Products & Services

Crowngas Offers the Following Products & Services

Showing 85–168 of 177 results

  • Low Cost LPG Gas Detector for Fire Panel Integration by Crowngas Qatar

    Gas Detector

    • Safe Area Gas Detector.
    • Gas Detector available with Gas Panel / Controller.
    • Calibrated to detect LPG, CO, Toxic & Flammable Gas.
    • Flame Detectors available for Zone 2 Areas with QCD.
    • To be used in non-hazardous areas.
    • Basic Ingress Protection from Sun, Water & Dust.
    • Half yearly calibration & maintenance.
    • Contact us for more information.
  • Gas Detector Calibration

    • Gas Detector Calibration – Field Calibration.
    • Annual Maintenance – 24×7 On Call Services.
    • Quarterly Bump Testing & Gas Detector Test.
    • On-site & Field Calibration Services.
    • Half Yearly Comprehensive Calibration & Maintenance.
    • Training & Operation – For End User & Safety Personnel.
    • Upgradation & Replacement of EOL (End of Life) Units at cost.
    • Attested Calibration Reports & Factory Acceptance.
    • Authorized Calibration & After-market service provider.
    • Support for Major Gas Detectors in Market.
    • Testing using certified calibration gas.
    • Contact us for more information.

     

  • Environmental Sampling Units by Crowngas Qatar

    Gas Sampling System

    • Crowcon Air Aspirated Sample Systems/ Gas Sampling System.
    • Only Sampling System usable in Hazardous Area based on installation.
    • Uses eductor for sampling (using Venturi Effect) – The eductor is driven by compressed air to create a negative pressure to draw the sample.
    • Electrical Components are the sensor and Intrinsically Safe flow device.
    • Principle: The air aspirated system uses a compressed air driven vacuum generator to draw a gas sample from a single point. Explosion proof gas detectors are fitted to monitor for flammable gases & toxic gases.
    • Flow rate is limited to 1m/sec – Can be adjusted as per request & approved design with factory approvals.
    • Certified for use in Zone 1 or Zone 2 hazardous areas, IP-65 Rated.
    • Customized Engineered Solutions & Support from Factory for Design.
    • Contact us for more information.
  • Gas Test Services

    Crowngas Offers Bump Test Services & Field Service Kits

    • Bump Test is vital to ensure portable gas detector functionality.
    • Ensuring Single Gas or Multi Gas detector responds to quick gas test.
    • Simple procedure can ensure longevity & safety of portable detector.
    • Bump Test Field Service Kit can ensure multi-year long testing & use.
    • Ensure portable detector has functioning audible & visuals.
    • Wide range of calibration gas – Including Single or Mix.
    • Demonstration & supply of Calibration Kit for site HSE Supervisor.
    • Contact us for more information.
  • Crowcon Gasman Portable Gas Detector

    Gas-Pro – Multi-Gas Portable Detector

    • Crowcon Gas-Pro – Multi Gas Portable Detector
    • Support for up-to 5 Gas Sensors & Detection.
    • Support for large variety of toxic & flammable gases.
    • Display for real time readings – Clear & Precise.
    • Rechargeable – Explosion Proof Adaptor.
    • IP 65 and IP 67 protection – Prevent dust & water ingress.
    • Pumped & Diffusion Options – To check for confined spaces.
    • Bump & calibration reminders for HSE & Site compliance.
    • Contact us for more information.
  • Crowcon Gasman Portable Gas Detector

    Gas-Pro IR – Portable Gas Detector

    • Crowcon Gas-Pro IR – Portable Gas Detector
    • Detection of flammable gases using IR (Infrared).
    • Extremely accurate & reliable with increase safety.
    • Extremely durable in low oxygen environments.
    • Immune to sensor poisoning / inhibition & high levels of gas.
    • Useful in low oxygen or high concentration environments.
    • IP 65 and IP67 rated – to prevent water & dust ingress.
    • Explosion Proof – ATEX Certified for use in hazardous areas.
    • Ensure regular bump test & calibration for the portable.
    • Contact us for more information.
  • Single Channel for 1 Gas Detector Remote Control Box by Crowngas Qatar

    Gasflag – Single Detector Controller

    • Crowcon Gasflag – Single Channel Monitor.
    • Capable of monitoring one 4-20mA flammable, toxic or oxygen gas detector.
    • Can be used in LPG Monitoring or locations with 1 Gas Detector.
    • 3 Relay Outputs – For Alarm 1, Alarm 2 & Fault Relay Activation.
    • Rising & Falling Alarm Setpoints for Oxygen Detectors.
    • Two Rising Alarms for Flammable & Toxic Detectors.
    • Can be used for any 4-20mA Analog Gas Detector.
    • IP-20 Protection – Basic Protection from Dust.
    • Contact us for more information.
  • Crowcon Gasman Portable Gas Detector

    Gasman – Portable Gas Detector

    • Crowcon Gasman – Portable Single Gas Detector
    • Single Gas Detector – To Detect Single Gas.
    • Built in 95dB Alarm and easy to read display.
    • IP 65 rated – To prevent dust & water ingress.
    • Internal vibration during Alarm to alert user.
    • Available with Rechargeable & Non-Rechargeable.
    • Available in Several Toxic & Flammable Gas Options.
    • Contact us for more information.
  • Gasmaster 4 Channel Control Panel for Gas Detectors by Crowngas Qatar

    Gasmaster – Gas Control Panel

    • Crowcon Gasmaster – 1-4 Channel Control Panel.
    • Capable up-to 4 Oxygen or Toxic Gas Detectors.
    • Each detector assigned 2 levels of independent alarm.
    • Push buttons and LED Display enable easy operation.
    • Functional Certification & Capable – SIL 2 Certified.
    • Battery Backup – For operation in case of power failure.
    • Fire Alarm Control Panel Integration & Networking.
    • RS-485 MODBUS RTU – Network & BMS Integration.
    • Event Logger – To Measure, Fire, Gas & Fault Alarms.
    • Contact us for more information.
  • Gastec Detector Tube Pump

    • Gastec Detector Tube Pump.
    • Gastec Gas Sampling Pumps to be used for air sampling.
    • Pumps are intrinsically safe, pre-calibrated and reliable.
    • Detector tube pumps with optional counter for pump count.
    • Tube to be used with Gastec Detector Tubes for gas analysis.
    • Pre-calibrated 50mL and 100mL strokes for accurate testing.
    • Built-in tip breaker for Gastec detector tubes for convenience.
    • Built-in Flow Finish Indicator ensures completion of stroke.
    • Accessories include extension hose, probe holder, extension pole.
    • Pump handles have markers for full and half stroke (100ml / 50ml).
    • Contact us for more information.
  • Gastec Detector Tubes

    • Gastec Detector Tubes.
    • Spot measurement of single gas in atmosphere.
    • Available for a wide range of toxic and flammable gases.
    • Offered tubes are to be used with Gastec Pump.
    • Tubes available in wide variety of scale and units.
    • Tubes need to be kept in cool environment.
    • Gastec Detector have shelf life from factory.
    • Gastec tubes can be used in any environment.
    • Smoke detector tubes used for analyzing air.
    • Detect several kinds of airborne gases / vapors.
    • Gas detector tubes can be used to detect pollutants.
    • Sampling tubes available for over 300 toxic gases.
    • Fume hood confined space gas or CSHHH assessments.
    • Made in Japan – SEI Certified Gas Detector Tubes.
    • Contact us for more information.
  • GECA Gas Detector

    • GECA Fixed Gas Detector – For LPG & Flammable Gases / Fumes
    • Approved for Installation in LPG Gas Piped Areas
    • Commercial Gas Detector with Controls & Indicators
    • Contact us for more information.
  • GENT – Fire Alarm System & Accessories

    • Honeywell Gent – Fire Alarm System – Addressable Detectors.
    • Gent Optical Detector (S4-715) c/w Base (S4-700)
    • Gent Sounder (S3-S-R S3)
    • Gent Heat Detector (S4-720) c/2 Base (S4-700)
    • Gent MCP (RF-805) c/w Resettable Element
    • Gent S4 Heat Detector with Sounder (S4-780-S)
    • Gent S3 – Red Body Sounder & Visual (S3-S-VAD-HPR-R)
    • Gent Beam Sensor Transmitter (S4-34741)
    • Gent Beam Sensor Receiver (S4-34742)
    • Gent Sounder Beacon (CWSS-RR-S5)
    • Gent Vigilon Control Panel System
  • Greystone CERMC Series – Indoor Carbon Dioxide Detector

    • Greystone CERMC – Indoor Carbon Dioxide Transmitter
    • NDIR Sensor for Long Life CO2 Readings
    • 4-20mA Analog Output, MODBUS Outputs & Relay Outputs
    • Optional Temperature Sensor
    • Contact us for more information.
  • Greystone CMD5B1 – Carbon Monoxide (CO) Detector

    • Greystone CMD5B1000 & Other – CO Detector
    • 0-300ppm CO Range – For use in Carparks
    • Analog 4-20mA Output or MODBUS
    • AC or DC Power Options.
    • Inbuilt relay for low powered device activation.
    • Easy and quick calibration.
    • Contact us for more information.
  • Greystone CMD5B5 Series – Duct Carbon Monoxide Detector

    • Greystone CMD5B5 Series – Duct Carbon Monoxide Detector
    • Analog 4-20mA Output or BACnet & MODBUS Output
    • AC or DC Power Options
    • Range from 0-500 ppm (Ranges field adjustable)
    • Built in LCD for operation and use.
    • Front Panel Test Switch, Status Indicator & Buzzer
    • Replaceable Sensor
    • One / Two Alarm Relays & RS-485 Network Configuration.
    • Contact us for more information.
  • Greystone CR3 – Cleanroom Monitor

    • Greystone CR3 – Cleanroom Monitor
    • Measures Temperature, relative humidity & differential pressure sensors
    • Stainless steel enclosure
    • Integrated Sensor or Remote Sensor Options
    • Analog output – 4-20mA
    • MODBUS RTY & BACnet Network Integration
    • Red LCD Display
    • Three distinct displays for temperature, relative humidity & pressure.
    • Contact us for more information.
  • GST – Fire Alarm System & Accessories

    • EST Conventional Fire Panel System
    • Available in 2 Zone / 4 Zone / 8 Zone / 16 Zone Conventional Fire Alarm Panel
    • GST Photoelectric Smoke Detector
    • GST Heat Detector
    • GST Manual Call Point
    • GST Sounder Flasher – Clear Lens (Indoor)
    • GST Sounder Flasher – Weatherproof – Red Lens – IP65
    • QCD Approved – Supply & Trading Only.
    • Contact us for more information.
  • Hawke – Explosion Proof Cable Gland & Accessories

    • Explosion Proof Glands – M20, Individual Cable Glands for Barrier Seal, M25
    • Explosion Proof Breather Drains – Prevent Condensation & Moisture in Enclosures
    • Explosion Proof Adaptor & Reducer
    • Explosion Proof Dome Stopping Plugs
    • Explosion Proof Male Female Connector – For Low Power, Medium Power & High-Power Signals / Power
  • Hazardous Area Telephone

    • Funke Huster Fernsig – IP Telephone.
    • Explosion Proof IP Telephone – Tropicalized.
    • For use in Zone 1, 2, 21 & 22 Hazardous Areas.
    • Polycarbonate Material & Body – Strong & Sturdy.
    • Surface Mount or Wall Mount for Field Installation.
    • Illuminated LCD Display & Keypad – For Dark Environments.
    • Supports H.323, SIP, TSIP, SIPS Protocols & Other Standards.
    • Display with integrated heating for ultra-low temperature environments.
    • Integrated Beacon/Sounder for Telephone Relay Initiate.
    • Contact for more information.
  • Heat Detector Tester

    • Solo Heat Detector Tester in Qatar.
    • Solo 460 – Cordless Heat Detector Tester Head.
    • Solo 461 – Cordless Heat Detector Tester Kit.
    • Solo 424 – Mains Powered Heat Detector Tester.
    • Ex-stock subject to prior sales.
  • Hochiki LEAKalarm – Water Leak Detection

    • Hochiki LEAKalarm – Water Leak Detection System
    • Linear Detection (Wire Type) & Point Detection (Probe Type)
    • Types: Conventional System & Addressable System.
    • Conventional System: 2, 4 & 8 Zone Panels.
    • Addressable System: 2 Loop support for 25km Linear or 500 Probe Type.
    • BMS Integration & Relay Outputs / Contacts for FACP Integration.
    • Built-in Battery Backup & Fault Monitoring with Event Logs.
    • Voice Sounder for Water Leak (Custom Message Support)
    • Blue Beacon for Water Leak or Blue Remote LED Indicator.
    • Blue Manual Call Points for Shutdown of Plant Valves.
    • Site Specific Accessories & Design Elements for installation.
    • For use in Water Sensitive Equipment & Thermal Storage Tank.
    • Contact us for more information.
  • Hydrogen H2 / Methane CH4 / Propane LPG C3H8 Gas Detector by Crowngas Qatar

    Hydrogen (H2) Gas Detector

    • Hydrogen Fixed Gas Detector
    • Low voltage 12-24 Vac/Vdc Gas Detector
    • Two separate relays for two alarm levels
    • LED Display shows Active Gas Concentration
    • Can be configured and calibrated to Hydrogen, Methane & Propane
    • Available in %LEL Alarm Options
    • Technician Adjustable Settings & Options
    • Contact us for more information.
  • Ammonia NH3 Gas Detector by Crowngas Qatar

    Hydrogensulphide (H2S) Gas Detector

    • H2S – Fixed Toxic Gas Detector.
    • Low voltage 12-24 Vac/Vdc Monitor.
    • Three separate relays for three alarm levels.
    • LED Display shows Active Gas Concentration.
    • Available in PPM Alarm Options & Signals.
    • Technician Adjustable Settings & Options.
    • Built-in buzzer & Sounder Relays.
    • Contact us for more information.
  • IGD TOCSIN 102 LPG Gas Detector

    • IGD TOCSIN 102 – Fixed Gas Detector.
    • Available for flammable & toxic gas detection.
    • Explosion Proof Certified for Hazardous Areas.
    • IP66 Ingress Protection for outdoor installation.
    • Enclosure: SS 316 with Flameproof Protection.
    • Calibrated to detector LPG 0-100% LEL.
    • Support for other hydrocarbon gas detection.
    • Contact us for more information.
  • Indoor Air Quality Monitor

    • Indoor Air Quality Monitor & Sensor.
    • Ensure safe working environment in confined areas.
    • Fixed Detector for Environmental Monitoring.
    • Measure Particulate Matter (PM1.0, PM2.5, PM4.0 & PM10), CO2 (0-10000 PPM), VOC (VOC Index 0-500) or TVOC (1300 PPB or 6000 ug/m3), Relative Humidity (0-100% RH), Temperature (0-60C), Formaldehyde (CH2O).
    • Display 6 different gas readings in LCD Display with touchscreen.
    • Configurable alarm outputs for signaling / fan activation.
    • Networkable using MODBUS & BACnet Integration.
    • Contact us for more information.
  • Jactone JT510 Fire Blankets

    • Jactone JT510 Fire Blankets.
    • Part No: JT510
    • Size: 1.8m x 1.2m
    • Ex-stock & QCDD Approved.
  • KAC – Manual Call Points

    • KAC – Manual Call Point
    • Variants: Break Glass, Key, Manual Reset Call Points.
    • Available in Different Colours, Messages & Image/Logo.
    • Suitable for indoor & outdoor installations with different IP ratings.
    • Built in LED for annunciation of activation/testing of system.
    • Waterproof Version Available for use in areas with water & dust ingress.
    • Extinguishing MCP, Smoke Vent, Emergency Door Release & Fire Alarm.
    • Contact us for more information on integration with your system.
  • LaserMethane Smart

    • LaserMethane Smart – Compact Methane Gas Detector
    • Shoots Laser at an Inspection Point
    • Logs measured value to an image and time.
    • Can be used at a distance of 30m Away.
    • Green Laser can also be used Outdoors.
    • Laser Beam uses IR Rays to obtain value.
    • Includes Bluetooth (Optional) & MicroSD.
    • For use with Methane or Natural Gases.
    • Range: 1 – 50,000 ppm.
    • Response Time in 0.1s
    • IP 54 Rated
    • Explosion Proof
    • Contact us for more information.
  • Linear Heat Detector by Crowngas Qatar

    Linear Heat Detector (LHD)

    • Linear Heat Detector Cables – QCD Approved
    • Can be directly integrated to any FACP.
    • Available in 68°C, 88°C, 105°C, 185°C, 230°C.
    • Comes in different sheaths based on applications.
    • LHD Controller & Alarm Locator with LCD Display available.
    • QCD Approved – Direct Integration to Fire Alarm Panel.
    • Contact us for more information.
  • Sale! Low Cost LPG Gas Detector for Fire Panel Integration by Crowngas Qatar

    LPG Detector – QCD Approved

    • Fixed LPG Gas Detector.
    • Low-cost Combustible Gas Detector.
    • For use in Kitchens & Indoors.
    • Green & Red LED Status Indicators.
    • Optional GD-2A Available with Local Buzzer.
    • Can be Directly Integrated to Fire Panel (FACP).
    • QCD Approved – For use with Fire Alarm System.
    • Contact us for more information.
  • Hydrogen H2 / Methane CH4 / Propane LPG C3H8 Gas Detector by Crowngas Qatar

    LPG Gas Detector

    • H2/LPG/CH4 Fixed Gas Detector.
    • Low voltage 12-24 Vac/Vdc Monitor.
    • Three separate relays for two alarm levels.
    • LED Display shows Active Gas Concentration.
    • Can be configured and calibrated to Hydrogen, Methane & Propane.
    • Available in %LEL Alarm Options & Built-in Buzzer.
    • Technician Adjustable Settings & Options.
    • Contact us for more information.
  • MEDC – Break Glass – Manual Call Point

    • MEDC Break Glass Manual Call Point
    • For use in Hazardous Areas
    • SIL 2 Certified
    • Available in GRP Enclosure, LM35 Aluminium or SS 316
    • Optional LED Indicator & Lift Flap
    • In-line & end of line resistors.
    • SS Screws for fixing
    • IP 66, IP 67, IP 68 Rated
    • Key operated Test Facility
    • Contact for more information.
  • MEDC – Intrinsically Safe Xenon Beacons

    • MEDC XB8 Intrinsically Safe Beacons
    • Corrosion Resistant
    • Enclosure: GRP
    • High Intensity Flash
    • Clear Lens
    • Contact for more information.
  • MEDC – LED Beacon

    • LED Beacon
    • Explosion Proof for use in Hazardous Areas
    • MEDC LD15, MEDC SM87LED & Other Crouse-Hinds Series
    • SIL 1 Approval
    • Enclosure: UV Stable GRP, LM35 Aluminium, SS 316
    • SS Screws Included
    • Low Maintenance LED Array
    • Contact for more information & design.
  • MEDC – Pull Handle Call Point

    • MEDC PH1 Pull Handle Call Point
    • For use in Explosive Atmospheres
    • SIL 1 Certified
    • Corrosion Resistant
    • Enclosure: GRP with SS Cover
    • In-line & End of Line Resistors
    • SS Screws
    • Contact for more information and design.
  • MEDC – Pushbutton – Manual Call Point

    • MEDC Pushbutton designed for use in Hazardous Area & Explosive Atmospheres
    • SIL 2 Certified, Intrinsically Safe & Flameproof
    • Enclosure in GRP, LM35 High Grade Aluminium Alloy or SS 316
    • IP 66, IP 67 & IP 68 Rated
    • Lift Flap
    • Optional LED Indicator & In line, EOL Resistor
    • Standard Latching
    • Contact for more information
  • MEDC – Safe Area Xenon Beacons

    • MEDC Safe Area Xenon Beacons
    • Available in Weatherproof for Outdoor Areas – IP 65
    • High Intensity Flash
    • Enclosure: Corrosion Resistant GRP
    • Optional Lens Guard
    • Multi Lens & Enclosure Colours Available
    • Contact for more information & design.
  • MEDC – Sounder

    • MEDC Intrinsically Safe Sounders, Weatherproof Sounders & Metallic Sounders
    • MEDC DB7, DB3BM, DB15 & Other Sounder Range
    • Sounder for use in Hazardous & Explosive Atmospheres
    • 27 Adjustable Tones & Settings
    • SS Screws
    • Enclosure: GRP, LM35 or SS
    • Colour: Red as Standard
    • Custom Colours, Tags & Labels
    • Contact for more information.
  • MEDC – Xenon Beacon

    • MEDC High Output Xenon Beacons
    • SM87HXB, XB11, XB12, XB15, XB4
    • Designed for use in Hazardous Areas
    • Enclosure: GRP, LM35 Aluminium, SS 316
    • SIL 1, SIL 2 Beacons Available
    • Various Lens Color, Enclosure, Flashing Rates & Outputs
    • 5J, 10J, 15 & 21 Joule Beacons
    • Custom tag & duty plates
    • Beacon / Sounder Combination unit Available
    • SS Screws
    • Contact for more information.
  • MEDC TH12 – Rotating Beacon

    • MEDC TH12 Rotating Beacon
    • For use in Explosive Atmospheres
    • Optional Steel Backstrap & lens guard
    • Custom flashing & rotating speeds
    • Tungsten Halogen Bulb
    • Enclosure: GRP
    • SS Screws
    • Contact for more information & design.
  • Hydrogen H2 / Methane CH4 / Propane LPG C3H8 Gas Detector by Crowngas Qatar

    Methane (CH4) Gas Detector

    • Methane Fixed Gas Detector.
    • Low voltage 12-24 Vac/Vdc Gas Detector.
    • Two separate relays for two alarm levels.
    • LED Display shows Active Gas Concentration.
    • Can be configured and calibrated to Hydrogen, Methane & Propane.
    • Available in %LEL Alarm Options & Built-in Buzzer.
    • Technician Adjustable Settings & Options.
    • Contact us for more information.
  • Galvanic Isolator by Crowngas Qatar

    MTL – Galvanic Isolator

    • MTL4500/5500 Range of Galvanic Isolator.
    • Can be used to control volt-free contacts in a safe area.
    • Compact modular design with DIN rail support.
    • Single & multi-channel I/O modules.
    • 3-port isolation & Variety of models for different applications.
    • Explosion Proof – ATEX certified & Function safety approval.
    • Available Models: MTL5561 Fire and Smoke Detector Interface, MTL5051 Serial Data Comms Isolator, MTL5500 Range Intrinsically Safe Galvanic Isolators, MTL5510 Four Channel Multi-Function Switch / Proximity Detector, MTL5513 Two Channel Line Fault Detection Switch / Proximity Detector, MTL5514 Relay Output Switch / Proximity Detector, MTL5521 Solenoid / Alarm Driver, MTL5521-T Loop Powered Solenoid / Alarm Driver, MTL5522 Loop Powered Solenoid / Alarm Driver, MTL5523 Solenoid / Alarm Driver, MTL5524 Switch Operated Solenoid Driver, MTL5525 Switch Operated Solenoid Driver – Low Power, MTL5526 Switch Operated Relay, MTL5573 Temperature Converter
    • Contact us for more information.
  • Zener Barrier by Crowngas Qatar

    MTL – Zener Barrier

    • MTL7700 Range of Zener Barrier.
    • Compact modular design with DIN rail support.
    • Zener Barriers are used in Intrinsically Safe (I.S) Loops.
    • Explosion Proof – ATEX & Function safety approval Certified.
    • Available Analogue Models: MTL7756ac / MTL7760ac Resistance temperature detectors Thermocouples, ac sensors, MTL7706+ / MTL7787+ Transmitters, 2-wire, 4/20mA, MTL7728+ / MTL7787+ Controller outputs, online line earthed Controller outputs, neither line earthed.
    • Available Digital Models: MTL7787+ / MTL7741/3 Switches, MTL7728 Solenoids, alarms, LEDs.
    • Contact us for more information.
  • Sensitron SMART-3R Gas Detector for Safe Areas by Crowngas Qatar

    Multiscan 8+

    • Multiscan 8+ Gas Panel.
    • Monitor up-to 16 Gas Detectors – Conventional & Addressable.
    • 8 Conventional Gas Detector + 8 Addressable Gas Detector (RS485).
    • Support for 4-20mA Analog Signals & RS-485 MODBUS.
    • Event logging – For Alarm Monitoring & Signal Activation.
    • Battery back-up – Ensure Gas Detection is on in case of power failure.
    • Contact us for more information.
  • Multiscan++S2

    • Crowcon Multiscan++S2 Gas Control Panel
    • SIL 2 Certified for use in demanding areas.
    • Monitor & manage up-to 256 Gas Detectors.
    • Enclosure: ABS or Aluminium Rack
    • Support for 16 / 32 /   64 / 128 / 256 Inputs.
    • Support for 32 / 64 / 128 / 256 / 516 Outputs.
    • Internal Self-Test to detect failures.
    • Available in Panel & Rack Mount for use in custom racks.
    • Galvanic isolated loops for hazardous area installation.
    • Digital Communication between detectors.
    • Explosion Proof Certified for use in Hazardous Areas.
    • Built in event log & Status LED.
    • Contact us for more information.
  • Notifier – Fire Alarm – Smoke & Heat Detectors – Modules

    • Notifier Fire Alarm System by Honeywell
    • Notifier FSP-851 Addressable Photoelectric Smoke Detector
    • Notifier FST-851 Addressable Heat Detector
    • Notifier Addressable Manual Call Point
    • Notifier FMM-1 Addressable Monitor Module
    • Notifier FRM-1 Addressable Relay Module
    • Notifier FCM-1 Addressable Control Module
    • Notifier FZM-1 Zone Interface Monitor Module
    • QCD Approved – Supply & Trading Only.
    • Contact us for more information.
  • Notifier FRM-1 Relay Control Module

    • Notifier FRM-1 Addressable Control Relay Module.
    • Dry contact output for activating auxiliary devices.
    • Relay contains two sets of DPDT Switch contacts.
    • Integral LED “blinks” green for communication.
    • Integral LED turns red when activated or switched.
    • High noise immunity to EMF/RFI & Wide LED view.
    • Ex-stock for use with Notifier Fire Alarm Systems.
  • Outdoor Air Quality Monitor

    • Outdoor Air Quality Monitor.
    • Measure Total Particulate Matter & Pollutants.
    • IP 65 Enclosure to prevent dust & water ingress.
    • Detect PM1.0, PM2,5., PM4.0 & PM10 Particles.
    • Analog, Digital, BACnet & MODBUS Integration.
    • 24 Vac/dc Power Supply Support – BMS & FACP.
    • Internal LCD Display & IAQ Value Index Display.
    • Ensure safe & secure working atmosphere.
    • Contact us for more information.
  • Oxygen O2 Gas Detector Macurco Make by Crowngas Qatar

    Oxygen (O2) Gas Detector

    • Oxygen Gas Detector with Default 20.9% VOL Calibrated.
    • 4-20mA Analog Signal Enables to check Deficiency & Enrichment.
    • Red LED Display with Green Power Status Indicator.
    • Field Configurable Relay Outputs with Custom Values.
    • Available in White or Grey Housing – For all designs.
    • Easy to Replace Sensor & Maintenance.
    • Built-in buzzer – For Alarm Signaling & Activation.
    • Contact us for more information.
  • Patol – Aspirating Smoke Detector (ASD & HSSD)

    • Patol Securiton – Aspirating Smoke Detector
    • Support for 1 Detector, 2 & 3.
    • Available in Normal Sensitivity & High Sensitivity.
    • Support for up-to 5 Alarms (3 Pre-Alarms & 2 Alarms)
    • 1 or 2 Sampling Lines with Separate Detectors & Air flow Monitors.
    • Certified calculation software & pipe flow for accurate layout.
    • Low power consumption & high-power suction.
    • Replaceable components & spares.
    • Sampling Pipes – PVC, ABS, Copper & Stainless Steel.
    • Flex Hose for use in concrete and flexible installation.
    • Capillary tubes (for use in false ceilings).
    • Available Dust filters, trap boxes & water retaining boxes.
    • Air cooler/heater as per temperature & relative humidity.
    • Auxiliary housing & flame arresters for Explosion Proof Application.
    • Contact us for more information.
  • Petrol Leak Detection System

    • Petrol Leak Detection System for use near Petrol Storage Tanks.
    • Explosion Proof (ATEX) Rated Sensor for detection of Fuel Oils.
    • Intrinsically safe for use in hazardous atmospheres.
    • Sensor to be surface mounted on level platforms or leak sites.
    • Sensor certified for Ex II 1 Ex ia T4 Ga for use in Zone 1 Areas.
    • Control Panel / Controller available to monitor oil leaks & alarms.
    • Optional sounder to be mounted for alarm & annunciation.
    • Contact us for more information.
  • Portable Detector Calibration

    • Portable Detector Calibration – Field Calibration.
    • Annual Maintenance – 24×7 On Call Services.
    • Monthly Gas Test / Bump Test – Safety Requirement.
    • Full Certified Calibration at 6 Month Interval.
    • On-site & Field Calibration Services – For Portable.
    • Training & Operation for Field Portable Devices.
    • Upgradation & Replacement of EOL (End of Life) Units at cost.
    • Attested Calibration Reports & Monthly Gas Test / Bump Test report.
    • Regular Updation of Maintenance Logs & device fit for use.
    • Physical Inspection for Damage to Enclosure & Dust Ingress.
    • Contact us for more information.

     

  • Refrigerant Leak Detector

    • Refrigerant Leak Detector.
    • Easily detect refrigerant leaks.
    • Detectable Refrigerants – R-22, R134a, R-404A, R-410A, R-507, R438A, major CFCs, HFCs & HCFCs.
    • Replaceable batteries for 16 hours continuous use.
    • Highly sensitive to refrigerant gases.
    • High/low sensitivity adjustment option.
    • LED indicator and audible alarm for refrigerant leak.
    • Automatic zeroing & rugged enclosure for long use.
    • Contact us for more information.
  • Rotating Beacons

    • Federal Signal Red Rotating Beacons.
    • Rated for 24Vdc Power Supply.
    • Integrated 1/2″ NPT Pipe & Surface Mount.
    • Rated for indoor & outdoor use.
    • IP66 Ingress Protection with Nema 4X Rated.
    • IP69K Compliant – For Adverse Locations.
    • Handle high pressure sprays & temperatures.
    • QCD Approved for Fire Alarm System.
    • Contact us for more information.
  • Roxtec Cable & Pipe Seal

    • Roxtec Cable Transit
    • Sealing Modules with Cores
    • Used to seal Pipes, Cables & Wires of Different Diameters
    • Varying Diameters and Sizes
  • Openpath Flammable Gas Detector by Crowngas Qatar

    SafEye Open Path Flame Detectors

    • Open Path IR Flame Detector.
    • Range up-to 200m for detection.
    • Explosion Proof – ATEX Certified.
    • Heated windows to prevent condensation.
    • SIL 2 Approved for functionality.
    • FM Approved for use with Fire Alarm.
    • QCD Approved.
    • Contact us for more information.
  • Environmental Sampling Units by Crowngas Qatar

    Sampling Gas Detector

    • Crowcon Environmental Sampling Unit / Sampling Gas Detector.
    • Low-cost Air Sampling Unit for HVAC & other critical Equipment.
    • Detection of toxic / flammable gases in hot, humid or dusty environments.
    • Single Point / Multi Point / Sequential / Aspirated Sample System.
    • Low & High Alarms signals to program Relays for Shutdown / AV Units.
    • Single Point – Gas Detector using Pellistor / IR Sensor for High Temps.
    • Multi Point – Made of Multiple Point for Environmental Gas Monitoring.
    • Engineered / Customized Solutions available certified for Hazardous Areas (with 1, 2 or 3 sensors) and Non-Hazardous Areas. Can be programmed for executive action based on detection from multiple detectors.
    • Contact us for more information.
  • Schneider Electric Enclosures

    • Schneider Electric Multi-Purpose Enclosures
    • Available in Different Height, Width & Depth
    • Wall-Mount & Server Rack Mounts Available
    • Available with Cable Gland Plate (on Top), Door & Lock
    • Available With or Without Mounting Plate
    • Enclosures coming with Transparent Door
    • Multiple IP Ratings: IP 65, IP 66, IP 67
    • Explosion proof (ATEX Certified) Enclosures
    • Contact for more information.
  • Siemens – Fire Alarm – Smoke & Heat Detectors – Modules

    • Siemens Fire Alarm System – Smoke & Heat Detectors & Modules
    • Siemens HFP-11 Addressable Smoke Detector
    • Siemens HFPT-11 Addressable Heat Detector
    • Siemens OP921 Addressable Photoelectric Smoke Detector
    • Siemens HMS-S Addressable MCP – Pull Station
    • Siemens HTRI-D Dual Input Interface Module
    • Siemens HTRI-S Single Input Module
    • Siemens Sounder Strobe
    • QCD Approved – Supply & Trading Only.
    • Contact us for more information.
  • Simplex – Fire Alarm System & Accessories

    • Simplex Addressable Fire Alarm Control Panel
    • Simplex Addressable Heat Detector
    • Simplex Addressable Smoke Detector
    • Simplex Conventional Horn Strobe – Sounder Flasher
    • Simplex Addressable Relay Module
    • Simplex Addressable Manual Call Point – Pull Station
    • QCD Approved – Supply & Trading Only.
    • Contact us for more information.
  • Sensitron SMART-3R Gas Detector for Safe Areas by Crowngas Qatar

    SMART 3-R

    • Smart 3-R Gas Detector – For Flammable, Toxic & Oxygen Detection
    • Smart 3-R Lite Gas Detector – Refrigerant Detection
    • Multi-Colour LED Ring provides aesthetic visual indication.
    • Available with a variety of gas sensors & detection.
    • 4-20mA Analog Signal – Integration with Gas Panel / PLC.
    • Contact us for more information.
  • SMART 3G-C2

    • SMART 3G-C2 Fixed Gas Detector
    • Capable of detecting more than 50 types of Gases.
    • Toxic, Flammable, Oxygen & Refrigerant Gases.
    • Built-in Self Diagnosis for Fault Identification.
    • SIL 2 Certified.
    • ATEX Certified for use in Explosive Areas.
    • IP 65 Rated with Aluminium Enclosure.
    • Contact us for more information.
  • SMART 3G-D2

    • SMART 3G-D2 Fixed Gas Detector.
    • Can be used for flammable, toxic & refrigerant gases.
    • SIL 2 Certified & ATEX Certified for use in Explosion Proof Areas.
    • Non-intrusive Calibration using Magnetic keys.
    • Capable of SIL 3 Certification with applicable system.
    • Intrinsically Safe Version Available.
    • IP 65 Ingress Protection.
    • LCD Display, 5 Status LED & 4 Indicator LED.
    • 4-20mA Analog Outputs & RS485 Addressable Output.
    • Green LED Ring around Display for Alarm Status Indication.
    • Contact us for more information.
  • SMART S-MS 3A

    • SMART S-MS 3A Fixed Gas Detector.
    • Can be used for Flammable & Toxic Gases.
    • SIL 2 Approved.
    • Redundant system ensures SIL 3 Certification.
    • IP 65 Protection & Explosion Proof.
    • Enclosure: Aluminium or SS
    • 3 Relay Outputs for AL1, AL2 & Fault.
    • Optional HART.
    • Contact us for more information.
  • Smoke Detector Tester

    • Smoke Detector Tester in Qatar.
    • Solo A5 – Aerosol Based for Manual Smoke Testing.
    • Solo A10 – HFC-Free Manual Smoke Detector Tester.
    • Solo A10S – HFC-Free Smoke Detector for Solo 330.
    • Solo 330 – Hand-held dispenser to use with Solo A5 & A10S.
    • Solo A7 – Detector Duster for Cleaning Detectors from residue.
    • Ex-stock subject to prior sales.
  • Solex – Xenon Fire Alarm Beacon

    • Solex Fulleon – Xenon Fire Alarm Beacon
    • Available in Different Light Outputs – 2.5Cd, 10Cd & 15Cd
    • Flash Rate: 1Hz
    • IP 54 & IP 65 Options – For Indoors & Outdoors
    • Power: 24Vdc & 110Vac
    • Enclosure: ABS with Polycarbonate Lens
    • Available in Different Light Colour
    • Base: Red or White
    • QCD Approved.
  • Solo 100 Telescopic Access Poles

    • Solo 100 Telescopic Access Poles.
    • Extension from 1.26m to 4.5m (6m total).
    • Made from strengthened durable fiberglass.
    • Lightweight and portable tester poles.
    • Non-conductive material for risk free use.
    • “TotalLock” system ensures sections never lock.
    • Increase Height using Solo 101 for max. height of 9m.
    • Designed for Smoke Detectors placed at tall ceiling.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
  • Solo 200 Detector Removal Tool

    • Solo 200 Detector Removal Tool.
    • Universal Detector Removal Tool.
    • Remove Smoke & Heat Detectors with ease.
    • Ideal for removal of most types of detectors.
    • Enables removal & replacement of detectors.
    • Adjustable for different sizes of detectors.
    • Color coded for different sizes of detectors.
    • Universal joint so tool never bends when in use.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
  • Sale!

    Solo 330 Aerosol Smoke & CO Dispenser

    • Solo 330 Aerosol Smoke & CO Dispenser.
    • QCD Approved for use with all detectors.
    • Quick & strong for aerosol delivery.
    • Transparent cup to view detector LED.
    • Use at variety of heights and angles.
    • Suitable for detectors up-to 177mm in diameter.
    • Height adjusting accessories & poles.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
  • Solo 365 Smoke Detector Tester

    • Solo 365 Smoke Detector Tester
    • ‘Auto-start’ proximity sensor – faster testing, less smoke waste
    • Auto-LED torch – allows simple testing of detectors in dark areas
    • Slim-line design – easier access to detectors in confined spaces
    • Clearing mode – eliminates re-alarms, increasing productivity
    • Delayed start mode – for non-standard detectors and ASD systems
    • Included – 1 x Solo 365 Head Unit, 1 x Solo 370 Lithium-Ion Battery Pack, 1 x Solo 371 Smoke Generator, 1 x Solo ES3 Smoke Cartridge, 1 x Spare 1060 Charger & USB Lead
    • Additional Accessories Available – Multi Height Testers.
    • Contact us for more information.
  • Solo 461 Cordless Heat Detector Tester

    • Solo 461 Wireless Heat Detector Tester.
    • Industry-standard for testing heat detector.
    • Battery-powered c/w charger.
    • Immediate & fast activation.
    • Can be used for Fixed Temperature Heat Detector.
    • Can be used for Rate-of-rise Heat Detector.
    • Can be used for Multi-sensor or Combination Detector,
    • Two separate battery batons for continued use.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
  • Sale!

    Solo 461 Heat Detector Tester Kit

    • Solo 461 Heat Detector Tester Kit.
    • Battery powered heat detector tester kit.
    • Can be connected to Solo Access poles to reach up-to 9 metres.
    • Heat is focused directly into the detector sensor for fast testing.
    • Can trigger majority of spot & point heat detectors into alarm.
    • Powered by battery baton fitted within the pole for cordless use.
    • Transparent cup for clear view of detector LED & activation.
    • Automatically goes into standby after 120s for protection.
    • Switches off completely after 5 minutes in standby.
    • Provided with 1x battery baton and 240V fast charger.
    • 3000mAh battery ensures longer testing per charge.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
  • Sale!

    Solo A3 Smoke Detector Test Gas

    • Solo A3 Smoke Detector Test Can.
    • Hand-held Test Gas Can – Fast Results.
    • Delivers Smoke to Detector immediately.
    • Standard Product to Test Smoke Detectors.
    • UL Certified for use with Fire Alarm Testing.
    • Contact us for more information.

    Solo A3 is obsolete as of 2016, kindly use Solo A5.

    Solo A5 Smoke Detector Tester

  • Sale!

    Solo A5 Smoke Detector Tester

    • Solo A5 Smoke Detector Tester – Aerosol Type.
    • For use with Solo 330/332 Dispensers.
    • Manufacturer approved tester for use with smoke detectors.
    • Flammable – should be stored under room temperature.
    • Non-toxic & Silicone-free to prevent detector contamination.
    • 250ml Volume Capacity – For use with 330 Dispensers.
    • Ex-stock with same day delivery.
    • Contact us for more information.
  • Sale!

    Solo A7 Detector Duster

    • Solo A7 Detector Duster.
    • Pressure can to clean contaminated detectors.
    • Prevents false alarm & for fire alarm maintenance.
    • Removes most dust and dirt from detector chamber.
    • Volume: 250ml of Clean Gas Canister.
    • Non-flammable & simple to use.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
  • Sale!

    Solo C3 Carbon Monoxide Detector Tester

    • Solo C3 Carbon monoxide Detector Tester.
    • For use in carparks & CO Fixed Gas Detectors.
    • Immediate & fast action.
    • Used to detect response from CO Detectors.
    • Can be used with Solo 330 Dispenser.
    • Ex-stock for same day delivery.
    • Contact us for more information.
  • Solo ES3 Smoke Catridges

    • Solo ES3 Smoke Cartridges.
    • Detector capable Smoke for Wide Range of Detectors.
    • Non-flammable, non-pressurized & non-hazardous.
    • Instant detector activation.
    • Compact design.
    • Ex-stock with same-day delivery.
    • Contact us for more information.
  • Crowcon Gasman Portable Gas Detector

    T4 – Portable Gas Detector

    • Crowcon T4 – Multi Gas Portable Detector
    • Can be used to detect CO, H2S, Flammable & Oxygen.
    • Intuitive Menu System & Large Buttons.
    • Detection of most common gas hazards in enclosed spaces.
    • IP 65 & IP 67 rated – to prevent dust & water ingress.
    • 18 Hour Battery – For Prolonged Use.
    • Ensure regular bump test & calibration.
    • Contact us for more information.
  • Thermal Imaging Camera

    • Thermal Imaging Camera by Drager.
    • Other brands available on request.
    • One hand easy to use operation.
    • Intrinsically Safe & Explosion Proof.
    • IR Window with Laser Pointer.
    • Snapshot button for recording.
    • Water, dust & heat resistant.
    • USB Interface & Charging Pads.
    • Rechargeable lithium-ion battery.
    • Contact us for more information.
  • TOC-750 Fixed Gas Detector

    • IGD TOC-750 Addressable Gas Detector.
    • For Safe Area Installation Only.
    • Detection for over 400 Gases & Vapors.
    • Multiple I/O Points for Input & Output Control.
    • Enclosure: ABS Plastic in White Color.
    • Auto Swap of Sensors & Auto Changeover.
    • Addressable Detector with IGD Control Panel.
    • Contact us for more information.
  • Flammable Gas Detectors Crowcon by Crowngas Qatar

    TXgard Plus – Flameproof Detector

    • TXgard Plus – Flameproof Toxic & Oxygen Gas Detector
    • Local LCD Display for menu & magnetic key operation.
    • Explosion Proof – ATEX Certified for use in Hazardous Areas.
    • Non-Intrusive Calibration with custom Magnetic Key.
    • Added Fault & Alarm Relays – For Signaling & Alarm.
    • IP65 Protection for use in outdoors – dust & water.
    • Contact us for more information.
  • UV/IR Flame Detectors

    • UV/IR Flame Detectors – Ultraviolet / Infrared.
    • Available for Safe Area & Explosion Proof Area.
    • QCD (Qatar Civil Defense) Approved for Fire Alarm.
    • Enclosure Options: Aluminium,  Alloy, Stainless Steel.
    • FOV & Range: 100° Coverage Angle & 30m Coverage.
    • Operating Voltage: 24Vdc (17Vdc to 32 Vdc).
    • Relay Outputs for Fire, Fault & Warning Alarm.
    • 4-20mA Analog Signal Output / Conventional.
    • Mounting Brackets, Air Shield & Sun Shield.
    • Contact us for more information with requirements.
  • Vesda Xtralis

    • Vesda Xtralis – Aspirating Smoke Detector.
    • Vesda-E VES has four programmable alarms.
    • Available in Single Pipe or Four Pipe Options.
    • Sector addressing based on sectors & zones with tagging.
    • Flair Detection technology delivers reliable early warning.
    • Multi-stage filtration & optical protection with clean air.
    • ASD & HSSD coming with LCD Display and non-LCD.
    • Available Variants: Vesda-E VEA, Vesda-E VEP,  Vesda-E VEU, VSP, VLP, VLS, VLC & VLF Filter, Vesda VRT-200, LaserSCANNER, Vesda LaserCOMPACT Marine, Vesda Sensepoint XCL, Vesda LaserCOMPACT Explosion Proof, Vesda Xtralis VLI LaserINDUSTRIAL Detector, Vesda-E VPS, Vesda VLF-250 LaserFOCUS, Vesda VLS-304 LaserSCANNER, Vesda Xtralis Power Supply Unit, Clips, Pipes, Test Points & Other Field Accessories.
    • Available Tubes, Clamps, Pipes, Filters, Power Supply & Accessories.
    • Contact us for more information.