Conventional Systems

Conventional System – Gas Detector & Conventional Panel – Individually Wired & Signaling – Support for Limited Detectors – Conventional SIL 2 Systems & Explosion Proof Equipment

Showing all 59 results

Ammonia (NH3) Gas Detector
- NH3 Detector
- Low voltage 12-24 Vac/Vdc Monitor
- Three separate relays for three alarm levels
- LED Display shows Active Gas Concentration
- Available in PPM Alarm Options
- Technician Adjustable Settings & Options
- Built-in buzzer
- Made in USA
View Product
Analogue Linear Heat Detector
- Linear Heat Detector Cables.
- Resettable linear heat detector cable – for solar applications.
- To be used with Linear Heat Detector Control Unit & EOL.
- Can be used in areas that require regular Heat sensing & Detection System.
- Cables can be reset once normal temperature is realized – Equipment safety.
- Can be used to measure temperature in critical equipment.
- System can be used to switch on passive cooling / fans to prevent overheating.
- Cable Don’t Need to be Replaced After Detection – Cables will normalize.
- Contact us for more information.
View Product
Apollo Fire Alarm System
- Apollo Fire Alarm System
- Supply – Orbis, Discovery, XP95, Series65, Series65A & Xpander
- Smoke Detectors, Heat Detectors & Manual Call Point – Conventional
- Smoke Detectors, Heat Detectors & Manual Call Point – Addressable
- Smoke Detectors, Heat Detectors & MCP – Addressable – SIL 2
- SIL 2 Devices for use in Hazardous Areas & Explosive Atmospheres
- QCD Approved.
View Product
Apollo Orbis Conventional Detectors
- Apollo Orbis Conventional Detectors – Fire Alarm Devices.
- Orbis Conventional – For Safe Area & Commercial spaces.
- Orbis Marine – For use in boats, ships & offshore vessels.
- Orbis Intrinsically Safe – Hazardous classified areas (ATEX).
- Apollo Orbis Detector Series: ORB-HT, ORB-OP & ORB-OH.
- For direct integration into conventional fire alarm system.
- Intrinsically safe devices to be used with galvanic isolator.
- Smoke Detector, Heat Detector & Multi-sensor detector.
- Optional mounting kits for easy, fast & direct installation.
- Optional relay bases available with dry contacts for alarm.
- Suitable for use in offshore, evacuation shelters & spaces.
- Industry standard for fire alarm with global approvals.
- QCD Approved for integration to fire alarm systems.
- Contact us for more information.
View Product
Calibration Gas Cylinder & Regulator
- Specialty Mixed Calibration Gas
- Included Regulator & PVC Hose
- Additional Accessories / Calibration Equipment
- Included Analytical Certificate with Calibration Cylinder.
- Regulator 0.5L/min or 1L/min – Brass for Flammable Gas & SS for H2S.
- Different Gas Mix Available – Flammable, Oxygen & Toxic.
- Contact us for more information.
View Product
Calibration Services
Crowngas Offers Certified On-Site Calibration Services for all Fixed & Portable Gas Detectors for client convenience and to ensure equipment is calibrated in the ideal environment.
- Calibration Services for Gas Detectors – Both Fixed & Portables Detectors.
- Calibration to be done every 6 Months (180 days) by Certified Professional.
- Prolongs sensor life, functionality and equipment integrity for field use.
- Recalibrates & recorrects sensor jump & drift – Analog & Digital Sensors.
- Ensures optimal functioning of the system – Alarm & Relay Activation.
- Increases Theoretical Sensor Life based on Proper Maintenance & use.
- Contact us for more information.
- For Portable Gas Detector Calibration – Portable Detector Calibration
- For Fixed Gas Detector Calibration – Gas Detector Calibration
View Product
Carbondioxde (CO2) Gas Detector
- Carbondioxide (CO2) Fixed Gas Detector.
- Low voltage 12-24 Vac/Vdc Monitor.
- Three separate relays for three alarm levels.
- LED Display shows Active Gas Concentration.
- Available in PPM and %VOL Alarm Options.
- Technician Adjustable Settings & Options.
- Built-in buzzer – For Alarm Signaling & Alert.
- Contact us for more information.
View Product
Carbonmonoxide (CO) Detector – QCD Approved
- Carbon monoxide CO Gas Detector.
- For use in kitchens & indoors – Safe Area Installation.
- Local Alarm Buzzer & Relay Output – Alarm & Trouble.
- LED Status Indicator – Red, Amber & Green LED’s.
- Integrate directly into the Fire Alarm System.
- QCD Approved – For use with Fire Alarm Panel.
- Contact us for more information.
View Product
Conventional Control Panel (12)
- Macurco Conventional Gas Control Panel
- Supports 12 4-20mA Analog Connections
- 3x Zones
- 3x 10A Relays
- 2X 24Vdc Output
- Contact for more information.
View Product
Crowcon Gasmaster 4 Channel Gas Control Panel
- Crowcon Gasmaster 4 Channel Gas Control Panel.
- Capable up-to 4 Oxygen, Toxic or Flammable Gas Detectors.
- Each detector assigned 2 levels of independent alarm.
- Push buttons and LED Display enable easy operation.
- Functional Certification & Capable – SIL 2 Certified.
- RS-485 MODBUS communication for DCS/PLC/SCADA.
- Battery Backup – For operation in case of power failure.
- Fire Alarm Control Panel Integration & Networking.
- Event Logger – To Measure, Fire, Gas & Fault Alarms.
- Contact us for more information.
View Product
Crowcon Gasmonitor Plus
- Crowcon Gasmonitor Plus – Rack Mount Gas Detection Panel.
- Modular System Cards for Fire & Gas Detection System.
- Systems can be integrated into custom rack mount panel 3U.
- Integrate 4-20mA Toxic, Flammable & Oxygen Gas Detectors.
- Relay output with configuration as required for A/V & Outputs.
- Customized voting parameters for flexible output control signals.
- Integrate up-to 20 conventional smoke & heat detectors directly.
- Integrate up-to 16 gas detectors per rack / interchangeable for fire.
- 4-20mA Analogue Outputs or 24Vdc Audio Visual Alarm Drive unit.
- Power: 240Vac 60Hz with battery or Optional 24Vdc powered unit.
- Suitable for use in shelter, refuge centers or rack mount applications.
- Systems are highly scalable, modular and flexible based on demand.
- SIL 2 Approved for highly demanding safety & failure free operation.
- Contact us for more information.
View Product
Crowcon IRmax Infra-Red Gas Detector
- Crowcon IRmax Infrared Flammable Fixed Gas Detector
- Wall Mounting & Pipe Mounting with Suitable Accessories.
- 4-20mA Analog Output for Integration with Control System.
- Optional – HART & RS-485 MODBUS for Addressable System.
- SIL 2 Rated for Process & Functional Safety Equipment’s.
- ATEX Certified for use in Explosive Atmospheres & Offshore.
- Enclosure: Stainless Steel 316 c/w Optional Display.
- Contact us for more information.
View Product
Crowcon TXgard-IS+ Toxic & Oxygen Gas Detector
- Crowcon TXgard-IS+ Toxic & Oxygen Gas Detector.
- Intrinsically Safe Fixed Gas Detector (with Isolator)
- Local LCD Display – Clear Display with menu options.
- Used to detect Toxic Gases & Oxygen Levels.
- Explosion Proof (ATEX) Certified for Zone 0 areas.
- Capable of Detecting H2S, NH3, O2 & Toxic Gases.
- 4-20mA Signal – For Analog Signal to PLC or BMS.
- Calibration to be performed manually on field.
- Can be used as sampling detector with flow adaptor.
- Strong, sturdy carbon loaded nylon enclosure with IP65.
- Contact us for more information.
View Product
Crowcon Xgard Bright
- Xgard Bright – Flammable, toxic gas & oxygen monitoring.
- Available in ADC12 Aluminium Alloy Enclosure Material.
- IP65 Protection for use in Outdoors (Optional IP66)
- Addressable Gas Detector for large area networks.
- Clear OLED Display for use in sunlit / bright areas.
- Magnetic non-intrusive calibration with key.
- ATEX Certified for use in hazardous areas.
- Built in Relays – Alarm 1, Alarm 2 & Fault.
- Certified for use in Zone 1 & Zone 2 Areas.
- Contact us for more information.
View Product
Crowcon Xgard Fixed Gas Detector
- Crowcon Xgard Fixed Gas Detector
- Xgard Type 1 – Nylon: 0.5kg / Alloy: 1kg / 316 SS: 3.1kg
- Xgard Type 2 – Aluminium: 1kg / Stainless steel: 3.1kg
- Xgard Type 3 – Aluminium: 1kg / Stainless steel: 3.1kg
- Xgard Type 4 – Aluminium: 1.5kg
- Xgard Type 5 – Aluminium: 1kg / Stainless steel: 3.1kg
- Xgard Type 6 – Aluminium: 1kg / Stainless steel: 3.1kg
- Explosion Proof – ATEX Certified Fixed Gas Detector
- Low-cost reliable Gas Detector – In Battery Rooms.
- Available in Nylon GRP, Aluminium or SS 316.
- Ability to detect several ranges of flammable gases, toxic & oxygen.
- 4-20mA Analog Signals – Direct PLC & Plant Integration.
- Requires half-yearly calibration and system testing.
- QatarEnergy Approved for use in Gas Detection System.
- Contact us for more information.
View Product
Crowcon Xgard Type 1 Intrinsically Safe Fixed Gas Detector
- Crowcon Xgard Type 1 Fixed Gas Detectors.
- Fixed Point Ex ia Intrinsically Safe Toxic & Oxygen Detectors.
- Uses an electrochemical sensor to provide 2-wire 4/20mA Output.
- Operating temperature between -40°C to +50°C & humid spaces.
- Xgard Type 1 has standard GRP Enclosure – Glass Reinforced Nylon.
- GRP Polymers are chemically resistant & cost effective for wide use.
- Optional Accessories include spray deflector, flow adaptor & W/P caps.
- Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
- Offering Calibration, Sensor & Component Spares, Replacement.
- Contact us for more information.
View Product
Crowcon Xgard Type 2 Flameproof Toxic & Oxygen Detector
- Crowcon Xgard Type 2 Flameproof Fixed Gas Detectors.
- Type 2 Exd Flameproof Toxic & Oxygen Detectors.
- Uses an electrochemical / pellistor sensor for gas detection.
- Operating temperature between -40°C to +50°C & humid spaces.
- Xgard Type 2 has standard Aluminium Enclosure – Rigid & Strong.
- Aluminium enclosures are highly durable with tough polyester coat.
- Accessories available for duct mounting & sampling applications.
- Optional Accessories include spray deflector, flow adaptor & W/P caps.
- Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
- Offering Calibration, Sensor & Component Spares, Replacement.
- Contact us for more information.
View Product
Crowcon Xgard Type 3 Flammable Gas Detector
- Crowcon Xgard Type 3 Fixed Gas Detectors.
- Exde Flameproof Flammable Explosion Proof Gas Detectors.
- Uses poison resistant 3-wire pellistor sensor for flammable gas.
- Operating temperature -40 to +80°C & humid conditions installation.
- Optional Accessory Enclosure required for connection – For easy zero/cal.
- Aluminium Enclosure with Polymer coating as standard – ATEX Certified.
- Optional Accessories include spray deflector, flow adaptor & W/P caps.
- Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
- Offering Calibration, Sensor & Component Spares, Replacement.
- Contact us for more information.
View Product
Engineered Rack System (13+)
- Crowcon Gas Control Panel
- Custom PLC based Engineered Rack Systems
- Can support 13 or more Detectors (Flexible) – Conventional System
- Push Buttons & LED Display reading for each detector
- MODBUS Compatible
- SIL-1 Certified
- Battery Backup / UPS
- Available in Panel Mount / Wall Mount / Custom Rack Solutions
View Product
Engineering – Installation – Commissioning
Crowngas Detection System offers End to End Solutions for Engineering, Installation & Commissioning for Fixed Gas Detection Systems. Installation and works include certified & optimal detector placements for easy access, engineering documentation preparation, maintenance & calibration while being in-line with industry standards and practices for gas detection systems.
- We offer complementary site support & assistance for clients to carry out installation with their resources – As-built Drawings for quick installation.
- Our design practices are in compliance with Shell DEP 32.30.20.11 Performance Standards & QatarEnergy Philosophy for Fire and Safety.
- Contact us for more information.
View Product
Explosion Proof Break Glass Manual Call Point
- Explosion Proof Break Glass MCP – Manual Call Point.
- Conventional Type Break Glass MCP for Hazardous Areas.
- MCP used to raise alarm during fire, gas release or doors.
- Enclosure: UV Resistant Glass Reinforced Polyester (GRP).
- IP Rating: IP66 / IP67 Weatherproof and dust resistant.
- Color: Red (standard), black, blue or as per choice/demand.
- Optional: Red LED to indicate activation/operation/testing.
- Lift flap and corrosion resistant models with custom labels.
- SIL 2 Certification for Functional Integrity of Fire Alarm System.
- QCD Approved – Qatar Civil Defense approved models available.
- Contact us for more information.
View Product
Explosion Proof Flame Detector
- Explosion Proof Flame Detector.
- Flame Detecting Principle: UV/IR.
- Enclosure: Metallic Type, Aluminium 6061.
- FOV & Range: 100° Coverage Angle & 30m.
- Operating Voltage: 24Vdc (17Vdc to 32 Vdc).
- Relay Outputs for Fire, Fault & Warning Alarm.
- 4-20mA Analog Signal Output / Conventional.
- QCDD Approved for Fire Panel Integration.
- Aluminium Mounting Bracket for 360° installation.
- Optional: Sun shield & Air shield Accessories.
- Contact us for more information.
Flame Detector is suitable for Woqod LPG Storage Tank Flame Detection in Outdoor Area’s with several installation across Qatar. Contact us for more information & technical support.
View Product
Explosion Proof Heat Detector
- Explosion Proof Heat Detector.
- Rated Compensated Heat Detector Elements.
- MEDC HD1 Heat Detector Range – For Hazardous Areas.
- E2S D1xH1, D2xH1, GNExH1, STExH1 Heat Detectors.
- ATEX & IECEx – Explosion Proof Certifications Available.
- Optional red led indicator for heat detector activation signal.
- Temperature Options: Range 60°C – 385°C with optional guard.
- Enclosure: Marine Grade LM6 Aluminium, GRP or 316L SS.
- IP66/67 Ingress Protection with corrosion proof junction box.
- Enclosure Color: Red or Grey (Custom Colors available on demand).
- Multi-angle wall or ceiling bracket available for mounting.
- Optional Integration with wide range of addressable module.
- Certified for use in extremely harsh and hazardous environments.
- Optional EOL Module or Series Module with resistor/diode/zener.
- Entry Ports: M20, 1/2″ NPT, 3/4″ NPT entries based on mounting.
- Operating Temperature: -50° to +105°C for use in extreme temperature.
- Contact us for more information.
View Product
Explosion Proof Pull Stations
- Explosion Proof Pull Stations – Pull Handle Type.
- Conventional Type Pull Station Call Point for Hazardous Areas.
- Ideal for use in extreme weather and corrosive environments.
- Pull Station available in two types – lift & pull or push & pull.
- IP Rating: NEMA Type 4X & IP66/67 Weatherproof Protection.
- Color: Standard Red, Optional Blue, Yellow or Custom Colors.
- Enclosure: Cast Aluminium or Glass Reinforced Polyester (GRP).
- SIL 2 Compliant to maintain functional integrity of fire alarm system.
- Entries: 3/4″ NPT, 1/2″ NPT or Standard M20 Entries with Adaptors.
- Custom Labels, tags & equipment tags in stainless steel plates.
- Optional Accessories: Pole Mount Bracket Kit or Sunshade Kits.
- QCD Approved – Qatar Civil Defense approved models available.
- Contact us for more information.
View Product
Explosion Proof Smoke Detector
- Explosion Proof Smoke Detector.
- Photoelectric Type Smoke Detector for use in Hazardous Area.
- ATEX & IECEx – Explosion Proof Certifications Available.
- Built-in red led indicator is activated in the presence of smoke.
- Built-in 4-20mA Analog Signal Output for PLC / DCS / Scada.
- Built-in Relays for Smoke Alarm, Fault Alarm & Auxiliary Output.
- IP44 Ingress Protection – Suitable for Indoor / Humid / Moisture.
- Sensor module is intrinsically safe (I.S) & hot-swappable in field.
- Enclosure: ABS Plastic Smoke Detector in Aluminium Junction Box.
- Entry Ports: Standard 3/4″ NPT or M25 with 1/2/3/4 Port Configuration.
- Operating Temperature: -20°C to +65°C for use in extreme temperature.
- Optional Duct Mount Kit and Parts for Smoke Detection in HVAC Ducts.
- Contact us for more information.
View Product
Flamgard Plus – Flammable Gas Detector
- Flamgard Plus – Flammable Gas Detector.
- For Hydrocarbon, Hydrogen, Petrol & Vapor Detection.
- Non-Intrusive Calibration – No hot work permits required.
- Added Fault & Alarm Relays.
- IP65 Protection for use in outdoors.
- Contact us for more information.
View Product
Gas Detector Calibration
- Gas Detector Calibration – Field Calibration.
- Annual Maintenance – 24×7 On Call Services.
- Quarterly Bump Testing & Gas Detector Test.
- On-site & Field Calibration Services.
- Half Yearly Comprehensive Calibration & Maintenance.
- Training & Operation – For End User & Safety Personnel.
- Upgradation & Replacement of EOL (End of Life) Units at cost.
- Attested Calibration Reports & Factory Acceptance.
- Authorized Calibration & After-market service provider.
- Support for Major Gas Detectors in Market.
- Testing using certified calibration gas.
- Contact us for more information.
- For one time calibration see – Calibration Services
- For Portable Gas Detection AMC Services see – AMC for Portable Detectors
View Product
Gas Sampling System
- Crowcon Air Aspirated Sample Systems/ Gas Sampling System.
- Only Sampling System usable in Hazardous Area based on installation.
- Uses eductor for sampling (using Venturi Effect) – The eductor is driven by compressed air to create a negative pressure to draw the sample.
- Electrical Components are the sensor and Intrinsically Safe flow device.
- Principle: The air aspirated system uses a compressed air driven vacuum generator to draw a gas sample from a single point. Explosion proof gas detectors are fitted to monitor for flammable gases & toxic gases.
- Flow rate is limited to 1m/sec – Can be adjusted as per request & approved design with factory approvals.
- Certified for use in Zone 1 or Zone 2 hazardous areas, IP-65 Rated.
- Customized Engineered Solutions & Support from Factory for Design.
- Contact us for more information.
View Product
Gasflag – Single Detector Controller
- Crowcon Gasflag – Single Channel Monitor.
- Capable of monitoring one 4-20mA flammable, toxic or oxygen gas detector.
- Can be used in LPG Monitoring or locations with 1 Gas Detector.
- 3 Relay Outputs – For Alarm 1, Alarm 2 & Fault Relay Activation.
- Rising & Falling Alarm Setpoints for Oxygen Detectors.
- Two Rising Alarms for Flammable & Toxic Detectors.
- Can be used for any 4-20mA Analog Gas Detector.
- IP-20 Protection – Basic Protection from Dust.
- Contact us for more information.
View Product
Gasmaster – Gas Control Panel
- Crowcon Gasmaster – 1-4 Channel Control Panel.
- Capable up-to 4 Oxygen or Toxic Gas Detectors.
- Each detector assigned 2 levels of independent alarm.
- Push buttons and LED Display enable easy operation.
- Functional Certification & Capable – SIL 2 Certified.
- Battery Backup – For operation in case of power failure.
- Fire Alarm Control Panel Integration & Networking.
- RS-485 MODBUS RTU – Network & BMS Integration.
- Event Logger – To Measure, Fire, Gas & Fault Alarms.
- Contact us for more information.
View Product
GECA Gas Detector
- GECA Fixed Gas Detector – For LPG & Flammable Gases / Fumes
- Approved for Installation in LPG Gas Piped Areas
- Commercial Gas Detector with Controls & Indicators
- Contact us for more information.
View Product
Greystone CERMC Series – Indoor Carbon Dioxide Detector
- Greystone CERMC – Indoor Carbon Dioxide Transmitter
- NDIR Sensor for Long Life CO2 Readings
- 4-20mA Analog Output, MODBUS Outputs & Relay Outputs
- Optional Temperature Sensor
- Contact us for more information.
View Product
Greystone CMD5B1 – Carbon Monoxide (CO) Detector
- Greystone CMD5B1000 & Other – CO Detector
- 0-300ppm CO Range – For use in Carparks
- Analog 4-20mA Output or MODBUS
- AC or DC Power Options.
- Inbuilt relay for low powered device activation.
- Easy and quick calibration.
- Contact us for more information.
View Product
Greystone CMD5B5 Series – Duct Carbon Monoxide Detector
- Greystone CMD5B5 Series – Duct Carbon Monoxide Detector
- Analog 4-20mA Output or BACnet & MODBUS Output
- AC or DC Power Options
- Range from 0-500 ppm (Ranges field adjustable)
- Built in LCD for operation and use.
- Front Panel Test Switch, Status Indicator & Buzzer
- Replaceable Sensor
- One / Two Alarm Relays & RS-485 Network Configuration.
- Contact us for more information.
View Product
Greystone CR3 – Cleanroom Monitor
- Greystone CR3 – Cleanroom Monitor
- Measures Temperature, relative humidity & differential pressure sensors
- Stainless steel enclosure
- Integrated Sensor or Remote Sensor Options
- Analog output – 4-20mA
- MODBUS RTY & BACnet Network Integration
- Red LCD Display
- Three distinct displays for temperature, relative humidity & pressure.
- Contact us for more information.
View Product
Hydrogen (H2) Gas Detector
- Hydrogen Fixed Gas Detector
- Low voltage 12-24 Vac/Vdc Gas Detector
- Two separate relays for two alarm levels
- LED Display shows Active Gas Concentration
- Can be configured and calibrated to Hydrogen, Methane & Propane
- Available in %LEL Alarm Options
- Technician Adjustable Settings & Options
- Contact us for more information.
View Product
Hydrogensulphide (H2S) Gas Detector
- H2S – Fixed Toxic Gas Detector.
- Low voltage 12-24 Vac/Vdc Monitor.
- Three separate relays for three alarm levels.
- LED Display shows Active Gas Concentration.
- Available in PPM Alarm Options & Signals.
- Technician Adjustable Settings & Options.
- Built-in buzzer & Sounder Relays.
- Contact us for more information.
View Product
IGD TOCSIN 102 LPG Gas Detector
- IGD TOCSIN 102 – Fixed Gas Detector.
- Available for flammable & toxic gas detection.
- Explosion Proof Certified for Hazardous Areas.
- IP66 Ingress Protection for outdoor installation.
- Enclosure: SS 316 with Flameproof Protection.
- Calibrated to detector LPG 0-100% LEL.
- Support for other hydrocarbon gas detection.
- Contact us for more information.
View Product
Indoor Air Quality Monitor
- Indoor Air Quality Monitor & Sensor.
- Ensure safe working environment in confined areas.
- Fixed Detector for Environmental Monitoring.
- Measure Particulate Matter (PM1.0, PM2.5, PM4.0 & PM10), CO2 (0-10000 PPM), VOC (VOC Index 0-500) or TVOC (1300 PPB or 6000 ug/m3), Relative Humidity (0-100% RH), Temperature (0-60C), Formaldehyde (CH2O).
- Display 6 different gas readings in LCD Display with touchscreen.
- Configurable alarm outputs for signaling / fan activation.
- Networkable using MODBUS & BACnet Integration.
- Contact us for more information.
View Product
Indoor Air Quality Monitors
- Indoor Air Quality Monitors & Detectors – Breathe Cleaner Air.
- Poor air quality can cause fatigue, drowsiness and reduced performance.
- Unit has integrated CO2, PM1, PM2.5, PM10, VOCs, Temperature & R&H.
- Directly integrate to Ventilation Control System & HVAC for Fresh Air.
- Poor air quality can cause fatigue, drowsiness and reduced performance.
- Unit has integrated RS-485 Output, BACnet, Modbus & more as required.
- Standalone room sensors are also available for CO2 (Carbon dioxide).
- LEED compliant for residential & office building for fresh air intake.
- Contact us for more information.
View Product
Indoor CO2 Monitor
- Indoor CO2 Monitor – Ensure Fresh Air whenever CO2 levels increase.
- Increase in CO2 is harmful to the health for extended periods of time.
- Carbon dioxide levels increase over a period of time with more people.
- Directly integrate to Ventilation Control System & HVAC for Fresh Air.
- Built-in BACnet, Modbus & more analog outputs as required for BMS.
- LEED compliant for offices, schools & public areas for fresh air intake.
- Contact us for more information.
View Product
Linear Heat Detector (LHD)
- Linear Heat Detector Cables – QCD Approved
- Can be directly integrated to any FACP.
- Available in 68°C, 88°C, 105°C, 185°C, 230°C.
- Comes in different sheaths based on applications.
- LHD Controller & Alarm Locator with LCD Display available.
- QCD Approved – Direct Integration to Fire Alarm Panel.
- Contact us for more information.
View Product
Sale!
LPG Detector – QCD Approved
- Fixed LPG Gas Detector.
- Low-cost Combustible Gas Detector.
- For use in Kitchens & Indoors.
- Green & Red LED Status Indicators.
- Optional GD-2A Available with Local Buzzer.
- Can be Directly Integrated to Fire Panel (FACP).
- QCD Approved – For use with Fire Alarm System.
- Contact us for more information.
View Product
LPG Gas Detector
- H2/LPG/CH4 Fixed Gas Detector.
- Low voltage 12-24 Vac/Vdc Monitor.
- Three separate relays for two alarm levels.
- LED Display shows Active Gas Concentration.
- Can be configured and calibrated to Hydrogen, Methane & Propane.
- Available in %LEL Alarm Options & Built-in Buzzer.
- Technician Adjustable Settings & Options.
- Contact us for more information.
View Product
Methane (CH4) Gas Detector
- Methane Fixed Gas Detector.
- Low voltage 12-24 Vac/Vdc Gas Detector.
- Two separate relays for two alarm levels.
- LED Display shows Active Gas Concentration.
- Can be configured and calibrated to Hydrogen, Methane & Propane.
- Available in %LEL Alarm Options & Built-in Buzzer.
- Technician Adjustable Settings & Options.
- Contact us for more information.
View Product
Multiscan 8+
- Multiscan 8+ Gas Panel.
- Monitor up-to 16 Gas Detectors – Conventional & Addressable.
- 8 Conventional Gas Detector + 8 Addressable Gas Detector (RS485).
- Support for 4-20mA Analog Signals & RS-485 MODBUS.
- Event logging – For Alarm Monitoring & Signal Activation.
- Battery back-up – Ensure Gas Detection is on in case of power failure.
- Contact us for more information.
View Product
Oxygen (O2) Gas Detector
- Oxygen Gas Detector with Default 20.9% VOL Calibrated.
- 4-20mA Analog Signal Enables to check Deficiency & Enrichment.
- Red LED Display with Green Power Status Indicator.
- Field Configurable Relay Outputs with Custom Values.
- Available in White or Grey Housing – For all designs.
- Easy to Replace Sensor & Maintenance.
- Built-in buzzer – For Alarm Signaling & Activation.
- Contact us for more information.
View Product
Sampling Gas Detector
- Crowcon Environmental Sampling Unit / Sampling Gas Detector.
- Low-cost Air Sampling Unit for HVAC & other critical Equipment.
- Detection of toxic / flammable gases in hot, humid or dusty environments.
- Single Point / Multi Point / Sequential / Aspirated Sample System.
- Low & High Alarms signals to program Relays for Shutdown / AV Units.
- Single Point – Gas Detector using Pellistor / IR Sensor for High Temps.
- Multi Point – Made of Multiple Point for Environmental Gas Monitoring.
- Engineered / Customized Solutions available certified for Hazardous Areas (with 1, 2 or 3 sensors) and Non-Hazardous Areas. Can be programmed for executive action based on detection from multiple detectors.
- Contact us for more information.
View Product
SMART 3-R
- Smart 3-R Gas Detector – For Flammable, Toxic & Oxygen Detection
- Smart 3-R Lite Gas Detector – Refrigerant Detection
- Multi-Colour LED Ring provides aesthetic visual indication.
- Available with a variety of gas sensors & detection.
- 4-20mA Analog Signal – Integration with Gas Panel / PLC.
- Contact us for more information.
View Product
SMART 3G-C2
- SMART 3G-C2 Fixed Gas Detector
- Capable of detecting more than 50 types of Gases.
- Toxic, Flammable, Oxygen & Refrigerant Gases.
- Built-in Self Diagnosis for Fault Identification.
- SIL 2 Certified.
- ATEX Certified for use in Explosive Areas.
- IP 65 Rated with Aluminium Enclosure.
- Contact us for more information.
View Product
SMART S-MS 3A
- SMART S-MS 3A Fixed Gas Detector.
- Can be used for Flammable & Toxic Gases.
- SIL 2 Approved.
- Redundant system ensures SIL 3 Certification.
- IP 65 Protection & Explosion Proof.
- Enclosure: Aluminium or SS
- 3 Relay Outputs for AL1, AL2 & Fault.
- Optional HART.
- Contact us for more information.
View Product
TOC-750 Fixed Gas Detector
- IGD TOC-750 Addressable Gas Detector.
- For Safe Area Installation Only.
- Detection for over 400 Gases & Vapors.
- Multiple I/O Points for Input & Output Control.
- Enclosure: ABS Plastic in White Color.
- Auto Swap of Sensors & Auto Changeover.
- Addressable Detector with IGD Control Panel.
- Contact us for more information.
View Product
TXgard Plus – Flameproof Detector
- TXgard Plus – Flameproof Toxic & Oxygen Gas Detector
- Local LCD Display for menu & magnetic key operation.
- Explosion Proof – ATEX Certified for use in Hazardous Areas.
- Non-Intrusive Calibration with custom Magnetic Key.
- Added Fault & Alarm Relays – For Signaling & Alarm.
- IP65 Protection for use in outdoors – dust & water.
- Contact us for more information.
View Product
Vortex – Gas Control Panel
- Crowcon Vortex – Gas Control Panel.
- Capable up-to 12 Oxygen, Toxic or Flammable Gas Detectors with (including 3 for Fire).
- Each detector assigned 1 Fault Level & 3 Alarm Levels to trigger up-to 32 output relays.
- Push buttons and LED Display enable easy operation – Real Time Gas Readings of Detectors.
- Can be integrated with Manual Call Points & Other Safety Systems – Support for Fire Loops.
- SIL 1 Certified – for use with Safety Instrumented Systems – Functional Safety & Integrity.
- Battery Backup & MODBUS, RS-485 Integration – For BMS & Scada Integration – Networking.
- Available in Wall Mount, 19″ Rack mount, Panel Mount – For all site requirements & design.
- Custom design based for site approved design – for client’s custom PLC Board & Equipment.
- Contact us for more information.
View Product
Vortex FP Compact – Flameproof Gas Panel
- Crowcon Vortex FP Compact – Flameproof Gas Panel
- Used in Hazardous areas – both onshore & offshore.
- Flameproof Gas Detector Control Panel.
- Made with LM25 Aluminium with polyester powder coating.
- Support for up-to 12 Gas Detector (including 3 loops for fire – up-to 20 devices per loop)
- Capable of up-to 16 relay outputs – For Signaling, Fire Panel & PLC Integration.
- RS-485 MODBUS or PROFIBUS – For BMS & SCADA Integration – Networking.
- Event Logger – Store up-to 300 alarm, power, fault, system events.
- Explosion Proof – ATEX Certified for use in hazardous areas.
- Available in FP or FP Compact – Different Sizes & Designs.
- Contact us for configuration & consult.
View Product
Water Detection System
- Water Detection System.
- Relay Outputs Available – For Executive Action & Signaling.
- Cable comes in 3.75m, 7.5m, 15m, 30m, 100m lengths.
- Detects Water Ingress & Initiates Signaling – Linear Wire.
- To be used in Areas with Sensitive Electrical Equipment.
- Server Rooms, Battery Rooms, Switchgear & Storage Areas.
- Contact us for more information.
We have deployed Water Detection System in Several Server Rooms & Storage Areas – Solution Includes Linear Wire & Probe Types. Contact us for more information for best engineering practice to deploy this system in your facility.
View Product
Water Leak Detection System
- Vimpex Hydrosense Water Leak Detection System
- Linear Detection (Wire Type) & Point Detection (Probe Type)
- Types: Conventional System & Addressable System.
- Conventional System: 2, 4 & 8 Zone Panels.
- Addressable System: 2 Loop support for 25km Linear or 500 Probe Type.
- BMS Integration & Relay Outputs / Contacts for FACP Integration.
- Built-in Battery Backup & Fault Monitoring with Event Logs.
- Voice Sounder for Water Leak (Custom Message Support)
- Blue Beacon for Water Leak or Blue Remote LED Indicator.
- Site Specific Accessories & Design Elements for installation.
- For use in Water Sensitive Equipment & Thermal Storage Tank.
- Contact us for more information.
View Product
XgardIQ – SIL 2 Gas Detector
- XgardIQ – Fixed Addressable Gas Detector.
- Used to detect flammable, toxic, oxygen or High Temperature H2S.
- Infrared Sensors Available for Accurate Flammable Gas Detection.
- IP 66 Ingress Protection – To prevent Water & Dust Ingress.
- Remote Sensor Assembly Kits Available for Remote Sensor Placement.
- Explosion Proof – ATEX Certified for use in Hazardous Areas.
- SIL 2 Certified – For Performance & Equipment Integrity with DCS.
- Local OLED Display – Clear & Bright Readings even in sunlight.
- Enclosure: 316 SS – Corrosion Proof & Rust Proof in salty atmospheres.
- Output: 4-20mA Signals & RS-485 MODBUS RTU – Analog & Digital.
- Non-intrusive Calibration – Button Controls for quick and easy use.
- Hot Swappable Sensors – Does not require Hot Work Permit.
- LED Indicators for Detector Status, Fault & Power Indication.
- Event logger – To measure continuous gas monitoring.
- Contact us for more information.
View Product
Xsafe Fixed Gas Detector
- Crowcon Xgard Fixed Gas Detector
- Xsafe – 1kg
- ATEX Certified Fixed Gas Detector
- Low-cost reliable Gas Detector
- Aluminium Enclosure.
- Ability to detect several ranges of flammable gases.
- Hydrogen, LPG, Methane, Ammonia & Other Organics.
- 4-20mA Analog Signals – PLC & Plant Integration.
- Contact us for more information.
View Product

QUICK LINKS

contact us

location

C Ring ROAD,

doha-qatar