • Enclosures are certified only for mechanical integrity of unit.
    • Bartec EJB Enclosure – Custom Designed Flameproof Units.
    • Eaton Crouse-Hinds EJB Enclosure – Explosion Proof Boxes.
    • Appleton ATX – Flameproof Enclosures with custom outlets.
    • Rittal Ex – Enclosures in Plastic/SS with Screw/Hinge Cover.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Gas Detector

    • Crowcon Xgard Fixed Gas Detector
    • Xgard Type 1 – Nylon: 0.5kg / Alloy: 1kg / 316 SS: 3.1kg
    • Xgard Type 2 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Xgard Type 3 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Xgard Type 4 – Aluminium: 1.5kg
    • Xgard Type 5 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Xgard Type 6 – Aluminium: 1kg / Stainless steel: 3.1kg
    • XgardIQ – Stainless steel 316: 5.5kg
    • TXgard-IS+ – Carbon Loaded Nylon Enclosure: 0.7kg
    • Flamgard Plus – Marine Grade Alloy / SS 316: 2.2kg
    • TXgard Plus – Marine Grade Alloy / SS 316: 2.2kg
    • Explosion Proof – ATEX Certified Fixed Gas Detector
    • Low-cost reliable Gas Detector – In Battery Rooms.
    • Available in Nylon GRP,  Aluminium, Marine Alloy or SS 316.
    • Ability to detect several ranges of flammable gases, toxic & oxygen.
    • 4-20mA Analog Signals – Direct PLC & Plant Integration.
    • Requires half-yearly calibration and system testing.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Loudspeaker

    • Explosion Proof Loudspeaker – E2S, MEDC & DNH AS.
    • Loudspeaker Power Ranges: 8W, 15W, 25W & more.
    • Temperature Ranges: -60°C to +85°C for wide range.
    • Protection: Weatherproof Type with IP65, IP66 & IP67.
    • Material: Marine grade alloy or stainless-steel option.
    • Wide range of SPL (Sound Pressure Level) availability.
    • Color: Standard Red or Black, Optional Color Choices.
    • E2S Models: BExL, GNExL, STExL1, D1xL, D2xL& E2xL.
    • Eaton MEDC Models: DB4B, DB4BM, DB10 & DB20.
    • DNH AS Models: DSP-15, DSP-25, HS-15 & MF Models.
    • Federal Signal Models: ASHX, ASUX, 300X, ASHH & ASUH.
    • Redundancy: SIL2 Approved Models for Fire Alarm Systems.
    • Suitable for digital voice message & live public addressing.
    • Contact us for more info on supply & configuration.
    View ProductDone

  • Explosion Proof Pull Stations

    • Explosion Proof Pull Stations – Pull Handle Type.
    • Conventional Type Pull Station Call Point for Hazardous Areas.
    • Ideal for use in extreme weather and corrosive environments.
    • Pull Station available in two types – lift & pull or push & pull.
    • IP Rating: NEMA Type 4X & IP66/67 Weatherproof Protection.
    • Color: Standard Red, Optional Blue, Yellow or Custom Colors.
    • Enclosure: Cast Aluminium or Glass Reinforced Polyester (GRP).
    • SIL 2 Compliant to maintain functional integrity of fire alarm system.
    • Entries: 3/4″ NPT, 1/2″ NPT or Standard M20 Entries with Adaptors.
    • Custom Labels, tags & equipment tags in stainless steel plates.
    • Optional Accessories: Pole Mount Bracket Kit or Sunshade Kits.
    • QCD Approved – Qatar Civil Defense approved models available.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Push Button

    • Explosion Proof Push Button – Manual Call Point Range.
    • Suitable for use in Fire Alarm Systems & Suppression Devices.
    • Type 1: Tool Reset Manual Station Call Point for Confirmed Fire.
    • Type 2: Turn & Push Type for Double Action Redundant Signaling.
    • Type 3: Momentary Latching / Self Reset Type Push Buttons.
    • Switch Type: Single Changeover or Double Changeover (DPDT).
    • Material: GRP, Marine Grade Alloy & Stainless-Steel Fixings.
    • Temperature: -55°C to +70°C for use in offshore & refineries.
    • Eaton MEDC Variant: MEDC PB & MEDC SM87PB MCP Range.
    • E2S Variant: GNExCP7, STExCP8, GNExCP6, BExCP3 & IS-CP4.
    • SIL2 Approved Variants available for highly redundant systems.
    • Contact us for information.
    View ProductDone

  • Explosion Proof Sounder Beacon Units

    • Explosion Proof Sounder Beacon Units – Combination AV.
    • Integrated Audio-Visual Units for Hazardous Areas Signaling.
    • ATEX Certified for use in Harsh Explosive Atmospheres.
    • Combination units can be used for telephone signaling.
    • Beacons are of xenon strobe type with 21 Joule output.
    • Integrated sounders have a maximum sound of 125dbA.
    • Enclosure: GRP, LM6 Aluminium, 316 Stainless Steel type.
    • Intrinsically safe units are available for use with IS Barrier.
    • Units are corrosion proof with an IP 66 / 67 protection.
    • Custom fixture lights are available for Fire, Gas & Sounder.
    • Signaling lights with custom colors and SS nameplates.
    • Option: Factory Certified Units or Custom Configured.
    • Available MEDC: MEDC CU1, CU1S, CU1SP, CU1H, CU1HP.
    • Available E2S: BExCS, D1xC, STExC, IS-mC1, D2xC2, D2xC1, E2xC1.
    • QCD Certified units are available for use with fire alarm.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Sounders

    • Explosion Proof Sounders – E2S, MEDC & DNH AS.
    • Sounder Output: High Output Alarm Horn >120dB(A).
    • Temperature Ranges: -55°C to +85°C for wide range.
    • Protection: Weatherproof Type with IP65, IP66 & IP67.
    • Material: Marine grade alloy or stainless-steel option.
    • Color: Standard Red or Black, Optional Color Choices.
    • Type: Flare Horn / Radial Horn / Alarm Horn Sounder.
    • E2S Models: BExS, GNExS, STExS, D1xS, D2xS, E2xS.
    • Eaton MEDC Models: DB3B, DB3BM, DB5 & DB7.
    • Redundancy: SIL2 Approved Models for Fire Alarm.
    • Optional: Telephone Relay Initiate for telephones.
    • Custom Industry Standard Tones (28 Pre-Set Tones).
    • Contact us for more info on supply & configuration.
    View ProductDone

  • Explosion Proof Xenon Strobe Beacon 21J

    • Explosion Proof Xenon Strobe Beacon 21J.
    • For use in fire alarm systems & site offices.
    • Enclosure: Glass Reinforced Polyester (GRP).
    • Ingress Protection: IP66 & IP67, NEMA 4X.
    • Power: 230Vac Input with 1/2″ NPT Entries.
    • Flash Rate: 21 Joules & 60 Flashes/minute.
    • Certification: UL, ATEX, CSFM Approved unit.
    • Optional: Lens guard coming with backstrap.
    • Certified Temperature: –55ºC to +70ºC Weather.
    • QatarEnergy & QatarGas approved – MEDC XB12.
    • Contact us for more information.
    View ProductDone

  • Federal Signal Beacon

    • Federal Signal Beacon.
    • Available in 24Vdc & 120-240Vac Options.
    • Enclosure: Glass Reinforced Polyester (GRP).
    • Dome guard included with LED Beacon.
    • Standard M20 Entries (optional M25 Entry).
    • Field configurable flash patterns – 60 FPM.
    • IP66 Ingress Protection Enclosure Rated.
    • IP69K Compliant for Harsh Atmospheres.
    • Zone 1 & 2 Hazardous Area Equipment.
    • QCD Approved for Fire Alarm System.
    • Contact us for more information.
    View ProductDone
  • Flame Detectors SIL 2 ATEX by Crowngas Qatar

    FGard IR3 Flame Detector

    • FGard IR3 Flame Detector
    • Detect all Hydrocarbon Fires within 60m.
    • Heated windows to prevent condensation.
    • Smart System – Doesn’t Require Testing
    • SIL 2 Approved
    • FM Approved
    • ATEX Approved for use in Hazardous Areas
    • Enclosure: Copper free Aluminium or SS
    • Output: 4-20mA, Alarm & Fault Relays
    • HART Capable
    • Optional : Pole Mount Kit, Sunshield, Mounting Bracket, Flame Simulator Test Kit
    View ProductDone
  • Flammable Gas Detectors Crowcon by Crowngas Qatar

    Flamgard Plus – Flammable Gas Detector

    • Flamgard Plus – Flammable Gas Detector.
    • For Hydrocarbon, Hydrogen, Petrol & Vapor Detection.
    • Non-Intrusive Calibration – No hot work permits required.
    • Added Fault & Alarm Relays.
    • IP65 Protection for use in outdoors.
    • Contact us for more information.
    View ProductDone

  • Flammable Gas Leak Detector

    • AGP 45 Flammable Gas Leak Detector
    • Handheld Detector – Pinpoint Flammable Leak Sources
    • Adjustable Tick Rate & Sensitivity Increases on Leak
    • Includes Audible & Visual Alarm Indicators
    • Contact us for more information.
    View ProductDone
  • Low Cost LPG Gas Detector for Fire Panel Integration by Crowngas Qatar

    Gas Detector

    • Safe Area Gas Detector.
    • Gas Detector available with Gas Panel / Controller.
    • Calibrated to detect LPG, CO, Toxic & Flammable Gas.
    • Flame Detectors available for Zone 2 Areas with QCD.
    • To be used in non-hazardous areas.
    • Basic Ingress Protection from Sun, Water & Dust.
    • Half yearly calibration & maintenance.
    • Contact us for more information.
    View ProductDone
  • Crowcon Gasman Portable Gas Detector

    Gas-Pro – Multi-Gas Portable Detector

    • Crowcon Gas-Pro – Multi Gas Portable Detector
    • Support for up-to 5 Gas Sensors & Detection.
    • Support for large variety of toxic & flammable gases.
    • Display for real time readings – Clear & Precise.
    • Rechargeable – Explosion Proof Adaptor.
    • IP 65 and IP 67 protection – Prevent dust & water ingress.
    • Pumped & Diffusion Options – To check for confined spaces.
    • Bump & calibration reminders for HSE & Site compliance.
    • Contact us for more information.
    View ProductDone
  • Crowcon Gasman Portable Gas Detector

    Gas-Pro IR – Portable Gas Detector

    • Crowcon Gas-Pro IR – Portable Gas Detector
    • Detection of flammable gases using IR (Infrared).
    • Extremely accurate & reliable with increase safety.
    • Extremely durable in low oxygen environments.
    • Immune to sensor poisoning / inhibition & high levels of gas.
    • Useful in low oxygen or high concentration environments.
    • IP 65 and IP67 rated – to prevent water & dust ingress.
    • Explosion Proof – ATEX Certified for use in hazardous areas.
    • Ensure regular bump test & calibration for the portable.
    • Contact us for more information.
    View ProductDone
  • Single Channel for 1 Gas Detector Remote Control Box by Crowngas Qatar

    Gasflag – Single Detector Controller

    • Crowcon Gasflag – Single Channel Monitor.
    • Capable of monitoring one 4-20mA flammable, toxic or oxygen gas detector.
    • Can be used in LPG Monitoring or locations with 1 Gas Detector.
    • 3 Relay Outputs – For Alarm 1, Alarm 2 & Fault Relay Activation.
    • Rising & Falling Alarm Setpoints for Oxygen Detectors.
    • Two Rising Alarms for Flammable & Toxic Detectors.
    • Can be used for any 4-20mA Analog Gas Detector.
    • IP-20 Protection – Basic Protection from Dust.
    • Contact us for more information.
    View ProductDone
  • Crowcon Gasman Portable Gas Detector

    Gasman – Portable Gas Detector

    • Crowcon Gasman – Portable Single Gas Detector
    • Single Gas Detector – To Detect Single Gas.
    • Built in 95dB Alarm and easy to read display.
    • IP 65 rated – To prevent dust & water ingress.
    • Internal vibration during Alarm to alert user.
    • Available with Rechargeable & Non-Rechargeable.
    • Available in Several Toxic & Flammable Gas Options.
    • Contact us for more information.
    View ProductDone
  • Gasmaster 4 Channel Control Panel for Gas Detectors by Crowngas Qatar

    Gasmaster – Gas Control Panel

    • Crowcon Gasmaster – 1-4 Channel Control Panel.
    • Capable up-to 4 Oxygen or Toxic Gas Detectors.
    • Each detector assigned 2 levels of independent alarm.
    • Push buttons and LED Display enable easy operation.
    • Functional Certification & Capable – SIL 2 Certified.
    • Battery Backup – For operation in case of power failure.
    • Fire Alarm Control Panel Integration & Networking.
    • RS-485 MODBUS RTU – Network & BMS Integration.
    • Event Logger – To Measure, Fire, Gas & Fault Alarms.
    • Contact us for more information.
    View ProductDone

  • Greystone CERMC Series – Indoor Carbon Dioxide Detector

    • Greystone CERMC – Indoor Carbon Dioxide Transmitter
    • NDIR Sensor for Long Life CO2 Readings
    • 4-20mA Analog Output, MODBUS Outputs & Relay Outputs
    • Optional Temperature Sensor
    • Contact us for more information.
    View ProductDone

  • Greystone CMD5B1 – Carbon Monoxide (CO) Detector

    • Greystone CMD5B1000 & Other – CO Detector
    • 0-300ppm CO Range – For use in Carparks
    • Analog 4-20mA Output or MODBUS
    • AC or DC Power Options.
    • Inbuilt relay for low powered device activation.
    • Easy and quick calibration.
    • Contact us for more information.
    View ProductDone

  • Greystone CMD5B5 Series – Duct Carbon Monoxide Detector

    • Greystone CMD5B5 Series – Duct Carbon Monoxide Detector
    • Analog 4-20mA Output or BACnet & MODBUS Output
    • AC or DC Power Options
    • Range from 0-500 ppm (Ranges field adjustable)
    • Built in LCD for operation and use.
    • Front Panel Test Switch, Status Indicator & Buzzer
    • Replaceable Sensor
    • One / Two Alarm Relays & RS-485 Network Configuration.
    • Contact us for more information.
    View ProductDone

  • Greystone CR3 – Cleanroom Monitor

    • Greystone CR3 – Cleanroom Monitor
    • Measures Temperature, relative humidity & differential pressure sensors
    • Stainless steel enclosure
    • Integrated Sensor or Remote Sensor Options
    • Analog output – 4-20mA
    • MODBUS RTY & BACnet Network Integration
    • Red LCD Display
    • Three distinct displays for temperature, relative humidity & pressure.
    • Contact us for more information.
    View ProductDone

  • Hochiki LEAKalarm – Water Leak Detection

    • Hochiki LEAKalarm – Water Leak Detection System
    • Linear Detection (Wire Type) & Point Detection (Probe Type)
    • Types: Conventional System & Addressable System.
    • Conventional System: 2, 4 & 8 Zone Panels.
    • Addressable System: 2 Loop support for 25km Linear or 500 Probe Type.
    • BMS Integration & Relay Outputs / Contacts for FACP Integration.
    • Built-in Battery Backup & Fault Monitoring with Event Logs.
    • Voice Sounder for Water Leak (Custom Message Support)
    • Blue Beacon for Water Leak or Blue Remote LED Indicator.
    • Blue Manual Call Points for Shutdown of Plant Valves.
    • Site Specific Accessories & Design Elements for installation.
    • For use in Water Sensitive Equipment & Thermal Storage Tank.
    • Contact us for more information.
    View ProductDone

  • Integrated Fire & Gas Detection Systems

    • Crowngas offers integrated fire & gas detection systems solutions.
    • Turnkey engineered solutions for design, supply & commissioning.
    • Custom factory assembled fire & gas controllers & IFG Systems.
    • Modular controllers enable conventional fire zones & analog inputs.
    • IFG Systems designed & engineered for large builders to small cabins.
    • IFG System can optionally be mounted in Ex d’ ATEX certified enclosure.
    • Fire zone capable of taking Apollo I.S Smoke, Heat & MCP Devices.
    • Gas input capable for analog input of toxic, flammable & flame detectors.
    • Small IFG Systems suitable for use in custom shelters & porta-cabins.
    • Optional remote HMI for testing, action, reset & maintenance as required.
    • Contact us for more information.
    View ProductDone

  • LaserMethane Smart

    • LaserMethane Smart – Compact Methane Gas Detector
    • Shoots Laser at an Inspection Point
    • Logs measured value to an image and time.
    • Can be used at a distance of 30m Away.
    • Green Laser can also be used Outdoors.
    • Laser Beam uses IR Rays to obtain value.
    • Includes Bluetooth (Optional) & MicroSD.
    • For use with Methane or Natural Gases.
    • Range: 1 – 50,000 ppm.
    • Response Time in 0.1s
    • IP 54 Rated
    • Explosion Proof
    • Contact us for more information.
    View ProductDone

  • Marine Fire Detectors

    • Crowngas supplies Approved Marine Fire Detectors.
    • Detectors are DNV, BV, ABS & Lloyd’s rated & approved.
    • Ranges include smoke, heat, dual sensor & flame detectors.
    • Apollo Orbis Conventional Marine Approved Fire Detectors.
    • Apollo Discovery Marine Approved Fire & Flame Detectors.
    • Tyco Marine – Minerva Addressable Fire & Flame Detectors.
    • Consilium Salwico Fire & Flame Detectors – DNV Approved.
    • Eaton Crouse Hinds MEDC – Marine Fire Pushbutton & MCP.
    • Deckhead mount kits to prevent water entry into detector.
    • Marine rated devices are also suitable for use in offshore.
    • QCD Approved for use with Fire Alarm System.
    • Contact us for more information.
    View ProductDone

  • MEDC – Intrinsically Safe Xenon Beacons

    • MEDC XB8 Intrinsically Safe Beacons
    • Corrosion Resistant
    • Enclosure: GRP
    • High Intensity Flash
    • Clear Lens
    • Contact for more information.
    View ProductDone

  • MEDC – Safe Area Xenon Beacons

    • MEDC Safe Area Xenon Beacons
    • Available in Weatherproof for Outdoor Areas – IP 65
    • High Intensity Flash
    • Enclosure: Corrosion Resistant GRP
    • Optional Lens Guard
    • Multi Lens & Enclosure Colours Available
    • Contact for more information & design.
    View ProductDone

  • MEDC – Xenon Beacon

    • MEDC High Output Xenon Beacons
    • SM87HXB, XB11, XB12, XB15, XB4
    • Designed for use in Hazardous Areas
    • Enclosure: GRP, LM35 Aluminium, SS 316
    • SIL 1, SIL 2 Beacons Available
    • Various Lens Color, Enclosure, Flashing Rates & Outputs
    • 5J, 10J, 15 & 21 Joule Beacons
    • Custom tag & duty plates
    • Beacon / Sounder Combination unit Available
    • SS Screws
    • Contact for more information.
    View ProductDone
  • Sensitron SMART-3R Gas Detector for Safe Areas by Crowngas Qatar

    Multiscan 8+

    • Multiscan 8+ Gas Panel.
    • Monitor up-to 16 Gas Detectors – Conventional & Addressable.
    • 8 Conventional Gas Detector + 8 Addressable Gas Detector (RS485).
    • Support for 4-20mA Analog Signals & RS-485 MODBUS.
    • Event logging – For Alarm Monitoring & Signal Activation.
    • Battery back-up – Ensure Gas Detection is on in case of power failure.
    • Contact us for more information.
    View ProductDone

  • Multiscan++S2

    • Crowcon Multiscan++S2 Gas Control Panel
    • SIL 2 Certified for use in demanding areas.
    • Monitor & manage up-to 256 Gas Detectors.
    • Enclosure: ABS or Aluminium Rack
    • Support for 16 / 32 /   64 / 128 / 256 Inputs.
    • Support for 32 / 64 / 128 / 256 / 516 Outputs.
    • Internal Self-Test to detect failures.
    • Available in Panel & Rack Mount for use in custom racks.
    • Galvanic isolated loops for hazardous area installation.
    • Digital Communication between detectors.
    • Explosion Proof Certified for use in Hazardous Areas.
    • Built in event log & Status LED.
    • Contact us for more information.
    View ProductDone

  • Oil Leak Detectors

    • Fuel Oil Leak Detectors.
    • Sensors can be used to identify oil leaks and fuel leaks.
    • Passive leak detectors are mounted under the fuel tanks.
    • Sensors have adjustable height for accurate identification.
    • Surface mount or wall mount type brackets available.
    • System is available with control panel and accessories.
    • System can be seamlessly integrated into third party systems.
    • Contact us for more information.
    View ProductDone

  • Outdoor Air Quality Monitor

    • Outdoor Air Quality Monitor.
    • Measure Total Particulate Matter & Pollutants.
    • IP 65 Enclosure to prevent dust & water ingress.
    • Detect PM1.0, PM2,5., PM4.0 & PM10 Particles.
    • Analog, Digital, BACnet & MODBUS Integration.
    • 24 Vac/dc Power Supply Support – BMS & FACP.
    • Internal LCD Display & IAQ Value Index Display.
    • Ensure safe & secure working atmosphere.
    • Contact us for more information.
    View ProductDone

  • Rotating Beacons

    • Federal Signal Red Rotating Beacons.
    • Rated for 24Vdc Power Supply.
    • Integrated 1/2″ NPT Pipe & Surface Mount.
    • Rated for indoor & outdoor use.
    • IP66 Ingress Protection with Nema 4X Rated.
    • IP69K Compliant – For Adverse Locations.
    • Handle high pressure sprays & temperatures.
    • QCD Approved for Fire Alarm System.
    • Contact us for more information.
    View ProductDone
  • Environmental Sampling Units by Crowngas Qatar

    Sampling Gas Detector

    • Crowcon Environmental Sampling Unit / Sampling Gas Detector.
    • Low-cost Air Sampling Unit for HVAC & other critical Equipment.
    • Detection of toxic / flammable gases in hot, humid or dusty environments.
    • Single Point / Multi Point / Sequential / Aspirated Sample System.
    • Low & High Alarms signals to program Relays for Shutdown / AV Units.
    • Single Point – Gas Detector using Pellistor / IR Sensor for High Temps.
    • Multi Point – Made of Multiple Point for Environmental Gas Monitoring.
    • Engineered / Customized Solutions available certified for Hazardous Areas (with 1, 2 or 3 sensors) and Non-Hazardous Areas. Can be programmed for executive action based on detection from multiple detectors.
    • Contact us for more information.
    View ProductDone
  • Sensitron SMART-3R Gas Detector for Safe Areas by Crowngas Qatar

    SMART 3-R

    • Smart 3-R Gas Detector – For Flammable, Toxic & Oxygen Detection
    • Smart 3-R Lite Gas Detector – Refrigerant Detection
    • Multi-Colour LED Ring provides aesthetic visual indication.
    • Available with a variety of gas sensors & detection.
    • 4-20mA Analog Signal – Integration with Gas Panel / PLC.
    • Contact us for more information.
    View ProductDone

  • SMART 3G-C2

    • SMART 3G-C2 Fixed Gas Detector
    • Capable of detecting more than 50 types of Gases.
    • Toxic, Flammable, Oxygen & Refrigerant Gases.
    • Built-in Self Diagnosis for Fault Identification.
    • SIL 2 Certified.
    • ATEX Certified for use in Explosive Areas.
    • IP 65 Rated with Aluminium Enclosure.
    • Contact us for more information.
    View ProductDone

  • SMART 3G-D2

    • SMART 3G-D2 Fixed Gas Detector.
    • Can be used for flammable, toxic & refrigerant gases.
    • SIL 2 Certified & ATEX Certified for use in Explosion Proof Areas.
    • Non-intrusive Calibration using Magnetic keys.
    • Capable of SIL 3 Certification with applicable system.
    • Intrinsically Safe Version Available.
    • IP 65 Ingress Protection.
    • LCD Display, 5 Status LED & 4 Indicator LED.
    • 4-20mA Analog Outputs & RS485 Addressable Output.
    • Green LED Ring around Display for Alarm Status Indication.
    • Contact us for more information.
    View ProductDone

  • SMART S-MS 3A

    • SMART S-MS 3A Fixed Gas Detector.
    • Can be used for Flammable & Toxic Gases.
    • SIL 2 Approved.
    • Redundant system ensures SIL 3 Certification.
    • IP 65 Protection & Explosion Proof.
    • Enclosure: Aluminium or SS
    • 3 Relay Outputs for AL1, AL2 & Fault.
    • Optional HART.
    • Contact us for more information.
    View ProductDone

  • Smoke Detector Sensitivity Tester

    • Smoke Detector Sensitivity Tester.
    • Ensure detector is calibrated for specified levels.
    • Measures detector sensitivity and feeds back info to user.
    • Unit automatically self-calibrates prior to each testing use.
    • Unit is battery Operated & suitable for most detectors.
    • Requires specialized Smoke Aerosol (Aero 400) for testing.
    • Requires a control unit with the user with main unit.
    • Testing can be conducted in levels as desired by client.
    • Ensure optimal performance of smoke detectors.
    • TruTest 801 Smoke Detector Sensitivity Test Head.
    • TruTest 800 Smoke Detector Sensitivity Test Kit (6m).
    • AERO 400 TruTest Smoke Aerosol – Precision Testing.
    • Contact us for more information.
    View ProductDone

  • Solo 100 Telescopic Access Poles

    • Solo 100 Telescopic Access Poles.
    • Extension from 1.26m to 4.5m (6m total).
    • Made from strengthened durable fiberglass.
    • Lightweight and portable tester poles.
    • Non-conductive material for risk free use.
    • “TotalLock” system ensures sections never lock.
    • Increase Height using Solo 101 for max. height of 9m.
    • Designed for Smoke Detectors placed at tall ceiling.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone

  • Solo 200 Detector Removal Tool

    • Solo 200 Detector Removal Tool.
    • Universal Detector Removal Tool.
    • Remove Smoke & Heat Detectors with ease.
    • Ideal for removal of most types of detectors.
    • Enables removal & replacement of detectors.
    • Adjustable for different sizes of detectors.
    • Color coded for different sizes of detectors.
    • Universal joint so tool never bends when in use.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone
  • Sale!

    Solo 330 Aerosol Smoke & CO Dispenser

    • Solo 330 Aerosol Smoke & CO Dispenser.
    • QCD Approved for use with all detectors.
    • Quick & strong for aerosol delivery.
    • Transparent cup to view detector LED.
    • Use at variety of heights and angles.
    • Suitable for detectors up-to 177mm in diameter.
    • Height adjusting accessories & poles.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone

  • Solo 365 Smoke Detector Tester

    • Solo 365 Smoke Detector Tester
    • ‘Auto-start’ proximity sensor – faster testing, less smoke waste
    • Auto-LED torch – allows simple testing of detectors in dark areas
    • Slim-line design – easier access to detectors in confined spaces
    • Clearing mode – eliminates re-alarms, increasing productivity
    • Delayed start mode – for non-standard detectors and ASD systems
    • Included – 1 x Solo 365 Head Unit, 1 x Solo 370 Lithium-Ion Battery Pack, 1 x Solo 371 Smoke Generator, 1 x Solo ES3 Smoke Cartridge, 1 x Spare 1060 Charger & USB Lead
    • Additional Accessories Available – Multi Height Testers.
    • Contact us for more information.
    View ProductDone

  • Solo 461 Cordless Heat Detector Tester

    • Solo 461 Wireless Heat Detector Tester.
    • Industry-standard for testing heat detector.
    • Battery-powered c/w charger.
    • Immediate & fast activation.
    • Can be used for Fixed Temperature Heat Detector.
    • Can be used for Rate-of-rise Heat Detector.
    • Can be used for Multi-sensor or Combination Detector,
    • Two separate battery batons for continued use.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone
  • Sale!

    Solo 461 Heat Detector Tester Kit

    • Solo 461 Heat Detector Tester Kit.
    • Battery powered heat detector tester kit.
    • Can be connected to Solo Access poles to reach up-to 9 metres.
    • Heat is focused directly into the detector sensor for fast testing.
    • Can trigger majority of spot & point heat detectors into alarm.
    • Powered by battery baton fitted within the pole for cordless use.
    • Transparent cup for clear view of detector LED & activation.
    • Automatically goes into standby after 120s for protection.
    • Switches off completely after 5 minutes in standby.
    • Provided with 1x battery baton and 240V fast charger.
    • 3000mAh battery ensures longer testing per charge.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone
  • Sale!

    Solo A3 Smoke Detector Test Gas

    • Solo A3 Smoke Detector Test Can.
    • Hand-held Test Gas Can – Fast Results.
    • Delivers Smoke to Detector immediately.
    • Standard Product to Test Smoke Detectors.
    • UL Certified for use with Fire Alarm Testing.
    • Contact us for more information.

    Solo A3 is obsolete as of 2016, kindly use Solo A5.

    Solo A5 Smoke Detector Tester

    View ProductDone
  • Sale!

    Solo A5 Smoke Detector Tester

    • Solo A5 Smoke Detector Tester – Aerosol Type.
    • For use with Solo 330/332 Dispensers.
    • Manufacturer approved tester for use with smoke detectors.
    • Flammable – should be stored under room temperature.
    • Non-toxic & Silicone-free to prevent detector contamination.
    • 250ml Volume Capacity – For use with 330 Dispensers.
    • Ex-stock with same day delivery.
    • Contact us for more information.
    View ProductDone
  • Sale!

    Solo A7 Detector Duster

    • Solo A7 Detector Duster.
    • Pressure can to clean contaminated detectors.
    • Prevents false alarm & for fire alarm maintenance.
    • Removes most dust and dirt from detector chamber.
    • Volume: 250ml of Clean Gas Canister.
    • Non-flammable & simple to use.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone

  • Solo ES3 Smoke Catridges

    • Solo ES3 Smoke Cartridges.
    • Detector capable Smoke for Wide Range of Detectors.
    • Non-flammable, non-pressurized & non-hazardous.
    • Instant detector activation.
    • Compact design.
    • Ex-stock with same-day delivery.
    • Contact us for more information.
    View ProductDone

  • Solo Smoke and Heat Detector Tester and Removal Kit

    • Solo Smoke and Heat Detector Tester and Removal Kit.
    • Extension Pole can reach up-to 6m in height (4.5m).
    • Combined Travel Kit c/w Bag for Easy Use.

    Kit includes:

    • 1x Solo 330 – Aerosol Dispenser (Insert Solo A5)
    • 1x Solo A5   – Smoke Aerosol Canister (250ml)
    • 1x Solo 461 – Cordless Heat Detector Tester.
    • 1x Solo 100 – 4.5m Telescopic Access Poles.
    • 1x Solo 200 – Detector Removal Tool.
    • 1x Solo 610 – Protective Storage Bag.
    View ProductDone
  • Crowcon Gasman Portable Gas Detector

    T4 – Portable Gas Detector

    • Crowcon T4 – Multi Gas Portable Detector
    • Can be used to detect CO, H2S, Flammable & Oxygen.
    • Intuitive Menu System & Large Buttons.
    • Detection of most common gas hazards in enclosed spaces.
    • IP 65 & IP 67 rated – to prevent dust & water ingress.
    • 18 Hour Battery – For Prolonged Use.
    • Ensure regular bump test & calibration.
    • Contact us for more information.
    View ProductDone
  • Flammable Gas Detectors Crowcon by Crowngas Qatar

    TXgard Plus – Flameproof Detector

    • TXgard Plus – Flameproof Toxic & Oxygen Gas Detector
    • Local LCD Display for menu & magnetic key operation.
    • Explosion Proof – ATEX Certified for use in Hazardous Areas.
    • Non-Intrusive Calibration with custom Magnetic Key.
    • Added Fault & Alarm Relays – For Signaling & Alarm.
    • IP65 Protection for use in outdoors – dust & water.
    • Contact us for more information.
    View ProductDone
  • Vortex 12 Channel Gas Control Panel for Gas Detector by Crowngas Qatar

    Vortex – Gas Control Panel

    • Crowcon Vortex – Gas Control Panel.
    • Capable up-to 12 Oxygen, Toxic or Flammable Gas Detectors with (including 3 for Fire).
    • Each detector assigned 1 Fault Level & 3 Alarm Levels to trigger up-to 32 output relays.
    • Push buttons and LED Display enable easy operation – Real Time Gas Readings of Detectors.
    • Can be integrated with Manual Call Points & Other Safety Systems – Support for Fire Loops.
    • SIL 1 Certified – for use with Safety Instrumented Systems – Functional Safety & Integrity.
    • Battery Backup & MODBUS, RS-485 Integration – For BMS & Scada Integration – Networking.
    • Available in Wall Mount, 19″ Rack mount, Panel Mount – For all site requirements & design.
    • Custom design based for site approved design – for client’s custom PLC Board & Equipment.
    • Contact us for more information.
    View ProductDone
  • Flameproof LM35 Gas Control Panel Crowcon by Crowngas Qatar

    Vortex FP – Flameproof Gas Panel

    • Crowcon Vortex FP – Flameproof Gas Panel
    • Used in Hazardous areas – both onshore & offshore
    • Flameproof Gas Detector Control Panel
    • Made with LM25 Aluminium with polyester powder coating.
    • Support for up-to 12 Gas Detector (including 3 loops for fire – up-to 20 devices per loop)
    • Capable of up-to 32 relay outputs.
    • RS-485 MODBUS or PROFIBUS
    • Store up-to 300 alarm, power, fault, system events.
    • ATEX Certified – for use in Explosion Proof Areas
    • Available in FP or FP Compact
    • Contact us for configuration & consult.
    View ProductDone
  • Flameproof LM35 Gas Control Panel Crowcon by Crowngas Qatar

    Vortex FP Compact – Flameproof Gas Panel

    • Crowcon Vortex FP Compact – Flameproof Gas Panel
    • Used in Hazardous areas – both onshore & offshore.
    • Flameproof Gas Detector Control Panel.
    • Made with LM25 Aluminium with polyester powder coating.
    • Support for up-to 12 Gas Detector (including 3 loops for fire – up-to 20 devices per loop)
    • Capable of up-to 16 relay outputs – For Signaling, Fire Panel & PLC Integration.
    • RS-485 MODBUS or PROFIBUS – For BMS & SCADA Integration – Networking.
    • Event Logger – Store up-to 300 alarm, power, fault, system events.
    • Explosion Proof – ATEX Certified for use in hazardous areas.
    • Available in FP or FP Compact – Different Sizes & Designs.
    • Contact us for configuration & consult.
    View ProductDone
  • XgardIQ SIL2 Gas Detector by Crowngas Qatar

    XgardIQ – SIL 2 Gas Detector

    • XgardIQ – Fixed Addressable Gas Detector.
    • Used to detect flammable, toxic, oxygen or High Temperature H2S.
    • Infrared Sensors Available for Accurate Flammable Gas Detection.
    • IP 66 Ingress Protection – To prevent Water & Dust Ingress.
    • Remote Sensor Assembly Kits Available for Remote Sensor Placement.
    • Explosion Proof – ATEX Certified for use in Hazardous Areas.
    • SIL 2 Certified – For Performance & Equipment Integrity with DCS.
    • Local OLED Display – Clear & Bright Readings even in sunlight.
    • Enclosure: 316 SS – Corrosion Proof & Rust Proof in salty atmospheres.
    • Output: 4-20mA Signals & RS-485 MODBUS RTU – Analog & Digital.
    • Non-intrusive Calibration – Button Controls for quick and easy use.
    • Hot Swappable Sensors – Does not require Hot Work Permit.
    • LED Indicators for Detector Status, Fault & Power Indication.
    • Event logger – To measure continuous gas monitoring.
    • Contact us for more information.
    View ProductDone

  • Xsafe Fixed Gas Detector

    • Crowcon Xgard Fixed Gas Detector
    • Xsafe – 1kg
    • ATEX Certified Fixed Gas Detector
    • Low-cost reliable Gas Detector
    • Aluminium Enclosure.
    • Ability to detect several ranges of flammable gases.
    • Hydrogen, LPG, Methane, Ammonia & Other Organics.
    • 4-20mA Analog Signals – PLC & Plant Integration.
    • Contact us for more information.
    View ProductDone