Fire Alarm System

QCD Approved Fire & Smoke Detection Systems – Supply & Trading Only

Showing all 37 results

  • Apollo Fire Alarm System

    • Apollo Fire Alarm System
    • Supply – Orbis, Discovery, XP95, Series65, Series65A & Xpander
    • Smoke Detectors, Heat Detectors & Manual Call Point – Conventional
    • Smoke Detectors, Heat Detectors & Manual Call Point – Addressable
    • Smoke Detectors, Heat Detectors & MCP – Addressable – SIL 2
    • SIL 2 Devices for use in Hazardous Areas & Explosive Atmospheres
    • QCD Approved.
    View ProductDone

  • Apollo Orbis Conventional Detectors

    • Apollo Orbis Conventional Detectors – Fire Alarm Devices.
    • Orbis Conventional – For Safe Area & Commercial spaces.
    • Orbis Marine – For use in boats, ships & offshore vessels.
    • Orbis Intrinsically Safe – Hazardous classified areas (ATEX).
    • Apollo Orbis Detector Series: ORB-HT, ORB-OP & ORB-OH.
    • For direct integration into conventional fire alarm system.
    • Intrinsically safe devices to be used with galvanic isolator.
    • Smoke Detector, Heat Detector & Multi-sensor detector.
    • Optional mounting kits for easy, fast & direct installation.
    • Optional relay bases available with dry contacts for alarm.
    • Suitable for use in offshore, evacuation shelters & spaces.
    • Industry standard for fire alarm with global approvals.
    • QCD Approved for integration to fire alarm systems.
    • Contact us for more information.
    View ProductDone

  • Baldwin Boxall Emergency Voice Communication System

    • Baldwin Boxall – Emergency Voice Communication Control Panel.
    • Radial Wired Emergency Voice Communication System.
    • Battery backed (24 hours quiescent & 3 hours functional)
    • Networkable – Networked panels are wired in a loop.
    • Remote units are wired in star configuration.
    • Fully Duplex – Firefighter & Emergency Telephone.
    • Integrate to local fire panel with C2CFPE Interface Module.
    • Outstations & Network Panel – For Expansion.
    • Toilet Alarm & Integration along with accessories.
    • Contact us for more information.
    View ProductDone
  • CO Gas Detector Macurco Make by Crowngas Qatar

    Carbonmonoxide (CO) Detector – QCD Approved

    • Carbon monoxide CO Gas Detector.
    • For use in kitchens & indoors – Safe Area Installation.
    • Local Alarm Buzzer & Relay Output – Alarm & Trouble.
    • LED Status Indicator – Red, Amber & Green LED’s.
    • Integrate directly into the Fire Alarm System.
    • QCD Approved – For use with Fire Alarm Panel.
    • Contact us for more information.
    View ProductDone

  • Conventional Flame Detector

    • Conventional Flame Detector for Safe Area.
    • Flame Detecting Principle: UV/IR.
    • Enclosure: Metallic Type, Aluminium Alloy.
    • FOV & Range: 90° Coverage Angle & 30m.
    • Operating Voltage: 24Vdc (17Vdc to 32 Vdc).
    • Relay Outputs for Fire, Fault & Warning Alarm.
    • 4-20mA Analog Signal Output / Conventional.
    • QCDD Approved for Fire Panel Integration.
    • Aluminium Mounting Bracket for 360° installation.
    • Bracket: Stainless Steel Alloy (SUS316).
    • Optional: Sun shield & Rain Shield Accessories.
    • Contact us for more information.

    Flame Detector is suitable for Indoor & Outdoor Area’s with several installation across Qatar. Contact us for more information & technical support.

    View ProductDone

  • Explosion Proof Beacons

    • Explosion Proof Beacons – Hazardous Area Rated – Safety & Telecom.
    • Beacons available in Xenon Lamp or LED Type for High Light Output.
    • Enclosure: GRP, Marine Grade Alloy or Stainless Steel 316L (SS 316L).
    • Beacons are available in strobe, rotating, flashing & steady configuration.
    • High Temperature Units as per indoor or outdoor installation & mounting.
    • Marine listed for vessel and offshore applications in saline environments.
    • SIL 1 and SIL 2 Safety Level Rated Beacons – Ensure Safe Operation.
    • Zone 1 & Zone 2 Hazardous Area rated for fire alarm & visual signaling.
    • Eaton MEDC: MEDC XB15, MEDC XB9, MEDC XB8, MEDC XB4, MEDC XB13, MEDC XB12, MEDC TH12, MEDC XB87LED, MEDC SM87HXB, MEDC LD15 – Eaton Crouse Hinds Rated Explosion Proof Xenon and LED Beacons.
    • E2S: E2S D1xB2, E2S GNExB2, E2S STExB2, E2S BExBG, E2S D1xB2, E2S GNExB2, E2S STExB2, E2S GNExB1, E2S BExBG, E2S D2xB1, E2S E2xB, E2S IS-L101L LED Beacon, E2S STExB2 Rotating Beacon – E2S Visual Signals.
    • Federal Signal: G-STR Strobe Beacon, 154XSTHI, 224XTSHI, FB245THI.
    • Units available with QCD (Qatar Civil Defense) Approvals for Fire Alarm.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Beam Detector

    • Explosion Proof Beam Detector – Optical Smoke.
    • Fireray 3000 Explosion Proof & Flameproof Unit.
    • Unit certified for use in Zone 2 Hazardous Areas.
    • Working involves a transmitter head and receiver.
    • Range is between 10-80 meters between detectors.
    • Enclosure: Copper free Aluminium Alloy LM25, Red.
    • Optional controller for power, signal & alarm – Fire.
    • Controller supports up-to 2 sets of detectors/receiver.
    • Integrated Laser Alignment in Receiver Unit as required.
    • Fire & Fault Relay Contacts in Optical Beam Detector.
    • QCD Approved for use with Fire Alarm Systems.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Break Glass Manual Call Point

    • Explosion Proof Break Glass MCP – Manual Call Point.
    • Conventional Type Break Glass MCP for Hazardous Areas.
    • MCP used to raise alarm during fire, gas release or doors.
    • Enclosure: UV Resistant Glass Reinforced Polyester (GRP).
    • IP Rating: IP66 / IP67 Weatherproof and dust resistant.
    • Color: Red (standard), black, blue or as per choice/demand.
    • Optional: Red LED to indicate activation/operation/testing.
    • Lift flap and corrosion resistant models with custom labels.
    • SIL 2 Certification for Functional Integrity of Fire Alarm System.
    • QCD Approved – Qatar Civil Defense approved models available.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Flame Detector

    • Explosion Proof Flame Detector.
    • Flame Detecting Principle: UV/IR.
    • Enclosure: Metallic Type, Aluminium 6061.
    • FOV & Range: 100° Coverage Angle & 30m.
    • Operating Voltage: 24Vdc (17Vdc to 32 Vdc).
    • Relay Outputs for Fire, Fault & Warning Alarm.
    • 4-20mA Analog Signal Output / Conventional.
    • QCDD Approved for Fire Panel Integration.
    • Aluminium Mounting Bracket for 360° installation.
    • Optional: Sun shield & Air shield Accessories.
    • Contact us for more information.

    Flame Detector is suitable for Woqod LPG Storage Tank Flame Detection in Outdoor Area’s with several installation across Qatar. Contact us for more information & technical support.

    View ProductDone

  • Explosion Proof Heat Detector

    • Explosion Proof Heat Detector.
    • Rated Compensated Heat Detector Elements.
    • MEDC HD1 Heat Detector Range – For Hazardous Areas.
    • E2S D1xH1, D2xH1, GNExH1, STExH1 Heat Detectors.
    • ATEX & IECEx – Explosion Proof Certifications Available.
    • Optional red led indicator for heat detector activation signal.
    • Temperature Options: Range 60°C – 385°C with optional guard.
    • Enclosure: Marine Grade LM6 Aluminium, GRP or 316L SS.
    • IP66/67 Ingress Protection with corrosion proof junction box.
    • Enclosure Color: Red or Grey (Custom Colors available on demand).
    • Multi-angle wall or ceiling bracket available for mounting.
    • Optional Integration with wide range of addressable module.
    • Certified for use in extremely harsh and hazardous environments.
    • Optional EOL Module or Series Module with resistor/diode/zener.
    • Entry Ports: M20, 1/2″ NPT, 3/4″ NPT entries based on mounting.
    • Operating Temperature: -50° to +105°C for use in extreme temperature.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Pull Stations

    • Explosion Proof Pull Stations – Pull Handle Type.
    • Conventional Type Pull Station Call Point for Hazardous Areas.
    • Ideal for use in extreme weather and corrosive environments.
    • Pull Station available in two types – lift & pull or push & pull.
    • IP Rating: NEMA Type 4X & IP66/67 Weatherproof Protection.
    • Color: Standard Red, Optional Blue, Yellow or Custom Colors.
    • Enclosure: Cast Aluminium or Glass Reinforced Polyester (GRP).
    • SIL 2 Compliant to maintain functional integrity of fire alarm system.
    • Entries: 3/4″ NPT, 1/2″ NPT or Standard M20 Entries with Adaptors.
    • Custom Labels, tags & equipment tags in stainless steel plates.
    • Optional Accessories: Pole Mount Bracket Kit or Sunshade Kits.
    • QCD Approved – Qatar Civil Defense approved models available.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Smoke Detector

    • Explosion Proof Smoke Detector.
    • Photoelectric Type Smoke Detector for use in Hazardous Area.
    • ATEX & IECEx – Explosion Proof Certifications Available.
    • Built-in red led indicator is activated in the presence of smoke.
    • Built-in 4-20mA Analog Signal Output for PLC / DCS / Scada.
    • Built-in Relays for Smoke Alarm, Fault Alarm & Auxiliary Output.
    • IP44 Ingress Protection – Suitable for Indoor / Humid / Moisture.
    • Sensor module is intrinsically safe (I.S) & hot-swappable in field.
    • Enclosure: ABS Plastic Smoke Detector in Aluminium Junction Box.
    • Entry Ports: Standard 3/4″ NPT or M25 with 1/2/3/4 Port Configuration.
    • Operating Temperature: -20°C to +65°C for use in extreme temperature.
    • Optional Duct Mount Kit and Parts for Smoke Detection in HVAC Ducts.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Sounder Beacon Units

    • Explosion Proof Sounder Beacon Units – Combination AV.
    • Integrated Audio-Visual Units for Hazardous Areas Signaling.
    • ATEX Certified for use in Harsh Explosive Atmospheres.
    • Combination units can be used for telephone signaling.
    • Beacons are of xenon strobe type with 21 Joule output.
    • Integrated sounders have a maximum sound of 125dbA.
    • Enclosure: GRP, LM6 Aluminium, 316 Stainless Steel type.
    • Intrinsically safe units are available for use with IS Barrier.
    • Units are corrosion proof with an IP 66 / 67 protection.
    • Custom fixture lights are available for Fire, Gas & Sounder.
    • Signaling lights with custom colors and SS nameplates.
    • Option: Factory Certified Units or Custom Configured.
    • Available MEDC: MEDC CU1, CU1S, CU1SP, CU1H, CU1HP.
    • Available E2S: BExCS, D1xC, STExC, IS-mC1, D2xC2, D2xC1, E2xC1.
    • QCD Certified units are available for use with fire alarm.
    • Contact us for more information.
    View ProductDone

  • Federal Signal Beacon

    • Federal Signal Beacon.
    • Available in 24Vdc & 120-240Vac Options.
    • Enclosure: Glass Reinforced Polyester (GRP).
    • Dome guard included with LED Beacon.
    • Standard M20 Entries (optional M25 Entry).
    • Field configurable flash patterns – 60 FPM.
    • IP66 Ingress Protection Enclosure Rated.
    • IP69K Compliant for Harsh Atmospheres.
    • Zone 1 & 2 Hazardous Area Equipment.
    • QCD Approved for Fire Alarm System.
    • Contact us for more information.
    View ProductDone
  • Flame Detectors SIL 2 ATEX by Crowngas Qatar

    FGard IR3 Flame Detector

    • FGard IR3 Flame Detector
    • Detect all Hydrocarbon Fires within 60m.
    • Heated windows to prevent condensation.
    • Smart System – Doesn’t Require Testing
    • SIL 2 Approved
    • FM Approved
    • ATEX Approved for use in Hazardous Areas
    • Enclosure: Copper free Aluminium or SS
    • Output: 4-20mA, Alarm & Fault Relays
    • HART Capable
    • Optional : Pole Mount Kit, Sunshield, Mounting Bracket, Flame Simulator Test Kit
    View ProductDone

  • Flame Detection

    • Flame Detection System & Accessories.
    • Flame Detecting Principle: UV/IR.
    • Enclosure: Stainless Steel (SUS 316).
    • FOV & Range: 90° Coverage Angle & 30m.
    • Operating Voltage: 24Vdc (17Vdc to 32 Vdc).
    • Relay Outputs for Fire, Fault & Warning Alarm.
    • 4-20mA Analog Signal Output / Conventional.
    • QCDD Approved for Fire Panel Integration.
    • Aluminium Mounting Bracket for 360° installation.
    • Optional: Sun shield & Air shield Accessories.
    • Contact us for more information.

    Flame Detector is suitable for Offshore & Corrosive Environments with Saline Environments. With several installation across Qatar. Contact us for more information & technical support.

    View ProductDone

  • KAC – Manual Call Points

    • KAC – Manual Call Point
    • Variants: Break Glass, Key, Manual Reset Call Points.
    • Available in Different Colours, Messages & Image/Logo.
    • Suitable for indoor & outdoor installations with different IP ratings.
    • Built in LED for annunciation of activation/testing of system.
    • Waterproof Version Available for use in areas with water & dust ingress.
    • Extinguishing MCP, Smoke Vent, Emergency Door Release & Fire Alarm.
    • Contact us for more information on integration with your system.
    View ProductDone
  • Linear Heat Detector by Crowngas Qatar

    Linear Heat Detector (LHD)

    • Linear Heat Detector Cables – QCD Approved
    • Can be directly integrated to any FACP.
    • Available in 68°C, 88°C, 105°C, 185°C, 230°C.
    • Comes in different sheaths based on applications.
    • LHD Controller & Alarm Locator with LCD Display available.
    • QCD Approved – Direct Integration to Fire Alarm Panel.
    • Contact us for more information.
    View ProductDone
  • Sale! Low Cost LPG Gas Detector for Fire Panel Integration by Crowngas Qatar

    LPG Detector – QCD Approved

    • Fixed LPG Gas Detector.
    • Low-cost Combustible Gas Detector.
    • For use in Kitchens & Indoors.
    • Green & Red LED Status Indicators.
    • Optional GD-2A Available with Local Buzzer.
    • Can be Directly Integrated to Fire Panel (FACP).
    • QCD Approved – For use with Fire Alarm System.
    • Contact us for more information.
    View ProductDone

  • MEDC – Safe Area Xenon Beacons

    • MEDC Safe Area Xenon Beacons
    • Available in Weatherproof for Outdoor Areas – IP 65
    • High Intensity Flash
    • Enclosure: Corrosion Resistant GRP
    • Optional Lens Guard
    • Multi Lens & Enclosure Colours Available
    • Contact for more information & design.
    View ProductDone

  • Patol – Aspirating Smoke Detector (ASD & HSSD)

    • Patol Securiton – Aspirating Smoke Detector
    • Support for 1 Detector, 2 & 3.
    • Available in Normal Sensitivity & High Sensitivity.
    • Support for up-to 5 Alarms (3 Pre-Alarms & 2 Alarms)
    • 1 or 2 Sampling Lines with Separate Detectors & Air flow Monitors.
    • Certified calculation software & pipe flow for accurate layout.
    • Low power consumption & high-power suction.
    • Replaceable components & spares.
    • Sampling Pipes – PVC, ABS, Copper & Stainless Steel.
    • Flex Hose for use in concrete and flexible installation.
    • Capillary tubes (for use in false ceilings).
    • Available Dust filters, trap boxes & water retaining boxes.
    • Air cooler/heater as per temperature & relative humidity.
    • Auxiliary housing & flame arresters for Explosion Proof Application.
    • Contact us for more information.
    View ProductDone

  • Rotating Beacons

    • Federal Signal Red Rotating Beacons.
    • Rated for 24Vdc Power Supply.
    • Integrated 1/2″ NPT Pipe & Surface Mount.
    • Rated for indoor & outdoor use.
    • IP66 Ingress Protection with Nema 4X Rated.
    • IP69K Compliant – For Adverse Locations.
    • Handle high pressure sprays & temperatures.
    • QCD Approved for Fire Alarm System.
    • Contact us for more information.
    View ProductDone

  • Smoke Detector Sensitivity Tester

    • Smoke Detector Sensitivity Tester.
    • Ensure detector is calibrated for specified levels.
    • Measures detector sensitivity and feeds back info to user.
    • Unit automatically self-calibrates prior to each testing use.
    • Unit is battery Operated & suitable for most detectors.
    • Requires specialized Smoke Aerosol (Aero 400) for testing.
    • Requires a control unit with the user with main unit.
    • Testing can be conducted in levels as desired by client.
    • Ensure optimal performance of smoke detectors.
    • TruTest 801 Smoke Detector Sensitivity Test Head.
    • TruTest 800 Smoke Detector Sensitivity Test Kit (6m).
    • AERO 400 TruTest Smoke Aerosol – Precision Testing.
    • Contact us for more information.
    View ProductDone

  • Solex – Xenon Fire Alarm Beacon

    • Solex Fulleon – Xenon Fire Alarm Beacon
    • Available in Different Light Outputs – 2.5Cd, 10Cd & 15Cd
    • Flash Rate: 1Hz
    • IP 54 & IP 65 Options – For Indoors & Outdoors
    • Power: 24Vdc & 110Vac
    • Enclosure: ABS with Polycarbonate Lens
    • Available in Different Light Colour
    • Base: Red or White
    • QCD Approved.
    View ProductDone

  • Solo 100 Telescopic Access Poles

    • Solo 100 Telescopic Access Poles.
    • Extension from 1.26m to 4.5m (6m total).
    • Made from strengthened durable fiberglass.
    • Lightweight and portable tester poles.
    • Non-conductive material for risk free use.
    • “TotalLock” system ensures sections never lock.
    • Increase Height using Solo 101 for max. height of 9m.
    • Designed for Smoke Detectors placed at tall ceiling.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone

  • Solo 200 Detector Removal Tool

    • Solo 200 Detector Removal Tool.
    • Universal Detector Removal Tool.
    • Remove Smoke & Heat Detectors with ease.
    • Ideal for removal of most types of detectors.
    • Enables removal & replacement of detectors.
    • Adjustable for different sizes of detectors.
    • Color coded for different sizes of detectors.
    • Universal joint so tool never bends when in use.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone
  • Sale!

    Solo 330 Aerosol Smoke & CO Dispenser

    • Solo 330 Aerosol Smoke & CO Dispenser.
    • QCD Approved for use with all detectors.
    • Quick & strong for aerosol delivery.
    • Transparent cup to view detector LED.
    • Use at variety of heights and angles.
    • Suitable for detectors up-to 177mm in diameter.
    • Height adjusting accessories & poles.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone

  • Solo 365 Smoke Detector Tester

    • Solo 365 Smoke Detector Tester
    • ‘Auto-start’ proximity sensor – faster testing, less smoke waste
    • Auto-LED torch – allows simple testing of detectors in dark areas
    • Slim-line design – easier access to detectors in confined spaces
    • Clearing mode – eliminates re-alarms, increasing productivity
    • Delayed start mode – for non-standard detectors and ASD systems
    • Included – 1 x Solo 365 Head Unit, 1 x Solo 370 Lithium-Ion Battery Pack, 1 x Solo 371 Smoke Generator, 1 x Solo ES3 Smoke Cartridge, 1 x Spare 1060 Charger & USB Lead
    • Additional Accessories Available – Multi Height Testers.
    • Contact us for more information.
    View ProductDone

  • Solo 461 Cordless Heat Detector Tester

    • Solo 461 Wireless Heat Detector Tester.
    • Industry-standard for testing heat detector.
    • Battery-powered c/w charger.
    • Immediate & fast activation.
    • Can be used for Fixed Temperature Heat Detector.
    • Can be used for Rate-of-rise Heat Detector.
    • Can be used for Multi-sensor or Combination Detector,
    • Two separate battery batons for continued use.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone
  • Sale!

    Solo 461 Heat Detector Tester Kit

    • Solo 461 Heat Detector Tester Kit.
    • Battery powered heat detector tester kit.
    • Can be connected to Solo Access poles to reach up-to 9 metres.
    • Heat is focused directly into the detector sensor for fast testing.
    • Can trigger majority of spot & point heat detectors into alarm.
    • Powered by battery baton fitted within the pole for cordless use.
    • Transparent cup for clear view of detector LED & activation.
    • Automatically goes into standby after 120s for protection.
    • Switches off completely after 5 minutes in standby.
    • Provided with 1x battery baton and 240V fast charger.
    • 3000mAh battery ensures longer testing per charge.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone
  • Sale!

    Solo A3 Smoke Detector Test Gas

    • Solo A3 Smoke Detector Test Can.
    • Hand-held Test Gas Can – Fast Results.
    • Delivers Smoke to Detector immediately.
    • Standard Product to Test Smoke Detectors.
    • UL Certified for use with Fire Alarm Testing.
    • Contact us for more information.

    Solo A3 is obsolete as of 2016, kindly use Solo A5.

    Solo A5 Smoke Detector Tester

    View ProductDone
  • Sale!

    Solo A5 Smoke Detector Tester

    • Solo A5 Smoke Detector Tester – Aerosol Type.
    • For use with Solo 330/332 Dispensers.
    • Manufacturer approved tester for use with smoke detectors.
    • Flammable – should be stored under room temperature.
    • Non-toxic & Silicone-free to prevent detector contamination.
    • 250ml Volume Capacity – For use with 330 Dispensers.
    • Ex-stock with same day delivery.
    • Contact us for more information.
    View ProductDone
  • Sale!

    Solo A7 Detector Duster

    • Solo A7 Detector Duster.
    • Pressure can to clean contaminated detectors.
    • Prevents false alarm & for fire alarm maintenance.
    • Removes most dust and dirt from detector chamber.
    • Volume: 250ml of Clean Gas Canister.
    • Non-flammable & simple to use.
    • Ex-stock – Same day delivery.
    • Contact us for more information.
    View ProductDone
  • Sale!

    Solo C3 Carbon Monoxide Detector Tester

    • Solo C3 Carbon monoxide Detector Tester.
    • For use in carparks & CO Fixed Gas Detectors.
    • Immediate & fast action.
    • Used to detect response from CO Detectors.
    • Can be used with Solo 330 Dispenser.
    • Ex-stock for same day delivery.
    • Contact us for more information.
    View ProductDone

  • Solo ES3 Smoke Catridges

    • Solo ES3 Smoke Cartridges.
    • Detector capable Smoke for Wide Range of Detectors.
    • Non-flammable, non-pressurized & non-hazardous.
    • Instant detector activation.
    • Compact design.
    • Ex-stock with same-day delivery.
    • Contact us for more information.
    View ProductDone

  • UV/IR Flame Detectors

    • UV/IR Flame Detectors – Ultraviolet / Infrared.
    • Available for Safe Area & Explosion Proof Area.
    • QCD (Qatar Civil Defense) Approved for Fire Alarm.
    • Enclosure Options: Aluminium,  Alloy, Stainless Steel.
    • FOV & Range: 100° Coverage Angle & 30m Coverage.
    • Operating Voltage: 24Vdc (17Vdc to 32 Vdc).
    • Relay Outputs for Fire, Fault & Warning Alarm.
    • 4-20mA Analog Signal Output / Conventional.
    • Mounting Brackets, Air Shield & Sun Shield.
    • Contact us for more information with requirements.
    View ProductDone

  • Vesda Xtralis

    • Vesda Xtralis – Aspirating Smoke Detector.
    • Vesda-E VES has four programmable alarms.
    • Available in Single Pipe or Four Pipe Options.
    • Sector addressing based on sectors & zones with tagging.
    • Flair Detection technology delivers reliable early warning.
    • Multi-stage filtration & optical protection with clean air.
    • ASD & HSSD coming with LCD Display and non-LCD.
    • Available Variants: Vesda-E VEA, Vesda-E VEP,  Vesda-E VEU, VSP, VLP, VLS, VLC & VLF Filter, Vesda VRT-200, LaserSCANNER, Vesda LaserCOMPACT Marine, Vesda Sensepoint XCL, Vesda LaserCOMPACT Explosion Proof, Vesda Xtralis VLI LaserINDUSTRIAL Detector, Vesda-E VPS, Vesda VLF-250 LaserFOCUS, Vesda VLS-304 LaserSCANNER, Vesda Xtralis Power Supply Unit, Clips, Pipes, Test Points & Other Field Accessories.
    • Available Tubes, Clamps, Pipes, Filters, Power Supply & Accessories.
    • Contact us for more information.
    View ProductDone