QCD

Qatar Civil Defense Approved Fire Equipment’s & Devices – Fire Fighting Systems – Contact us for enquiries – Trading & Supply Only

Showing all 50 results

  • Apollo 55000-005 XP95 Red Sounder Beacon

    • Apollo XP95 Open-Area Sounder Beacon VID.
    • Built-in Short Circuit Isolator and IP65 Protection.
    • Self-test fault monitoring & tony changing.
    • Field adjustable alarm volume settings.
    • Individual and Group Addressing.
    • For use with Apollo XP95 & Discovery Loops.
    • Ex-stock and QCDD Approved.
    View ProductDone

  • Apollo 55000-273 Beam Smoke Detector

    • Apollo 55000-273 Reflective Beam Smoke Detector.
    • Compatible with Discovery & XP95 Protocols.
    • Built-in short circuit isolator & drift compensation.
    • Auto reset based on alarm or fault condition.
    • Ex-stock & QCDD Approved.
    View ProductDone

  • Apollo 55000-863USA XP95A Relay Output Module

    • Apollo 55000-863USA XP95A Relay Output Module.
    • XP95A Relay Output Module is a Loop Powered Device.
    • White Polycarbonate enclosure with DIP Switches.
    • Ex-stock & QCDD Approved.
    View ProductDone

  • Apollo 55200-003APO Waterproof MCP

    • Apollo Conventional Waterproof MCP 55200-003APO.
    • Resettable element for testing & verification.
    • Easy access & front reset mechanism.
    • Ex-stock & QCDD Approved.
    View ProductDone

  • Apollo 58000-005APO Discovery Sounder Beacon

    • Apollo Discovery Open-Area Sounder Beacon VID.
    • Red Flash & Red Body with a 1Hz flash rate.
    • For use with Addressable Discovery Protocol.
    • Ex-stock and QCDD Approved.
    View ProductDone

  • Apollo Fire Alarm System

    • Apollo Fire Alarm System
    • Supply – Orbis, Discovery, XP95, Series65, Series65A & Xpander
    • Smoke Detectors, Heat Detectors & Manual Call Point – Conventional
    • Smoke Detectors, Heat Detectors & Manual Call Point – Addressable
    • Smoke Detectors, Heat Detectors & MCP – Addressable – SIL 2
    • SIL 2 Devices for use in Hazardous Areas & Explosive Atmospheres
    • QCD Approved.
    View ProductDone

  • Apollo Integrated Base Sounder with Isolator

    • Apollo Integrated Base Sounder 45681-300APO.
    • Integrated base sounder is line powered.
    • Built-in integrated addressing for the device.
    • Support for XP95, Discovery & CoreProtocol.
    • Support for Two Tones, 55-75dBA & 75-91dBa.
    • Ex-stock & QCDD Approved.
    View ProductDone

  • Apollo SA4700-300APO DIN-Rail Switch Monitor Module

    • Apollo SA4700-300APO Switch Monitor Module.
    • Intelligent DIN-Rail Monitoring Poles.
    • Compatible with XP95, Discovery & CoreProtocol.
    • Built-in Controllable Isolator & Pre-configured modes.
    • Earth fault monitoring and address range from 1 – 254.
    • Ex-stock and QCDD Approved.
    View ProductDone

  • Apollo XP95 Mains Switching Input / Output Unit

    • Apollo 55000-875APO Addressable Unit.
    • Mains Switching Input/Output unit.
    • Voltage free single pole change-over relay.
    • Monitored switch input built in.
    • Three visible LED’s & supervision.
    • Capable of switching 250Vac up-to 5A.
    • Ex-stock and QCDD Approved.
    View ProductDone

  • Apollo XP95 Zone Monitor Module

    • Apollo 55000-845APO XP95 Zone Monitor Module.
    • Built with bi-directional short circuit isolator.
    • Not affected by short circuits in loops.
    • Two LED’s – one red and one yellow.
    • Ex-stock & QCDD Approved.
    View ProductDone

  • C-Tec – Fire Alarm System

    • C-Tec CFP 2-8 Zone Fire Panels
    • C-Tec FP/MFP 1-28 Zone Fire Panels
    • C-Tec AlarmSense Optical Smoke Detector
    • C-Tec AlarmSense Optical Heat Detector
    • C-Tec AlarmSense Manual Call Point
    • C-Tec AlarmSense Open Area Sounder
    • C-Tec ActiV Smoke & Heat Detectors
    • C-Tec XFP Addressable Fire Panel
    • QCD Approved – Supply & Trading Only.
    • Contact us for more information.
    View ProductDone

  • C-TEC Addressable Base VAD Sounder

    • C-TEC BF456A/CX/W Addressable VAD Sounder.
    • Compatible with C-TEC XFP/ZFP, XP95/Discovery FA.
    • Ceiling mounted with stacked sounder/VAD/Detector.
    • Includes BF431QCP Quick Connect Plate & Spur Wires.
    • Built-in short-circuit loop isolator with 7 volume levels.
    • Field adjustable tone settings & group addressing.
    • Ex-stock & QCDD Approved.
    View ProductDone

  • Context Plus Conventional Manual Call Point

    • Context Plus MCP1A-525IMC Conventional MCP.
    • LPCB & VDS Approved for use with Fire Alarm.
    • No Break Resettable Conventional MCP.
    • Red Color made with PC/ABS Plastic.
    • Ex-stock & QCDD Approved.
    View ProductDone

  • Cooper – Fire Alarm System & Accessories

    • Cooper – Fire Alarm System – Addressable & Conventional Detectors.
    • Eaton Cooper – BiWire – Two-wire Detector range.
    • Eaton Cooper – Optical, Photo-thermal & heat detectors.
    • Eaton Cooper – Remote Indicator for Conventional Fire.
    • Eaton Cooper – CF1000 Addressable Fire Alarm System.
    • Eaton Cooper – CF2000 Addressable Fire Alarm System.
    • Eaton Cooper – CF3000 Addressable Fire Alarm System.
    • Eaton Cooper – Active or Passive Repeater Panels.
    • Contact us for more information.
    View ProductDone

  • Demco Motorized Alarm Bell

    • Demco Motorized Alarm Bell.
    • Part No: D-122-6
    • 6″ Dome size in red color.
    • IP 65 Rated for Weatherproof Installation.
    • Interchangeable base and zero standby current.
    • Loud and clean ringing sound with low current.
    • 95dB Rating for a distance of 3m / 10 ft.
    • Ex-stock & QCDD Approved.
    View ProductDone

  • Emergency Light

    • Emergency Light.
    • Low Heat & Low Maintenance
    • Low Power as per regulations.
    • 3 Hours Duration – Backup.
    • Nickel Cadmium Battery.
    • Wall or Ceiling Mount.
    • QCD Certified.
    View ProductDone

  • Fire Alarm Spares & Parts

    • Fire Alarm Spares available for most brands.
    • Gent, Simplex, C-Tec, Apollo, Hochiki, Edwards EST, Notifier & Siemens, Tyco & More.
    • Smoke Detectors, Heat Detectors, PSU Spare, Network Cards, Loop Cards, Control Card, Obscuration Test Card Set, Input/Output Card, FO Network Card, MCP Spare Glasses, Test Key, BACnet Gateway Assembly, Main Control Card, Display, Loop Interface Card, Mains Powered Interface Card, BACnet Gateway Assembly, Legacy Cards (For Old Systems), MCC Control Card, Network Node Card.
    • Addressing Tool for Addressable Systems.
    View ProductDone

  • Fire Blanket

    • Fire Blanket.
    • Made using Glass Fiber.
    • Box Version Available.
    • QCD Approved.
    View ProductDone

  • Fire Extinguisher

    • ABC Dry Powder Fire Extinguisher.
    • High grade Brass Valve with Rubber Hose.
    • 6kg Capacity – Other Volumes Available.
    • Simple Operation with Safety Pin.
    • Red Enclosure with Steel Body.
    • QCD Approved.
    View ProductDone

  • Flame Detector

    • Sense-ware Flame Detector
    • Available Variants: UV, IR, UV/IR.
    • Enclosure: GRP (Glass Reinforced Polymer), Corrosion Proof.
    • Explosion Proof – For installation in Zone 2 & Safe Areas.
    • Analog Output: 4-20mA Signals for PLC Integration.
    • Relay Output: For Fire Alarm Panel Integration.
    • Designed to detect all Hydrocarbon & Hydrogen fires.
    • QCD Approved – For Integration with Fire Alarm Systems.
    • Range: 23m with <10s Response Time for quick response.
    • LED Indicators: Green LED, Yellow LED & Red LED.
    • IP 65 Protection to prevent dust & water ingress.
    • Available with Swivel Mount for field angle mounting.
    • Test Lamp – For Testing & Maintenance of Detector.
    • Contact us for more information.
    View ProductDone

  • Flashni – Sounder/Beacon

    • Flashni – Sounder/Beacon – Outdoor Unit
    • IP 65 Rated – Deep Base
    • Audio Visual Warning & Alarm
    • Flashni – Combination of Roshni & Xenon Beacon
    • High Sound Output & Visual Output
    • Polycarbonate Lens & ABS Base
    • QCD Approved.
    View ProductDone

  • FP200 – Fire Resistant Cable

    • FP200 Standard Fire-Resistant Cable
    • QCD Certified
    • 2C, 3C or 4C Cable
    View ProductDone

  • GENT – Fire Alarm System & Accessories

    • Honeywell Gent – Fire Alarm System – Addressable Detectors.
    • Gent Optical Detector (S4-715) c/w Base (S4-700)
    • Gent Sounder (S3-S-R S3)
    • Gent Heat Detector (S4-720) c/2 Base (S4-700)
    • Gent MCP (RF-805) c/w Resettable Element
    • Gent S4 Heat Detector with Sounder (S4-780-S)
    • Gent S3 – Red Body Sounder & Visual (S3-S-VAD-HPR-R)
    • Gent Beam Sensor Transmitter (S4-34741)
    • Gent Beam Sensor Receiver (S4-34742)
    • Gent Sounder Beacon (CWSS-RR-S5)
    • Gent Vigilon Control Panel System
    View ProductDone

  • GST – Fire Alarm System & Accessories

    • EST Conventional Fire Panel System
    • Available in 2 Zone / 4 Zone / 8 Zone / 16 Zone Conventional Fire Alarm Panel
    • GST Photoelectric Smoke Detector
    • GST Heat Detector
    • GST Manual Call Point
    • GST Sounder Flasher – Clear Lens (Indoor)
    • GST Sounder Flasher – Weatherproof – Red Lens – IP65
    • QCD Approved – Supply & Trading Only.
    • Contact us for more information.
    View ProductDone

  • Heat Detector Tester

    • Solo Heat Detector Tester in Qatar.
    • Solo 460 – Cordless Heat Detector Tester Head.
    • Solo 461 – Cordless Heat Detector Tester Kit.
    • Solo 424 – Mains Powered Heat Detector Tester.
    • Ex-stock subject to prior sales.
    View ProductDone

  • Jactone JT510 Fire Blankets

    • Jactone JT510 Fire Blankets.
    • Part No: JT510
    • Size: 1.8m x 1.2m
    • Ex-stock & QCDD Approved.
    View ProductDone
  • Sale! Low Cost LPG Gas Detector for Fire Panel Integration by Crowngas Qatar

    LPG Detector – QCD Approved

    • Fixed LPG Gas Detector.
    • Low-cost Combustible Gas Detector.
    • For use in Kitchens & Indoors.
    • Green & Red LED Status Indicators.
    • Optional GD-2A Available with Local Buzzer.
    • Can be Directly Integrated to Fire Panel (FACP).
    • QCD Approved – For use with Fire Alarm System.
    • Contact us for more information.
    View ProductDone

  • MEDC – Break Glass – Manual Call Point

    • MEDC Break Glass Manual Call Point
    • For use in Hazardous Areas
    • SIL 2 Certified
    • Available in GRP Enclosure, LM35 Aluminium or SS 316
    • Optional LED Indicator & Lift Flap
    • In-line & end of line resistors.
    • SS Screws for fixing
    • IP 66, IP 67, IP 68 Rated
    • Key operated Test Facility
    • Contact for more information.
    View ProductDone

  • MEDC – Pushbutton – Manual Call Point

    • MEDC Pushbutton designed for use in Hazardous Area & Explosive Atmospheres
    • SIL 2 Certified, Intrinsically Safe & Flameproof
    • Enclosure in GRP, LM35 High Grade Aluminium Alloy or SS 316
    • IP 66, IP 67 & IP 68 Rated
    • Lift Flap
    • Optional LED Indicator & In line, EOL Resistor
    • Standard Latching
    • Contact for more information
    View ProductDone

  • Notifier – Fire Alarm – Smoke & Heat Detectors – Modules

    • Notifier Fire Alarm System by Honeywell
    • Notifier FSP-851 Addressable Photoelectric Smoke Detector
    • Notifier FST-851 Addressable Heat Detector
    • Notifier Addressable Manual Call Point
    • Notifier FMM-1 Addressable Monitor Module
    • Notifier FRM-1 Addressable Relay Module
    • Notifier FCM-1 Addressable Control Module
    • Notifier FZM-1 Zone Interface Monitor Module
    • QCD Approved – Supply & Trading Only.
    • Contact us for more information.
    View ProductDone

  • Notifier FRM-1 Relay Control Module

    • Notifier FRM-1 Addressable Control Relay Module.
    • Dry contact output for activating auxiliary devices.
    • Relay contains two sets of DPDT Switch contacts.
    • Integral LED “blinks” green for communication.
    • Integral LED turns red when activated or switched.
    • High noise immunity to EMF/RFI & Wide LED view.
    • Ex-stock for use with Notifier Fire Alarm Systems.
    View ProductDone

  • Patol – Aspirating Smoke Detector (ASD & HSSD)

    • Patol Securiton – Aspirating Smoke Detector
    • Support for 1 Detector, 2 & 3.
    • Available in Normal Sensitivity & High Sensitivity.
    • Support for up-to 5 Alarms (3 Pre-Alarms & 2 Alarms)
    • 1 or 2 Sampling Lines with Separate Detectors & Air flow Monitors.
    • Certified calculation software & pipe flow for accurate layout.
    • Low power consumption & high-power suction.
    • Replaceable components & spares.
    • Sampling Pipes – PVC, ABS, Copper & Stainless Steel.
    • Flex Hose for use in concrete and flexible installation.
    • Capillary tubes (for use in false ceilings).
    • Available Dust filters, trap boxes & water retaining boxes.
    • Air cooler/heater as per temperature & relative humidity.
    • Auxiliary housing & flame arresters for Explosion Proof Application.
    • Contact us for more information.
    View ProductDone

  • Siemens – Fire Alarm – Smoke & Heat Detectors – Modules

    • Siemens Fire Alarm System – Smoke & Heat Detectors & Modules
    • Siemens HFP-11 Addressable Smoke Detector
    • Siemens HFPT-11 Addressable Heat Detector
    • Siemens OP921 Addressable Photoelectric Smoke Detector
    • Siemens HMS-S Addressable MCP – Pull Station
    • Siemens HTRI-D Dual Input Interface Module
    • Siemens HTRI-S Single Input Module
    • Siemens Sounder Strobe
    • QCD Approved – Supply & Trading Only.
    • Contact us for more information.
    View ProductDone

  • Simplex – Fire Alarm System & Accessories

    • Simplex Addressable Fire Alarm Control Panel
    • Simplex Addressable Heat Detector
    • Simplex Addressable Smoke Detector
    • Simplex Conventional Horn Strobe – Sounder Flasher
    • Simplex Addressable Relay Module
    • Simplex Addressable Manual Call Point – Pull Station
    • QCD Approved – Supply & Trading Only.
    • Contact us for more information.
    View ProductDone

  • Smoke Detector Tester

    • Smoke Detector Tester in Qatar.
    • Solo A5 – Aerosol Based for Manual Smoke Testing.
    • Solo A10 – HFC-Free Manual Smoke Detector Tester.
    • Solo A10S – HFC-Free Smoke Detector for Solo 330.
    • Solo 330 – Hand-held dispenser to use with Solo A5 & A10S.
    • Solo A7 – Detector Duster for Cleaning Detectors from residue.
    • Ex-stock subject to prior sales.
    View ProductDone

  • Solex – Xenon Fire Alarm Beacon

    • Solex Fulleon – Xenon Fire Alarm Beacon
    • Available in Different Light Outputs – 2.5Cd, 10Cd & 15Cd
    • Flash Rate: 1Hz
    • IP 54 & IP 65 Options – For Indoors & Outdoors
    • Power: 24Vdc & 110Vac
    • Enclosure: ABS with Polycarbonate Lens
    • Available in Different Light Colour
    • Base: Red or White
    • QCD Approved.
    View ProductDone

  • Solo 100 Telescopic Access Poles

    • Solo 100 Telescopic Access Poles.
    • Extension from 1.26m to 4.5m (6m total).
    • Made from strengthened durable fiberglass.
    • Lightweight and portable tester poles.
    • Non-conductive material for risk free use.
    • “TotalLock” system ensures sections never lock.
    • Increase Height using Solo 101 for max. height of 9m.
    • Designed for Smoke Detectors placed at tall ceiling.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone

  • Solo 200 Detector Removal Tool

    • Solo 200 Detector Removal Tool.
    • Universal Detector Removal Tool.
    • Remove Smoke & Heat Detectors with ease.
    • Ideal for removal of most types of detectors.
    • Enables removal & replacement of detectors.
    • Adjustable for different sizes of detectors.
    • Color coded for different sizes of detectors.
    • Universal joint so tool never bends when in use.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone
  • Sale!

    Solo 330 Aerosol Smoke & CO Dispenser

    • Solo 330 Aerosol Smoke & CO Dispenser.
    • QCD Approved for use with all detectors.
    • Quick & strong for aerosol delivery.
    • Transparent cup to view detector LED.
    • Use at variety of heights and angles.
    • Suitable for detectors up-to 177mm in diameter.
    • Height adjusting accessories & poles.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone

  • Solo 365 Smoke Detector Tester

    • Solo 365 Smoke Detector Tester
    • ‘Auto-start’ proximity sensor – faster testing, less smoke waste
    • Auto-LED torch – allows simple testing of detectors in dark areas
    • Slim-line design – easier access to detectors in confined spaces
    • Clearing mode – eliminates re-alarms, increasing productivity
    • Delayed start mode – for non-standard detectors and ASD systems
    • Included – 1 x Solo 365 Head Unit, 1 x Solo 370 Lithium-Ion Battery Pack, 1 x Solo 371 Smoke Generator, 1 x Solo ES3 Smoke Cartridge, 1 x Spare 1060 Charger & USB Lead
    • Additional Accessories Available – Multi Height Testers.
    • Contact us for more information.
    View ProductDone

  • Solo 461 Cordless Heat Detector Tester

    • Solo 461 Wireless Heat Detector Tester.
    • Industry-standard for testing heat detector.
    • Battery-powered c/w charger.
    • Immediate & fast activation.
    • Can be used for Fixed Temperature Heat Detector.
    • Can be used for Rate-of-rise Heat Detector.
    • Can be used for Multi-sensor or Combination Detector,
    • Two separate battery batons for continued use.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone
  • Sale!

    Solo 461 Heat Detector Tester Kit

    • Solo 461 Heat Detector Tester Kit.
    • Battery powered heat detector tester kit.
    • Can be connected to Solo Access poles to reach up-to 9 metres.
    • Heat is focused directly into the detector sensor for fast testing.
    • Can trigger majority of spot & point heat detectors into alarm.
    • Powered by battery baton fitted within the pole for cordless use.
    • Transparent cup for clear view of detector LED & activation.
    • Automatically goes into standby after 120s for protection.
    • Switches off completely after 5 minutes in standby.
    • Provided with 1x battery baton and 240V fast charger.
    • 3000mAh battery ensures longer testing per charge.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone
  • Sale!

    Solo A3 Smoke Detector Test Gas

    • Solo A3 Smoke Detector Test Can.
    • Hand-held Test Gas Can – Fast Results.
    • Delivers Smoke to Detector immediately.
    • Standard Product to Test Smoke Detectors.
    • UL Certified for use with Fire Alarm Testing.
    • Contact us for more information.

    Solo A3 is obsolete as of 2016, kindly use Solo A5.

    Solo A5 Smoke Detector Tester

    View ProductDone
  • Sale!

    Solo A5 Smoke Detector Tester

    • Solo A5 Smoke Detector Tester – Aerosol Type.
    • For use with Solo 330/332 Dispensers.
    • Manufacturer approved tester for use with smoke detectors.
    • Flammable – should be stored under room temperature.
    • Non-toxic & Silicone-free to prevent detector contamination.
    • 250ml Volume Capacity – For use with 330 Dispensers.
    • Ex-stock with same day delivery.
    • Contact us for more information.
    View ProductDone
  • Sale!

    Solo A7 Detector Duster

    • Solo A7 Detector Duster.
    • Pressure can to clean contaminated detectors.
    • Prevents false alarm & for fire alarm maintenance.
    • Removes most dust and dirt from detector chamber.
    • Volume: 250ml of Clean Gas Canister.
    • Non-flammable & simple to use.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone
  • Sale!

    Solo C3 Carbon Monoxide Detector Tester

    • Solo C3 Carbon monoxide Detector Tester.
    • For use in carparks & CO Fixed Gas Detectors.
    • Immediate & fast action.
    • Used to detect response from CO Detectors.
    • Can be used with Solo 330 Dispenser.
    • Ex-stock for same day delivery.
    • Contact us for more information.
    View ProductDone

  • Solo Smoke and Heat Detector Tester and Removal Kit

    • Solo Smoke and Heat Detector Tester and Removal Kit.
    • Extension Pole can reach up-to 6m in height (4.5m).
    • Combined Travel Kit c/w Bag for Easy Use.

    Kit includes:

    • 1x Solo 330 – Aerosol Dispenser (Insert Solo A5)
    • 1x Solo A5   – Smoke Aerosol Canister (250ml)
    • 1x Solo 461 – Cordless Heat Detector Tester.
    • 1x Solo 100 – 4.5m Telescopic Access Poles.
    • 1x Solo 200 – Detector Removal Tool.
    • 1x Solo 610 – Protective Storage Bag.
    View ProductDone

  • UV/IR Flame Detectors

    • UV/IR Flame Detectors – Ultraviolet / Infrared.
    • Available for Safe Area & Explosion Proof Area.
    • QCD (Qatar Civil Defense) Approved for Fire Alarm.
    • Enclosure Options: Aluminium,  Alloy, Stainless Steel.
    • FOV & Range: 100° Coverage Angle & 30m Coverage.
    • Operating Voltage: 24Vdc (17Vdc to 32 Vdc).
    • Relay Outputs for Fire, Fault & Warning Alarm.
    • 4-20mA Analog Signal Output / Conventional.
    • Mounting Brackets, Air Shield & Sun Shield.
    • Contact us for more information with requirements.
    View ProductDone

  • Vesda Xtralis

    • Vesda Xtralis – Aspirating Smoke Detector.
    • Vesda-E VES has four programmable alarms.
    • Available in Single Pipe or Four Pipe Options.
    • Sector addressing based on sectors & zones with tagging.
    • Flair Detection technology delivers reliable early warning.
    • Multi-stage filtration & optical protection with clean air.
    • ASD & HSSD coming with LCD Display and non-LCD.
    • Available Variants: Vesda-E VEA, Vesda-E VEP,  Vesda-E VEU, VSP, VLP, VLS, VLC & VLF Filter, Vesda VRT-200, LaserSCANNER, Vesda LaserCOMPACT Marine, Vesda Sensepoint XCL, Vesda LaserCOMPACT Explosion Proof, Vesda Xtralis VLI LaserINDUSTRIAL Detector, Vesda-E VPS, Vesda VLF-250 LaserFOCUS, Vesda VLS-304 LaserSCANNER, Vesda Xtralis Power Supply Unit, Clips, Pipes, Test Points & Other Field Accessories.
    • Available Tubes, Clamps, Pipes, Filters, Power Supply & Accessories.
    • Contact us for more information.
    View ProductDone

  • Wheelock Exceder

    • Wheelock Exceder Audio Visual / Horn / Strobe Unit.
    • Field selectable light output settings – for wall & ceiling.
    • UL & FM Approved for Fire Alarm System.
    • Ex-stock & QCDD Approved.
    View ProductDone