Crowngas Product Page

Showing 85–136 of 136 results

LaserMethane Smart
- LaserMethane Smart – Compact Methane Gas Detector
- Shoots Laser at an Inspection Point
- Logs measured value to an image and time.
- Can be used at a distance of 30m Away.
- Green Laser can also be used Outdoors.
- Laser Beam uses IR Rays to obtain value.
- Includes Bluetooth (Optional) & MicroSD.
- For use with Methane or Natural Gases.
- Range: 1 – 50,000 ppm.
- Response Time in 0.1s
- IP 54 Rated
- Explosion Proof
- Contact us for more information.
View Product
Linear Heat Detector (LHD)
- Linear Heat Detector Cables – QCD Approved
- Can be directly integrated to any FACP.
- Available in 68°C, 88°C, 105°C, 185°C, 230°C.
- Comes in different sheaths based on applications.
- LHD Controller & Alarm Locator with LCD Display available.
- QCD Approved – Direct Integration to Fire Alarm Panel.
- Contact us for more information.
View Product
Liquid Hydrocarbon Leak Detection System
- Liquid Hydrocarbon Leak Detection System – Fuel Oils.
- Detection of all types of fuels, diesel and motor oils.
- Suitable for indoor & outdoor use with IP68 connector.
- Primary detection of diesel, jet fuel, motor & lube oils etc.
- Sensor cable capable of withstanding 100C Temperatures.
- Cables are reusable type by following cleaning procedures.
- Mechanical Protection: UV Rated, Braided & Anti-Rodent.
- Dedicated controller for detection of up-to 300m cables.
- Outputs: BMS/DCS/SCADA Integration & Relay Contacts.
- Optional Safety Barriers for use in Hazardous Locations.
View Product
Sale!
LPG Detector – QCD Approved
- Fixed LPG Gas Detector.
- Low-cost Combustible Gas Detector.
- For use in Kitchens & Indoors.
- Green & Red LED Status Indicators.
- Optional GD-2A Available with Local Buzzer.
- Can be Directly Integrated to Fire Panel (FACP).
- QCD Approved – For use with Fire Alarm System.
- Contact us for more information.
View Product
Marine Fire Detectors
- Crowngas supplies Approved Marine Fire Detectors.
- Detectors are DNV, BV, ABS & Lloyd’s rated & approved.
- Ranges include smoke, heat, dual sensor & flame detectors.
- Apollo Orbis Conventional Marine Approved Fire Detectors.
- Apollo Discovery Marine Approved Fire & Flame Detectors.
- Tyco Marine – Minerva Addressable Fire & Flame Detectors.
- Consilium Salwico Fire & Flame Detectors – DNV Approved.
- Eaton Crouse Hinds MEDC – Marine Fire Pushbutton & MCP.
- Deckhead mount kits to prevent water entry into detector.
- Marine rated devices are also suitable for use in offshore.
- QCD Approved for use with Fire Alarm System.
- Contact us for more information.
View Product
MEDC – Intrinsically Safe Xenon Beacons
- MEDC XB8 Intrinsically Safe Beacons
- Corrosion Resistant
- Enclosure: GRP
- High Intensity Flash
- Clear Lens
- Contact for more information.
View Product
MEDC – Safe Area Xenon Beacons
- MEDC Safe Area Xenon Beacons
- Available in Weatherproof for Outdoor Areas – IP 65
- High Intensity Flash
- Enclosure: Corrosion Resistant GRP
- Optional Lens Guard
- Multi Lens & Enclosure Colours Available
- Contact for more information & design.
View Product
MEDC – Xenon Beacon
- MEDC High Output Xenon Beacons
- SM87HXB, XB11, XB12, XB15, XB4
- Designed for use in Hazardous Areas
- Enclosure: GRP, LM35 Aluminium, SS 316
- SIL 1, SIL 2 Beacons Available
- Various Lens Color, Enclosure, Flashing Rates & Outputs
- 5J, 10J, 15 & 21 Joule Beacons
- Custom tag & duty plates
- Beacon / Sounder Combination unit Available
- SS Screws
- Contact for more information.
View Product
Multiscan 8+
- Multiscan 8+ Gas Panel.
- Monitor up-to 16 Gas Detectors – Conventional & Addressable.
- 8 Conventional Gas Detector + 8 Addressable Gas Detector (RS485).
- Support for 4-20mA Analog Signals & RS-485 MODBUS.
- Event logging – For Alarm Monitoring & Signal Activation.
- Battery back-up – Ensure Gas Detection is on in case of power failure.
- Contact us for more information.
View Product
Multiscan++S2
- Crowcon Multiscan++S2 Gas Control Panel
- SIL 2 Certified for use in demanding areas.
- Monitor & manage up-to 256 Gas Detectors.
- Enclosure: ABS or Aluminium Rack
- Support for 16 / 32 / 64 / 128 / 256 Inputs.
- Support for 32 / 64 / 128 / 256 / 516 Outputs.
- Internal Self-Test to detect failures.
- Available in Panel & Rack Mount for use in custom racks.
- Galvanic isolated loops for hazardous area installation.
- Digital Communication between detectors.
- Explosion Proof Certified for use in Hazardous Areas.
- Built in event log & Status LED.
- Contact us for more information.
View Product
Oil Leak Detectors
- Fuel Oil Leak Detectors.
- Sensors can be used to identify oil leaks and fuel leaks.
- Passive leak detectors are mounted under the fuel tanks.
- Sensors have adjustable height for accurate identification.
- Surface mount or wall mount type brackets available.
- System is available with control panel and accessories.
- System can be seamlessly integrated into third party systems.
- Contact us for more information.
View Product
Oxygen Gas Detection
- Oxygen Gas Detection & Monitoring System (O2).
- Monitor oxygen levels in an environment with inert gas/nitrogen bottling.
- Increased Oxygen Levels can increase flammability of combustible matter.
- Decreased Oxygen Levels is dangerous and is harmful to health.
- Portable Gas Detectors with Oxygen Sensor to be used in confined spaces.
- Fixed Oxygen Gas Detectors to be used in industrial & hazardous settings.
- Detectors for Commercial & Industrial Areas with Relay Output for alarm.
- Gas Control Panel to monitor detector readings & drive alarm as required.
- Contact us for more information.
View Product
Petrol Leak Detection System
- Petrol Leak Detection System for use near Petrol Storage Tanks.
- Explosion Proof (ATEX) Rated Sensor for detection of Fuel Oils.
- Intrinsically safe for use in hazardous atmospheres.
- Sensor to be surface mounted on level platforms or leak sites.
- Sensor certified for Ex II 1 Ex ia T4 Ga for use in Zone 1 Areas.
- Control Panel / Controller available to monitor oil leaks & alarms.
- Optional sounder to be mounted for alarm & annunciation.
- Contact us for more information.
View Product
Portable Detector Calibration
- Portable Detector Calibration – Field Calibration.
- Annual Maintenance – 24×7 On Call Services.
- Monthly Gas Test / Bump Test – Safety Requirement.
- Full Certified Calibration at 6 Month Interval.
- On-site & Field Calibration Services – For Portable.
- Training & Operation for Field Portable Devices.
- Upgradation & Replacement of EOL (End of Life) Units at cost.
- Attested Calibration Reports & Monthly Gas Test / Bump Test report.
- Regular Updation of Maintenance Logs & device fit for use.
- Physical Inspection for Damage to Enclosure & Dust Ingress.
- Contact us for more information.
- For one time calibration see – Calibration Services
View Product
Portable Water Leak Detector
- Portable Water Leak Detector – Battery Powered.
- Kidde Water Leak & Freeze Detector for small facilities.
- Unit can be placed under sinks, toilets, fridges or heaters.
- Detects leaks or flooding and alerts the facility owner.
- Unit has a built-in buzzer for alerting local staff or owner.
- Detector can be interfaced to a local phone app via Wi-Fi.
- Mobile notification is sent via Wi-Fi for alerting and action.
- IP 65 Ingress Protection – Unit can be wiped and reused.
- Contact us for more information.
View Product
Probe Type Water Leak Sensor
- Probe Type Water Leak Sensor with Alarm Switch Relay.
- Can be used to detect presence or absence of water.
- Built-in LED Indicator with Green & Red LED Indication.
- Pre-wired 1.8m 5C cable for direct integration to system.
- Optional mounting holes for screwing unit in place.
- Enclosure: 304 Stainless Steel, highly corrosion proof.
- Ideal for use in AHU (Air Handling Units) & Drain Pans.
- Suitable for use in FCU (Fan Control Units) Drip Trays.
- Suitable for detection of condensate build-up in panels.
- Contact us for more information.
View Product
Refrigerant Gas Detectors
- Refrigerant Gas Detectors – Standalone Sensor Unit.
- Gas Detection for Industrial Refrigeration Systems.
- Detect Ammonia (R717), CO2 (R744), HCFC & HFCs.
- Detector capable to detect wide range of gases.
- Detector is suitable for fixed installation in field.
- LCD Display with real time gas readouts & alarm.
- Pre-configured Alarm Levels as per ASHRAE 15 2022.
- Detect R134a, R22, R410a & other refrigerant gases.
- Integrated Dry Contact Relay for Alarm & Signaling.
- Contact us for more information.
View Product
Refrigerant Leak Detection System
- Refrigerant Leak Detection System – Fixed Installation.
- Detection of refrigerant gases emanating from HVAC.
- Refrigerant Gas Detectors are to be installed near leaks.
- Suitable for use in chiller rooms & mechanical rooms.
- Refrigerant Detectors shall activate the leak extract fans.
- Activation to solenoid valves or alarm & visual signals.
- Signaling to chiller plant management & ventilation.
- Detect wide range of freons, HFCs, CFCs & NH3 gas.
- Optional integration to BMS or Fire Alarm System.
- Detection of a wide variety of refrigerant gases.
- Contact us for more information.
View Product
Refrigerant Leak Detector
- Refrigerant Leak Detector.
- Easily detect refrigerant leaks.
- Detectable Refrigerants – R-22, R134a, R-404A, R-410A, R-507, R438A, major CFCs, HFCs & HCFCs.
- Replaceable batteries for 16 hours continuous use.
- Highly sensitive to refrigerant gases.
- High/low sensitivity adjustment option.
- LED indicator and audible alarm for refrigerant leak.
- Automatic zeroing & rugged enclosure for long use.
- Contact us for more information.
View Product
Rotating Beacons
- Federal Signal Red Rotating Beacons.
- Rated for 24Vdc Power Supply.
- Integrated 1/2″ NPT Pipe & Surface Mount.
- Rated for indoor & outdoor use.
- IP66 Ingress Protection with Nema 4X Rated.
- IP69K Compliant – For Adverse Locations.
- Handle high pressure sprays & temperatures.
- QCD Approved for Fire Alarm System.
- Contact us for more information.
View Product
Sampling Gas Detector
- Crowcon Environmental Sampling Unit / Sampling Gas Detector.
- Low-cost Air Sampling Unit for HVAC & other critical Equipment.
- Detection of toxic / flammable gases in hot, humid or dusty environments.
- Single Point / Multi Point / Sequential / Aspirated Sample System.
- Low & High Alarms signals to program Relays for Shutdown / AV Units.
- Single Point – Gas Detector using Pellistor / IR Sensor for High Temps.
- Multi Point – Made of Multiple Point for Environmental Gas Monitoring.
- Engineered / Customized Solutions available certified for Hazardous Areas (with 1, 2 or 3 sensors) and Non-Hazardous Areas. Can be programmed for executive action based on detection from multiple detectors.
- Contact us for more information.
View Product
SMART 3G-C2
- SMART 3G-C2 Fixed Gas Detector
- Capable of detecting more than 50 types of Gases.
- Toxic, Flammable, Oxygen & Refrigerant Gases.
- Built-in Self Diagnosis for Fault Identification.
- SIL 2 Certified.
- ATEX Certified for use in Explosive Areas.
- IP 65 Rated with Aluminium Enclosure.
- Contact us for more information.
View Product
SMART 3G-D2
- SMART 3G-D2 Fixed Gas Detector.
- Can be used for flammable, toxic & refrigerant gases.
- SIL 2 Certified & ATEX Certified for use in Explosion Proof Areas.
- Non-intrusive Calibration using Magnetic keys.
- Capable of SIL 3 Certification with applicable system.
- Intrinsically Safe Version Available.
- IP 65 Ingress Protection.
- LCD Display, 5 Status LED & 4 Indicator LED.
- 4-20mA Analog Outputs & RS485 Addressable Output.
- Green LED Ring around Display for Alarm Status Indication.
- Contact us for more information.
View Product
SMART S-MS 3A
- SMART S-MS 3A Fixed Gas Detector.
- Can be used for Flammable & Toxic Gases.
- SIL 2 Approved.
- Redundant system ensures SIL 3 Certification.
- IP 65 Protection & Explosion Proof.
- Enclosure: Aluminium or SS
- 3 Relay Outputs for AL1, AL2 & Fault.
- Optional HART.
- Contact us for more information.
View Product
Smoke Detector Sensitivity Tester
- Smoke Detector Sensitivity Tester.
- Ensure detector is calibrated for specified levels.
- Measures detector sensitivity and feeds back info to user.
- Unit automatically self-calibrates prior to each testing use.
- Unit is battery Operated & suitable for most detectors.
- Requires specialized Smoke Aerosol (Aero 400) for testing.
- Requires a control unit with the user with main unit.
- Testing can be conducted in levels as desired by client.
- Ensure optimal performance of smoke detectors.
- TruTest 801 Smoke Detector Sensitivity Test Head.
- TruTest 800 Smoke Detector Sensitivity Test Kit (6m).
- AERO 400 TruTest Smoke Aerosol – Precision Testing.
- Contact us for more information.
View Product
Smoke Detector Tester
- Smoke Detector Tester in Qatar.
- Solo A5 – Aerosol Based for Manual Smoke Testing.
- Solo A10 – HFC-Free Manual Smoke Detector Tester.
- Solo A10S – HFC-Free Smoke Detector for Solo 330.
- Solo 330 – Hand-held dispenser to use with Solo A5 & A10S.
- Solo A7 – Detector Duster for Cleaning Detectors from residue.
- Ex-stock subject to prior sales.
View Product
Solo 100 Telescopic Access Poles
- Solo 100 Telescopic Access Poles.
- Extension from 1.26m to 4.5m (6m total).
- Made from strengthened durable fiberglass.
- Lightweight and portable tester poles.
- Non-conductive material for risk free use.
- “TotalLock” system ensures sections never lock.
- Increase Height using Solo 101 for max. height of 9m.
- Designed for Smoke Detectors placed at tall ceiling.
- Ex-stock – Same day delivery.
- Contact us for more information.
View Product
Solo 200 Detector Removal Tool
- Solo 200 Detector Removal Tool.
- Universal Detector Removal Tool.
- Remove Smoke & Heat Detectors with ease.
- Ideal for removal of most types of detectors.
- Enables removal & replacement of detectors.
- Adjustable for different sizes of detectors.
- Color coded for different sizes of detectors.
- Universal joint so tool never bends when in use.
- Ex-stock – Same day delivery.
- Contact us for more information.
View Product
Sale!
Solo 330 Aerosol Smoke & CO Dispenser
- Solo 330 Aerosol Smoke & CO Dispenser.
- QCD Approved for use with all detectors.
- Quick & strong for aerosol delivery.
- Transparent cup to view detector LED.
- Use at variety of heights and angles.
- Suitable for detectors up-to 177mm in diameter.
- Height adjusting accessories & poles.
- Ex-stock – Same day delivery.
- Contact us for more information.
View Product
Solo 365 Smoke Detector Tester
- Solo 365 Smoke Detector Tester
- ‘Auto-start’ proximity sensor – faster testing, less smoke waste
- Auto-LED torch – allows simple testing of detectors in dark areas
- Slim-line design – easier access to detectors in confined spaces
- Clearing mode – eliminates re-alarms, increasing productivity
- Delayed start mode – for non-standard detectors and ASD systems
- Included – 1 x Solo 365 Head Unit, 1 x Solo 370 Lithium-Ion Battery Pack, 1 x Solo 371 Smoke Generator, 1 x Solo ES3 Smoke Cartridge, 1 x Spare 1060 Charger & USB Lead
- Additional Accessories Available – Multi Height Testers.
- Contact us for more information.
View Product
Solo 461 Cordless Heat Detector Tester
- Solo 461 Wireless Heat Detector Tester.
- Industry-standard for testing heat detector.
- Battery-powered c/w charger.
- Immediate & fast activation.
- Can be used for Fixed Temperature Heat Detector.
- Can be used for Rate-of-rise Heat Detector.
- Can be used for Multi-sensor or Combination Detector,
- Two separate battery batons for continued use.
- Ex-stock – Same day delivery.
- Contact us for more information.
View Product
Sale!
Solo 461 Heat Detector Tester Kit
- Solo 461 Heat Detector Tester Kit.
- Battery powered heat detector tester kit.
- Can be connected to Solo Access poles to reach up-to 9 metres.
- Heat is focused directly into the detector sensor for fast testing.
- Can trigger majority of spot & point heat detectors into alarm.
- Powered by battery baton fitted within the pole for cordless use.
- Transparent cup for clear view of detector LED & activation.
- Automatically goes into standby after 120s for protection.
- Switches off completely after 5 minutes in standby.
- Provided with 1x battery baton and 240V fast charger.
- 3000mAh battery ensures longer testing per charge.
- Ex-stock – Same day delivery.
- Contact us for more information.
View Product
Sale!
Solo A3 Smoke Detector Test Gas
- Solo A3 Smoke Detector Test Can.
- Hand-held Test Gas Can – Fast Results.
- Delivers Smoke to Detector immediately.
- Standard Product to Test Smoke Detectors.
- UL Certified for use with Fire Alarm Testing.
- Contact us for more information.
Solo A3 is obsolete as of 2016, kindly use Solo A5.

Solo A5 Smoke Detector Tester
View Product
Sale!
Solo A5 Smoke Detector Tester
- Solo A5 Smoke Detector Tester – Aerosol Type.
- For use with Solo 330/332 Dispensers.
- Manufacturer approved tester for use with smoke detectors.
- Flammable – should be stored under room temperature.
- Non-toxic & Silicone-free to prevent detector contamination.
- 250ml Volume Capacity – For use with 330 Dispensers.
- Ex-stock with same day delivery.
- Contact us for more information.
View Product
Sale!
Solo A7 Detector Duster
- Solo A7 Detector Duster.
- Pressure can to clean contaminated detectors.
- Prevents false alarm & for fire alarm maintenance.
- Removes most dust and dirt from detector chamber.
- Volume: 250ml of Clean Gas Canister.
- Non-flammable & simple to use.
- Ex-stock – Same day delivery.
- Contact us for more information.
View Product
Solo ES3 Smoke Catridges
- Solo ES3 Smoke Cartridges.
- Detector capable Smoke for Wide Range of Detectors.
- Non-flammable, non-pressurized & non-hazardous.
- Instant detector activation.
- Compact design.
- Ex-stock with same-day delivery.
- Contact us for more information.
View Product
Solo Fire Alarm Test Kits
- Solo Fire Alarm Test Kits – Complete Equipment Package.
- Solo 808 – Smoke Tester & Access Pole (4m).
- Solo 809 – Smoke Tester & Access Pole (6m).
- Solo 810 – Smoke Tester & Extension Pole (2.5m).
- Solo 811 – Smoke Tester, Access Pole (6m), Removal Tool & Bag.
- Solo 812 – Smoke Tester, Access Pole (8.2m), Removal Tool & Bag.
- Solo 822 – Smoke Tester, Heat Tester, Access Pole (6m), Removal Tool & Bag.
- Solo 823, Smoke Tester, Heat Tester Access Pole (9.3m), Removal Tool & Bag.
View Product
Solo Smoke and Heat Detector Tester and Removal Kit
- Solo Smoke and Heat Detector Tester and Removal Kit.
- Extension Pole can reach up-to 6m in height (4.5m).
- Combined Travel Kit c/w Bag for Easy Use.
Kit includes:
- 1x Solo 330 – Aerosol Dispenser (Insert Solo A5)
- 1x Solo A5 – Smoke Aerosol Canister (250ml)
- 1x Solo 461 – Cordless Heat Detector Tester.
- 1x Solo 100 – 4.5m Telescopic Access Poles.
- 1x Solo 200 – Detector Removal Tool.
- 1x Solo 610 – Protective Storage Bag.
View Product
Standalone HSSD Systems
- Standalone HSSD Systems for use with Fire Alarm Systems.
- High Sensitivity Smoke Detection for indoor applications.
- Compact units for use in small rooms & electrical cabinets.
- Single sampling pipe up-to 50m in length (still air use case).
- Standard LED indicator for Fire, Fault & Normal status.
- Standard 2 Relay Contacts – Alarm & Fault for Fire Panel.
- Optional relay & input card for input & output expansions.
- QCD approved for use & integration with fire alarm systems.
- Contact us for more information.
View Product
T4 – Portable Gas Detector
- Crowcon T4 – Multi Gas Portable Detector
- Can be used to detect CO, H2S, Flammable & Oxygen.
- Intuitive Menu System & Large Buttons.
- Detection of most common gas hazards in enclosed spaces.
- IP 65 & IP 67 rated – to prevent dust & water ingress.
- 18 Hour Battery – For Prolonged Use.
- Ensure regular bump test & calibration.
- Contact us for more information.
View Product
Toxic Gas Detection
- Toxic Gas Detection System & Early Detection.
- Detect highly toxic & corrosive gases in confined spaces & industrial environments – Indoors & Outdoors.
- Detect gases like Ammonia (NH3), Carbon Monoxide (CO), Hydrogen Fluoride (HF), Hydrogen Sulphide (H2S), Chlorine (Cl2), Ozone (O3) & Sulphur Dioxide (SO2) with industry approved safety level signaling.
- Corrosion proof & IP66/67 enclosures required to prevent deterioration of detectors exposed to toxic gases for long duration.
- Explosion Proof Gas Detectors for Zone 2, 1 & Zone 0 hazardous area.
- System in line with latest QCD, local & International Compliance.
- Enclosures available in GRP, Marine grade Aluminium & 316 SS.
- Poison resistant sensors available to reduce sensor life deterioration.
- Sampling Gas Detectors for odour control units in sewage plants.
- List of detectable toxic gases provided as per site risk assessment.
- Contact us for more information.
View Product
TXgard Plus – Flameproof Detector
- TXgard Plus – Flameproof Toxic & Oxygen Gas Detector
- Local LCD Display for menu & magnetic key operation.
- Explosion Proof – ATEX Certified for use in Hazardous Areas.
- Non-Intrusive Calibration with custom Magnetic Key.
- Added Fault & Alarm Relays – For Signaling & Alarm.
- IP65 Protection for use in outdoors – dust & water.
- Contact us for more information.
View Product
UV/IR Flame Detectors
- UV/IR Flame Detectors – Ultraviolet / Infrared.
- Available for Safe Area & Explosion Proof Area.
- QCD (Qatar Civil Defense) Approved for Fire Alarm.
- Enclosure Options: Aluminium, Alloy, Stainless Steel.
- FOV & Range: 100° Coverage Angle & 30m Coverage.
- Operating Voltage: 24Vdc (17Vdc to 32 Vdc).
- Relay Outputs for Fire, Fault & Warning Alarm.
- 4-20mA Analog Signal Output / Conventional.
- Mounting Brackets, Air Shield & Sun Shield.
- Contact us for more information with requirements.
View Product
Vesda Xtralis
- Vesda Xtralis – Aspirating Smoke Detector.
- Vesda-E VES has four programmable alarms.
- Available in Single Pipe or Four Pipe Options.
- Sector addressing based on sectors & zones with tagging.
- Flair Detection technology delivers reliable early warning.
- Multi-stage filtration & optical protection with clean air.
- ASD & HSSD coming with LCD Display and non-LCD.
- Available Variants: Vesda-E VEA, Vesda-E VEP, Vesda-E VEU, VSP, VLP, VLS, VLC & VLF Filter, Vesda VRT-200, LaserSCANNER, Vesda LaserCOMPACT Marine, Vesda Sensepoint XCL, Vesda LaserCOMPACT Explosion Proof, Vesda Xtralis VLI LaserINDUSTRIAL Detector, Vesda-E VPS, Vesda VLF-250 LaserFOCUS, Vesda VLS-304 LaserSCANNER, Vesda Xtralis Power Supply Unit, Clips, Pipes, Test Points & Other Field Accessories.
- Available Tubes, Clamps, Pipes, Filters, Power Supply & Accessories.
- Contact us for more information.
View Product
Vortex – Gas Control Panel
- Crowcon Vortex – Gas Control Panel.
- Capable up-to 12 Oxygen, Toxic or Flammable Gas Detectors with (including 3 for Fire).
- Each detector assigned 1 Fault Level & 3 Alarm Levels to trigger up-to 32 output relays.
- Push buttons and LED Display enable easy operation – Real Time Gas Readings of Detectors.
- Can be integrated with Manual Call Points & Other Safety Systems – Support for Fire Loops.
- SIL 1 Certified – for use with Safety Instrumented Systems – Functional Safety & Integrity.
- Battery Backup & MODBUS, RS-485 Integration – For BMS & Scada Integration – Networking.
- Available in Wall Mount, 19″ Rack mount, Panel Mount – For all site requirements & design.
- Custom design based for site approved design – for client’s custom PLC Board & Equipment.
- Contact us for more information.
View Product
Vortex FP – Flameproof Gas Panel
- Crowcon Vortex FP – Flameproof Gas Panel
- Used in Hazardous areas – both onshore & offshore
- Flameproof Gas Detector Control Panel
- Made with LM25 Aluminium with polyester powder coating.
- Support for up-to 12 Gas Detector (including 3 loops for fire – up-to 20 devices per loop)
- Capable of up-to 32 relay outputs.
- RS-485 MODBUS or PROFIBUS
- Store up-to 300 alarm, power, fault, system events.
- ATEX Certified – for use in Explosion Proof Areas
- Available in FP or FP Compact
- Contact us for configuration & consult.
View Product
Vortex FP Compact – Flameproof Gas Panel
- Crowcon Vortex FP Compact – Flameproof Gas Panel
- Used in Hazardous areas – both onshore & offshore.
- Flameproof Gas Detector Control Panel.
- Made with LM25 Aluminium with polyester powder coating.
- Support for up-to 12 Gas Detector (including 3 loops for fire – up-to 20 devices per loop)
- Capable of up-to 16 relay outputs – For Signaling, Fire Panel & PLC Integration.
- RS-485 MODBUS or PROFIBUS – For BMS & SCADA Integration – Networking.
- Event Logger – Store up-to 300 alarm, power, fault, system events.
- Explosion Proof – ATEX Certified for use in hazardous areas.
- Available in FP or FP Compact – Different Sizes & Designs.
- Contact us for configuration & consult.
View Product
Water Detection System
- Water Detection System – For Data Center & Pump Rooms.
- Customized leak sensing cable for large area coverage.
- Probe type sensors for leak detection in sump pits & outdoors.
- Relay Outputs Available – For Executive Action & Signaling.
- From small systems (3m cable) to large (3000m) systems.
- Outputs: BMS, BACnet, PLC, SCADA & Integration Features.
- Wireless Water Leak Detection System for existing facility.
- Detects Water Ingress & Initiates Signaling – Linear Wire.
- To be used in Areas with Sensitive Electrical Equipment.
- Server Rooms, Battery Rooms, Switchgear & Storage Areas.
- Contact us for more information.
View Product
Water Leak Detector
- Water Leak Detector – Leak Sensing Cable for Large Areas.
- Used to detect leaks in chilled water lines or drip pans.
- Probe type sensors are used to detect leaks in FCU unit.
- Comprehensive detection of water leak for every facility.
- From small standalone systems to highly networked solutions.
- Distance read type systems for pin-pointing location of leak.
- Early detection of water leak in critical facilities is recommended.
- Systems have outputs for BMS, BACnet, SMTP & relay outputs.
- Contact us today for more information.
View Product
Wireless Control Systems
- Wireless Control Systems – For Existing Facilities.
- Facility Monitoring Systems are ideal for cable free installation.
- Wireless Control systems for commercial & industrial use cases.
- Systems involve a transmitter with each unit and a receiver.
- Receiver shall have an antenna to interface every transmitter.
- Wireless transmitters have a battery life of over 10 years.
- Wireless temperature sensors & monitoring systems.
- Wireless temperature & humidity sensors & monitoring.
- Wireless Water Leak Detection System – Linear Cable Type.
- Wireless Water Leak Detection System – Probe / Point Type.
- Wireless Transmitter – Receives wired NO or NC digital input.
- Wireless Transmitter – Receives Analog 4-20mA Analog input.
- Wireless Gas Detection System – For Indoors & Outdoors.
- Wireless Systems can be of Wi-Fi type or Radio Frequency Type.
- Receiver Systems can integrate into BMS via Modbus or BACnet.
- Custom mapping features display status of wireless transmitters.
- Wireless Systems can be used to fine tune your facility management.
- Contact us for more information.
View Product
XgardIQ – SIL 2 Gas Detector
- XgardIQ – Fixed Addressable Gas Detector.
- Used to detect flammable, toxic, oxygen or High Temperature H2S.
- Infrared Sensors Available for Accurate Flammable Gas Detection.
- IP 66 Ingress Protection – To prevent Water & Dust Ingress.
- Remote Sensor Assembly Kits Available for Remote Sensor Placement.
- Explosion Proof – ATEX Certified for use in Hazardous Areas.
- SIL 2 Certified – For Performance & Equipment Integrity with DCS.
- Local OLED Display – Clear & Bright Readings even in sunlight.
- Enclosure: 316 SS – Corrosion Proof & Rust Proof in salty atmospheres.
- Output: 4-20mA Signals & RS-485 MODBUS RTU – Analog & Digital.
- Non-intrusive Calibration – Button Controls for quick and easy use.
- Hot Swappable Sensors – Does not require Hot Work Permit.
- LED Indicators for Detector Status, Fault & Power Indication.
- Event logger – To measure continuous gas monitoring.
- Contact us for more information.
View Product
Xsafe Fixed Gas Detector
- Crowcon Xgard Fixed Gas Detector
- Xsafe – 1kg
- ATEX Certified Fixed Gas Detector
- Low-cost reliable Gas Detector
- Aluminium Enclosure.
- Ability to detect several ranges of flammable gases.
- Hydrogen, LPG, Methane, Ammonia & Other Organics.
- 4-20mA Analog Signals – PLC & Plant Integration.
- Contact us for more information.
View Product

QUICK LINKS

contact us

location

C Ring ROAD,

doha-qatar