Explosion Proof Equipment

Explosion Proof Electrical Equipment for use in Hazardous Areas & Explosive Atmospheres – ATEX Certified

Each Product is Custom Specified as Per Site Specifications / Conditions & Approvals – Contact us for assistance & purchase.

Showing all 50 results

  • Apollo Orbis Conventional Detectors

    • Apollo Orbis Conventional Detectors – Fire Alarm Devices.
    • Orbis Conventional – For Safe Area & Commercial spaces.
    • Orbis Marine – For use in boats, ships & offshore vessels.
    • Orbis Intrinsically Safe – Hazardous classified areas (ATEX).
    • Apollo Orbis Detector Series: ORB-HT, ORB-OP & ORB-OH.
    • For direct integration into conventional fire alarm system.
    • Intrinsically safe devices to be used with galvanic isolator.
    • Smoke Detector, Heat Detector & Multi-sensor detector.
    • Optional mounting kits for easy, fast & direct installation.
    • Optional relay bases available with dry contacts for alarm.
    • Suitable for use in offshore, evacuation shelters & spaces.
    • Industry standard for fire alarm with global approvals.
    • QCD Approved for integration to fire alarm systems.
    • Contact us for more information.
    View ProductDone

  • Aspirating Gas Detector

    • Aspirating Gas Detector – Sampling Type Detection.
    • Aspirating Gas Detection System – Integrated Control.
    • Detect toxic and flammable gases by air sampling.
    • Flammable Gas, Toxic Gas & Oxygen Level Monitoring.
    • Gas detectors are available with gas pump for air sample.
    • Special gas pumps are chemical resistant for toxic gases.
    • Explosion proof (ATEX) pumps are used for flammable gases.
    • Pumps are made from chemically resistant material and design.
    • Air flow, vacuum pumps & sensor to be used as per requirement.
    • HVAC Ducts requires specialized venturi effect aspirating units.
    • Gas Detectors for HVAC Ducts require specialized kits as required.
    • Contact us for more information on aspirating gas detectors.
    View ProductDone

  • Bartec Feam Enclosures

    • Bartec Feam Enclosures – Aluminium or Stainless-Steel c/w SS Screws
    • For use in Zone 1, 2, 21 & 22 Hazardous Areas
    • Custom designed by Factory as per client requirements & design.
    • Custom design assembly, approval & certification for assembled system.
    • Enclosure to be used for transformers, junction box reactors, barriers, control & signaling boards etc.
    • Material Either Marine Grade Copper Free Aluminium Light Alloy or Stainless Steel AISI 316L
    • Optional – Cast Iron Body / Cover, Anti condensate Orange Painting, Glass Windows, Drain & Breather Valves
    • Contact for more information.
    View ProductDone

  • Capri – Cable Glands

    • Capri Non-Armoured Cable Gland, Non-Armoured Barrier Gland, Armoured Cable Gland, Armoured Barrier Gland
    • Nickel-plated Brass, 316 SS, Bronze & Aluminium Options
    • Suitable Lubricant to be used for All Threads of SS and Aluminium
    • IP 68 Rated (With Sealing Washers)
    • Elastomeric seal for inner & outer sheath
    • Armour Clamping & Bonding
    • Contact us for more information.
    View ProductDone

  • Chalmit – Hazardous Area Lights

    • Chalmit – Hazardous Area Lights
    • Emergency Lighting, Flood Lighting, High Bay – Low Bay, Linear Lighting, Temporary Lights & Floodlights
    • Voltage Fluctuation Resistant
    • DC Operation (Non-Emergency Uses)
    • 3 Hour Emergency Backup
    • Easy Install & Maintenance
    • Custom Emergency Exit Sign (With Arrow)
    • Various IP Ratings & Hazardous Area Designs
    • Contact us for more information.
    View ProductDone

  • Diesel Fuel Leak Detection System

    • Diesel Fuel Leak Detection System – For Generator & Tank Areas.
    • Explosion Proof (ATEX) Rated Sensor for detection of Fuel Oils.
    • Intrinsically safe for use in hazardous atmospheres.
    • Sensor to be surface mounted on level platforms or leak sites.
    • Sensor certified for Ex II 1 Ex ia T4 Ga for use in Zone 1 Areas.
    • Control Panel / Controller available to monitor oil leaks & alarms.
    • Optional sounder to be mounted for alarm & oil spill measures.
    • Contact us for more information.
    View ProductDone

  • E2S – Explosion Proof Call Point

    • E2S Hazardous Area Call Points – For Fire Alarm & Signaling.
    • Available as break glass, push button or tool reset call point.
    • SIL 2 Compliant MCP Available as aluminium, GRP or 316 SS.
    • ATEX or IECEx certified Call Points – Explosion Proof & QCD.
    • Optional resistor, diode, monitoring modules or LED Indicator.
    • For Fire Alarm Systems, Suppression, Door Release Call Points.
    • Custom Tags & Labels on Stainless Steel Plate – for Text Label.
    • Available Variants: GNExCP7 / STExCP8 / GNExCP6 / BExCP3 / D1xCP1 / GNExCP7 / STExCP8 / GNExCP7 / STExCP8 / GNExCP6 / BExCP3 / IS-CP4
    • Contact us for more info on supply & configuration.
    View ProductDone

  • E2S – Explosion Proof Loudspeaker

    • E2S Hazardous Area Loudspeakers.
    • For PA (Public Address) System.
    • Available in 15W & 25W Loudspeaker options.
    • Available in different colours.
    • ATEX Certified – Explosion Proof.
    • Multiple transformer tappings.
    • Enclosures: Flame Retardant GRP, PPS Glass Reinforced, LM6 Aluminium, SS 316.
    • Custom Tags & Labels on Stainless Steel Plate.
    • Available Variants: BExL PA Loudspeaker / GNExL PA Loudspeaker / STExL1 PA Loudspeaker / D1xL PA Loudspeaker / E2xL PA Loudspeaker.
    • Contact us for more info on supply & configuration.
    View ProductDone

  • E2S – Explosion Proof Sounders

    • E2S Hazardous Area Flare / Horn / Sounders
    • Available as Alarm Horn Sounders, Siren, Hooter or Bell.
    • Sounders with Telephone Relay Initiate / Horn for use with Hazardous Area Telephones.
    • Can be integrated into existing Fire Alarm System & Other Alarms / Hazardous signaling.
    • Enclosures: Flame Retardant GRP, PPS Glass Reinforced, LM6 Aluminium, SS 316.
    • Custom Tags & Labels on Stainless Steel Plate.
    • Available Variants: BExS Flare Horn/Sounder / BExS Radial Horn/Sounder / GNExS Flare Horn/Sounder / GNExS Radial Horn/Sounder / STExS Flare Horn/Sounder / STExS Radial Horn/Sounder / D1xS Flare Horn/Sounder / D1xS Radial Horn/Sounder / D2xS Horn Sounder / E2xS Flare Horn/Sounder / BExH Flare Siren / BExH Radial Siren / IS-mA1 Horn/Sounder / IS-A105N Horn/Sounder / IS-D105 Horn/Sounder.
    View ProductDone

  • E2S – Intrinsically Safe Panel Mount – Indicator & Buzzer

    • E2S Intrinsically Safe Panel Mount Indicator & Buzzer.
    • For Intrinsically Safe Control Panels & Switchgears.
    • Panel Indicator – Available in Red, Amber, Green, Blue & White.
    • Panel Buzzer – 90dB at 1m.
    • Can be powered using zener barrier or galvanic isolator.
    • Enclosure: ABS Thermoplastic.
    • Available Variants: IS-pA1 Panel Mount Sounder / IS-pB1 Panel Mount Indicator.
    • Mounting through standard 22.5mm Diameter.
    • Contact us for more information.
    View ProductDone
  • Explosion proof Sounder Beacon by E2S by Crowngas Qatar

    E2S – Intrinsically Safe Sounder Beacon

    • E2S IS-mC1 Beacon Sounder
    • For use in Zone 0 Areas.
    • 100dB Sounder with Multi-Tones & Stages.
    • 23Cd LED Light Output – Bright & Clear.
    • Multiple Lens Color Available – For Identification.
    • Available with Combine Alarm & LED Beacon.
    • Can be operated by single zener barrier or galvanic isolator.
    • IP 65 rated – For use in Outdoors to prevent dust or water ingress.
    • Explosion Proof – ATEX & IECEx approved.
    • QCD Approved – For use with Fire Alarm Systems.
    • Contact us for more information.
    View ProductDone
  • E2S MEDC Xenon or LED Beacon by Crowngas Qatar

    E2S – Xenon & LED Strobe Beacons

    • E2S Hazardous Area Beacons.
    • Explosion Proof – ATEX Certified.
    • 74Cd & 170Cd Option Available.
    • 5 Joule, 10 Joule, 15 Joule & 21 Joule Xenon Strobe Available.
    • Multi-Mode with Different Flash Rates – As per site specifications.
    • High output xenon strobe beacon – Bright & Clear.
    • Different colors available as per specifications.
    • DC & AC Powered – For Fire Alarm Systems or legacy systems.
    • Enclosure: ABS Plastic, Flame Retardant GRP, LM6 Aluminium, SS 316.
    • Available Variants: D1xB2 / GNExB2 / STExB2 / BExBG / D1xB2 / GNExB2 / STExB2 / GNExB1 / BExBG / D2xB1 / E2xB / IS-L101L LED Beacon / STExB2 Rotating Beacon.
    • Contact us for more information.
    View ProductDone

  • Eaton CEAG GHG273 Explosion Proof Switch

    • Eaton CEAG GHG273 Explosion Proof Switch.
    • Prevents arcing of enclosed switch in hazardous area.
    • Large grounding plate with captive cover screws.
    • Large surface area and actuator to ensure operation.
    • IP66 Ingress Protection with Labyringth Seal.
    • Luminescent label on switch for visibility in dark area.
    • Contact us for more information.
    View ProductDone

  • Eaton CEAG GHG51 Plugs and Sockets

    • Eaton CEAG GHG51 Explosion Proof Plugs & Sockets.
    • Plugs & Receptacles rated for Zone 1 & 2 Hazardous Area.
    • Offering best in class Wall Socket / Plug / Coupler.
    • Devices rated for 16A / 32A / 63A / 125A currents.
    • IP66 Ingress Protection for harsh & wet areas.
    • Mechanically interlocked plug & receptacles.
    • Color-coded cover & plug ensures easy identification.
    • Nickel-plated brass contacts ensure rust free operation.
    • Made with fiber reinforced nylon, SS & Brass contacts.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Beacons

    • Explosion Proof Beacons – Hazardous Area Rated – Safety & Telecom.
    • Beacons available in Xenon Lamp or LED Type for High Light Output.
    • Enclosure: GRP, Marine Grade Alloy or Stainless Steel 316L (SS 316L).
    • Beacons are available in strobe, rotating, flashing & steady configuration.
    • High Temperature Units as per indoor or outdoor installation & mounting.
    • Marine listed for vessel and offshore applications in saline environments.
    • SIL 1 and SIL 2 Safety Level Rated Beacons – Ensure Safe Operation.
    • Zone 1 & Zone 2 Hazardous Area rated for fire alarm & visual signaling.
    • Eaton MEDC: MEDC XB15, MEDC XB9, MEDC XB8, MEDC XB4, MEDC XB13, MEDC XB12, MEDC TH12, MEDC XB87LED, MEDC SM87HXB, MEDC LD15 – Eaton Crouse Hinds Rated Explosion Proof Xenon and LED Beacons.
    • E2S: E2S D1xB2, E2S GNExB2, E2S STExB2, E2S BExBG, E2S D1xB2, E2S GNExB2, E2S STExB2, E2S GNExB1, E2S BExBG, E2S D2xB1, E2S E2xB, E2S IS-L101L LED Beacon, E2S STExB2 Rotating Beacon – E2S Visual Signals.
    • Federal Signal: G-STR Strobe Beacon, 154XSTHI, 224XTSHI, FB245THI.
    • Units available with QCD (Qatar Civil Defense) Approvals for Fire Alarm.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Beam Detector

    • Explosion Proof Beam Detector – Optical Smoke.
    • Fireray 3000 Explosion Proof & Flameproof Unit.
    • Unit certified for use in Zone 2 Hazardous Areas.
    • Working involves a transmitter head and receiver.
    • Range is between 10-80 meters between detectors.
    • Enclosure: Copper free Aluminium Alloy LM25, Red.
    • Optional controller for power, signal & alarm – Fire.
    • Controller supports up-to 2 sets of detectors/receiver.
    • Integrated Laser Alignment in Receiver Unit as required.
    • Fire & Fault Relay Contacts in Optical Beam Detector.
    • QCD Approved for use with Fire Alarm Systems.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Break Glass Manual Call Point

    • Explosion Proof Break Glass MCP – Manual Call Point.
    • Conventional Type Break Glass MCP for Hazardous Areas.
    • MCP used to raise alarm during fire, gas release or doors.
    • Enclosure: UV Resistant Glass Reinforced Polyester (GRP).
    • IP Rating: IP66 / IP67 Weatherproof and dust resistant.
    • Color: Red (standard), black, blue or as per choice/demand.
    • Optional: Red LED to indicate activation/operation/testing.
    • Lift flap and corrosion resistant models with custom labels.
    • SIL 2 Certification for Functional Integrity of Fire Alarm System.
    • QCD Approved – Qatar Civil Defense approved models available.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Control Stations

    • Explosion Proof Control Stations – For Control & Signaling.
    • Designed for use in Zone 1 and 21 Areas – Harsh Environment.
    • Control units are custom specific and as per requirements.
    • Enclosure: Corrosion-resistant FRP or Stainless Steel 316L.
    • Ex. certified Signal Lamps, pushbuttons & switches to be used.
    • Custom built units are fully configured and engineered to order.
    • Bartec ComEx – Control Stations for Hazardous Area Applications.
    • Eaton CEAG GHG41 GHG43 GHG44 – Ex. Proof Control Stations.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Enclosures

    • Explosion Proof Enclosures – Certified for hazardous areas.
    • Material: Marine Grade Aluminium or Stainless Steel 316L.
    • Optional: FRP (Fiber Reinforced Plastic) – Non-metallic Box.
    • Rated for installation in Zone 1 / 2 (Gases), Class I & II.
    • Color: Standard Grey but optional color options available.
    • Corrosion-free, acid resistant, weatherproof up-to +80 °C.
    • Empty Enclosures with mounting plate are available for use.
    • Enclosures are certified only for mechanical integrity of unit.
    • Bartec EJB Enclosure – Custom Designed Flameproof Units.
    • Eaton Crouse-Hinds EJB Enclosure – Explosion Proof Boxes.
    • Appleton ATX – Flameproof Enclosures with custom outlets.
    • Rittal Ex – Enclosures in Plastic/SS with Screw/Hinge Cover.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Flame Detector

    • Explosion Proof Flame Detector.
    • Flame Detecting Principle: UV/IR.
    • Enclosure: Metallic Type, Aluminium 6061.
    • FOV & Range: 100° Coverage Angle & 30m.
    • Operating Voltage: 24Vdc (17Vdc to 32 Vdc).
    • Relay Outputs for Fire, Fault & Warning Alarm.
    • 4-20mA Analog Signal Output / Conventional.
    • QCDD Approved for Fire Panel Integration.
    • Aluminium Mounting Bracket for 360° installation.
    • Optional: Sun shield & Air shield Accessories.
    • Contact us for more information.

    Flame Detector is suitable for Woqod LPG Storage Tank Flame Detection in Outdoor Area’s with several installation across Qatar. Contact us for more information & technical support.

    View ProductDone

  • Explosion Proof Gas Detector

    • Crowcon Xgard Fixed Gas Detector
    • Xgard Type 1 – Nylon: 0.5kg / Alloy: 1kg / 316 SS: 3.1kg
    • Xgard Type 2 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Xgard Type 3 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Xgard Type 4 – Aluminium: 1.5kg
    • Xgard Type 5 – Aluminium: 1kg / Stainless steel: 3.1kg
    • Xgard Type 6 – Aluminium: 1kg / Stainless steel: 3.1kg
    • XgardIQ – Stainless steel 316: 5.5kg
    • TXgard-IS+ – Carbon Loaded Nylon Enclosure: 0.7kg
    • Flamgard Plus – Marine Grade Alloy / SS 316: 2.2kg
    • TXgard Plus – Marine Grade Alloy / SS 316: 2.2kg
    • Explosion Proof – ATEX Certified Fixed Gas Detector
    • Low-cost reliable Gas Detector – In Battery Rooms.
    • Available in Nylon GRP,  Aluminium, Marine Alloy or SS 316.
    • Ability to detect several ranges of flammable gases, toxic & oxygen.
    • 4-20mA Analog Signals – Direct PLC & Plant Integration.
    • Requires half-yearly calibration and system testing.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Heat Detector

    • Explosion Proof Heat Detector.
    • Rated Compensated Heat Detector Elements.
    • MEDC HD1 Heat Detector Range – For Hazardous Areas.
    • E2S D1xH1, D2xH1, GNExH1, STExH1 Heat Detectors.
    • ATEX & IECEx – Explosion Proof Certifications Available.
    • Optional red led indicator for heat detector activation signal.
    • Temperature Options: Range 60°C – 385°C with optional guard.
    • Enclosure: Marine Grade LM6 Aluminium, GRP or 316L SS.
    • IP66/67 Ingress Protection with corrosion proof junction box.
    • Enclosure Color: Red or Grey (Custom Colors available on demand).
    • Multi-angle wall or ceiling bracket available for mounting.
    • Optional Integration with wide range of addressable module.
    • Certified for use in extremely harsh and hazardous environments.
    • Optional EOL Module or Series Module with resistor/diode/zener.
    • Entry Ports: M20, 1/2″ NPT, 3/4″ NPT entries based on mounting.
    • Operating Temperature: -50° to +105°C for use in extreme temperature.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof M20 Glands

    • Explosion Proof M20 Glands.
    • For Hazardous Area Installations & Termination.
    • IP 66 & IP 68 Certified for outdoor installation.
    • Available in Variety of Material & Types.
    • Non-metallic & Metallic M20 Cable Glands.
    • Create tight weatherproof seals for secure glanding.
    • Armored & Non-armored M20 Cable Glands.
    • Available for other sizes – M16, M25, M32 & More.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Motion Sensor

    • Explosion Proof Motion Sensor – Motion Detector.
    • Microwave Activation Sensor for motion detection & action.
    • Motion Detection & Intrusion Detection in Industrial Areas.
    • Detection Zone based on wide coverage or mounted height.
    • Enclosure: Sensor in Explosion Proof / Flame Proof Housing.
    • Enclosure: Aluminium type with NEMA 4X IP66 Weatherproof.
    • Volt free relay activation when motion has been detected.
    • Entries: 3/4″ NPT Pipe Thread with Housing & Bracket.
    • Cable Length: Manufacturer Specified as per site condition.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Plugs

    • Crowngas offers Explosion Proof Plugs.
    • 3-pole, 4-pole & 5-pole Ex. Plugs.
    • For use in Zone 1 & 2 Hazardous Areas.
    • Impact resistant polyamide enclosure.
    • Fiberglass reinforced polyester – Ex. Certified.
    • Stainless steel AISI 316 L – ATEX Certified.
    • Rated for 16A / 32A /63A rated for 415V.
    • Ingress Protection: IP66.
    View ProductDone

  • Explosion Proof Pull Stations

    • Explosion Proof Pull Stations – Pull Handle Type.
    • Conventional Type Pull Station Call Point for Hazardous Areas.
    • Ideal for use in extreme weather and corrosive environments.
    • Pull Station available in two types – lift & pull or push & pull.
    • IP Rating: NEMA Type 4X & IP66/67 Weatherproof Protection.
    • Color: Standard Red, Optional Blue, Yellow or Custom Colors.
    • Enclosure: Cast Aluminium or Glass Reinforced Polyester (GRP).
    • SIL 2 Compliant to maintain functional integrity of fire alarm system.
    • Entries: 3/4″ NPT, 1/2″ NPT or Standard M20 Entries with Adaptors.
    • Custom Labels, tags & equipment tags in stainless steel plates.
    • Optional Accessories: Pole Mount Bracket Kit or Sunshade Kits.
    • QCD Approved – Qatar Civil Defense approved models available.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Smoke Detector

    • Explosion Proof Smoke Detector.
    • Photoelectric Type Smoke Detector for use in Hazardous Area.
    • ATEX & IECEx – Explosion Proof Certifications Available.
    • Built-in red led indicator is activated in the presence of smoke.
    • Built-in 4-20mA Analog Signal Output for PLC / DCS / Scada.
    • Built-in Relays for Smoke Alarm, Fault Alarm & Auxiliary Output.
    • IP44 Ingress Protection – Suitable for Indoor / Humid / Moisture.
    • Sensor module is intrinsically safe (I.S) & hot-swappable in field.
    • Enclosure: ABS Plastic Smoke Detector in Aluminium Junction Box.
    • Entry Ports: Standard 3/4″ NPT or M25 with 1/2/3/4 Port Configuration.
    • Operating Temperature: -20°C to +65°C for use in extreme temperature.
    • Optional Duct Mount Kit and Parts for Smoke Detection in HVAC Ducts.
    • Contact us for more information.
    View ProductDone

  • Explosion Proof Sounder Beacon Units

    • Explosion Proof Sounder Beacon Units – Combination AV.
    • Integrated Audio-Visual Units for Hazardous Areas Signaling.
    • ATEX Certified for use in Harsh Explosive Atmospheres.
    • Combination units can be used for telephone signaling.
    • Beacons are of xenon strobe type with 21 Joule output.
    • Integrated sounders have a maximum sound of 125dbA.
    • Enclosure: GRP, LM6 Aluminium, 316 Stainless Steel type.
    • Intrinsically safe units are available for use with IS Barrier.
    • Units are corrosion proof with an IP 66 / 67 protection.
    • Custom fixture lights are available for Fire, Gas & Sounder.
    • Signaling lights with custom colors and SS nameplates.
    • Option: Factory Certified Units or Custom Configured.
    • Available MEDC: MEDC CU1, CU1S, CU1SP, CU1H, CU1HP.
    • Available E2S: BExCS, D1xC, STExC, IS-mC1, D2xC2, D2xC1, E2xC1.
    • QCD Certified units are available for use with fire alarm.
    • Contact us for more information.
    View ProductDone

  • Federal Signal Beacon

    • Federal Signal Beacon.
    • Available in 24Vdc & 120-240Vac Options.
    • Enclosure: Glass Reinforced Polyester (GRP).
    • Dome guard included with LED Beacon.
    • Standard M20 Entries (optional M25 Entry).
    • Field configurable flash patterns – 60 FPM.
    • IP66 Ingress Protection Enclosure Rated.
    • IP69K Compliant for Harsh Atmospheres.
    • Zone 1 & 2 Hazardous Area Equipment.
    • QCD Approved for Fire Alarm System.
    • Contact us for more information.
    View ProductDone

  • Flame Detector

    • Sense-ware Flame Detector
    • Available Variants: UV, IR, UV/IR.
    • Enclosure: GRP (Glass Reinforced Polymer), Corrosion Proof.
    • Explosion Proof – For installation in Zone 2 & Safe Areas.
    • Analog Output: 4-20mA Signals for PLC Integration.
    • Relay Output: For Fire Alarm Panel Integration.
    • Designed to detect all Hydrocarbon & Hydrogen fires.
    • QCD Approved – For Integration with Fire Alarm Systems.
    • Range: 23m with <10s Response Time for quick response.
    • LED Indicators: Green LED, Yellow LED & Red LED.
    • IP 65 Protection to prevent dust & water ingress.
    • Available with Swivel Mount for field angle mounting.
    • Test Lamp – For Testing & Maintenance of Detector.
    • Contact us for more information.
    View ProductDone
  • Environmental Sampling Units by Crowngas Qatar

    Gas Sampling System

    • Crowcon Air Aspirated Sample Systems/ Gas Sampling System.
    • Only Sampling System usable in Hazardous Area based on installation.
    • Uses eductor for sampling (using Venturi Effect) – The eductor is driven by compressed air to create a negative pressure to draw the sample.
    • Electrical Components are the sensor and Intrinsically Safe flow device.
    • Principle: The air aspirated system uses a compressed air driven vacuum generator to draw a gas sample from a single point. Explosion proof gas detectors are fitted to monitor for flammable gases & toxic gases.
    • Flow rate is limited to 1m/sec – Can be adjusted as per request & approved design with factory approvals.
    • Certified for use in Zone 1 or Zone 2 hazardous areas, IP-65 Rated.
    • Customized Engineered Solutions & Support from Factory for Design.
    • Contact us for more information.
    View ProductDone

  • Hawke – Explosion Proof Cable Gland & Accessories

    • Explosion Proof Glands – M20, Individual Cable Glands for Barrier Seal, M25
    • Explosion Proof Breather Drains – Prevent Condensation & Moisture in Enclosures
    • Explosion Proof Adaptor & Reducer
    • Explosion Proof Dome Stopping Plugs
    • Explosion Proof Male Female Connector – For Low Power, Medium Power & High-Power Signals / Power
    View ProductDone

  • Hazardous Area Telephone

    • Funke Huster Fernsig – IP Telephone.
    • Explosion Proof IP Telephone – Tropicalized.
    • For use in Zone 1, 2, 21 & 22 Hazardous Areas.
    • Polycarbonate Material & Body – Strong & Sturdy.
    • Surface Mount or Wall Mount for Field Installation.
    • Illuminated LCD Display & Keypad – For Dark Environments.
    • Supports H.323, SIP, TSIP, SIPS Protocols & Other Standards.
    • Display with integrated heating for ultra-low temperature environments.
    • Integrated Beacon/Sounder for Telephone Relay Initiate.
    • Contact for more information.
    View ProductDone

  • Intrinsically Safe Equipment

    • Crowngas offers Intrinsically Safe Equipment (I.S) Certified.
    • Intrinsically Safe Equipment can be used with Safety Barrier.
    • MTL or P&F Pepperl+Fuchs Galvanic Isolator or Zener Barrier.
    • Intrinsically Safe Flasher – For Fire & Gas Alarm Visual Signal.
    • Intrinsically Safe Beacon – For Fire & Gas Alarm Visual Signal.
    • Intrinsically Safe Sounder – For Fire & Gas Alarm Audio Signal.
    • Intrinsically Safe Sounder Flasher – For Audio Visual Signaling.
    • Intrinsically Safe Pushbuttons – For Hazardous Area Initiation.
    • Intrinsically Safe Flammable Fixed Gas Detectors – Pellistor Type.
    • Intrinsically Safe Point Type Flammable Gas Detectors – Infrared.
    • Intrinsically Safe Toxic Gas Detectors – Electrochemical Sensors.
    • Intrinsically Safe Manual Call Points (MCP) – For Hazardous Area.
    • Intrinsically Safe Break Glass MCP – For Hazardous Area Fire Alarm.
    • Intrinsically Safe Smoke Detectors – Conventional Fire Alarm Systems.
    • Intrinsically Safe Heat Detectors – Conventional Fire Alarm Systems
    • Intrinsically Safe LHD – Linear Heat Detector Cables for FA Systems.
    • Intrinsically Safe HART Monitors – For Analog Transmitter Equipment.
    • Suitable Safety Barriers to be used as specified by Manufacturer.
    • Contact us for more details.
    View ProductDone

  • MEDC – Break Glass – Manual Call Point

    • MEDC Break Glass Manual Call Point
    • For use in Hazardous Areas
    • SIL 2 Certified
    • Available in GRP Enclosure, LM35 Aluminium or SS 316
    • Optional LED Indicator & Lift Flap
    • In-line & end of line resistors.
    • SS Screws for fixing
    • IP 66, IP 67, IP 68 Rated
    • Key operated Test Facility
    • Contact for more information.
    View ProductDone

  • MEDC – Intrinsically Safe Xenon Beacons

    • MEDC XB8 Intrinsically Safe Beacons
    • Corrosion Resistant
    • Enclosure: GRP
    • High Intensity Flash
    • Clear Lens
    • Contact for more information.
    View ProductDone

  • MEDC – LED Beacon

    • LED Beacon
    • Explosion Proof for use in Hazardous Areas
    • MEDC LD15, MEDC SM87LED & Other Crouse-Hinds Series
    • SIL 1 Approval
    • Enclosure: UV Stable GRP, LM35 Aluminium, SS 316
    • SS Screws Included
    • Low Maintenance LED Array
    • Contact for more information & design.
    View ProductDone

  • MEDC – Pull Handle Call Point

    • MEDC PH1 Pull Handle Call Point
    • For use in Explosive Atmospheres
    • SIL 1 Certified
    • Corrosion Resistant
    • Enclosure: GRP with SS Cover
    • In-line & End of Line Resistors
    • SS Screws
    • Contact for more information and design.
    View ProductDone

  • MEDC – Pushbutton – Manual Call Point

    • MEDC Pushbutton designed for use in Hazardous Area & Explosive Atmospheres
    • SIL 2 Certified, Intrinsically Safe & Flameproof
    • Enclosure in GRP, LM35 High Grade Aluminium Alloy or SS 316
    • IP 66, IP 67 & IP 68 Rated
    • Lift Flap
    • Optional LED Indicator & In line, EOL Resistor
    • Standard Latching
    • Contact for more information
    View ProductDone

  • MEDC – Safe Area Xenon Beacons

    • MEDC Safe Area Xenon Beacons
    • Available in Weatherproof for Outdoor Areas – IP 65
    • High Intensity Flash
    • Enclosure: Corrosion Resistant GRP
    • Optional Lens Guard
    • Multi Lens & Enclosure Colours Available
    • Contact for more information & design.
    View ProductDone

  • MEDC – Sounder

    • MEDC Intrinsically Safe Sounders, Weatherproof Sounders & Metallic Sounders
    • MEDC DB7, DB3BM, DB15 & Other Sounder Range
    • Sounder for use in Hazardous & Explosive Atmospheres
    • 27 Adjustable Tones & Settings
    • SS Screws
    • Enclosure: GRP, LM35 or SS
    • Colour: Red as Standard
    • Custom Colours, Tags & Labels
    • Contact for more information.
    View ProductDone

  • MEDC – Xenon Beacon

    • MEDC High Output Xenon Beacons
    • SM87HXB, XB11, XB12, XB15, XB4
    • Designed for use in Hazardous Areas
    • Enclosure: GRP, LM35 Aluminium, SS 316
    • SIL 1, SIL 2 Beacons Available
    • Various Lens Color, Enclosure, Flashing Rates & Outputs
    • 5J, 10J, 15 & 21 Joule Beacons
    • Custom tag & duty plates
    • Beacon / Sounder Combination unit Available
    • SS Screws
    • Contact for more information.
    View ProductDone

  • MEDC TH12 – Rotating Beacon

    • MEDC TH12 Rotating Beacon
    • For use in Explosive Atmospheres
    • Optional Steel Backstrap & lens guard
    • Custom flashing & rotating speeds
    • Tungsten Halogen Bulb
    • Enclosure: GRP
    • SS Screws
    • Contact for more information & design.
    View ProductDone
  • Galvanic Isolator by Crowngas Qatar

    MTL – Galvanic Isolator

    • MTL4500/5500 Range of Galvanic Isolator.
    • Can be used to control volt-free contacts in a safe area.
    • Compact modular design with DIN rail support.
    • Single & multi-channel I/O modules.
    • 3-port isolation & Variety of models for different applications.
    • Explosion Proof – ATEX certified & Function safety approval.
    • Available Models: MTL5561 Fire and Smoke Detector Interface, MTL5051 Serial Data Comms Isolator, MTL5500 Range Intrinsically Safe Galvanic Isolators, MTL5510 Four Channel Multi-Function Switch / Proximity Detector, MTL5513 Two Channel Line Fault Detection Switch / Proximity Detector, MTL5514 Relay Output Switch / Proximity Detector, MTL5521 Solenoid / Alarm Driver, MTL5521-T Loop Powered Solenoid / Alarm Driver, MTL5522 Loop Powered Solenoid / Alarm Driver, MTL5523 Solenoid / Alarm Driver, MTL5524 Switch Operated Solenoid Driver, MTL5525 Switch Operated Solenoid Driver – Low Power, MTL5526 Switch Operated Relay, MTL5573 Temperature Converter
    • Contact us for more information.
    View ProductDone
  • Zener Barrier by Crowngas Qatar

    MTL – Zener Barrier

    • MTL7700 Range of Zener Barrier.
    • Compact modular design with DIN rail support.
    • Zener Barriers are used in Intrinsically Safe (I.S) Loops.
    • Explosion Proof – ATEX & Function safety approval Certified.
    • Available Analogue Models: MTL7756ac / MTL7760ac Resistance temperature detectors Thermocouples, ac sensors, MTL7706+ / MTL7787+ Transmitters, 2-wire, 4/20mA, MTL7728+ / MTL7787+ Controller outputs, online line earthed Controller outputs, neither line earthed.
    • Available Digital Models: MTL7787+ / MTL7741/3 Switches, MTL7728 Solenoids, alarms, LEDs.
    • Contact us for more information.
    View ProductDone

  • Petrol Leak Detection System

    • Petrol Leak Detection System for use near Petrol Storage Tanks.
    • Explosion Proof (ATEX) Rated Sensor for detection of Fuel Oils.
    • Intrinsically safe for use in hazardous atmospheres.
    • Sensor to be surface mounted on level platforms or leak sites.
    • Sensor certified for Ex II 1 Ex ia T4 Ga for use in Zone 1 Areas.
    • Control Panel / Controller available to monitor oil leaks & alarms.
    • Optional sounder to be mounted for alarm & annunciation.
    • Contact us for more information.
    View ProductDone

  • Roxtec Cable & Pipe Seal

    • Roxtec Cable Transit
    • Sealing Modules with Cores
    • Used to seal Pipes, Cables & Wires of Different Diameters
    • Varying Diameters and Sizes
    View ProductDone
  • Environmental Sampling Units by Crowngas Qatar

    Sampling Gas Detector

    • Crowcon Environmental Sampling Unit / Sampling Gas Detector.
    • Low-cost Air Sampling Unit for HVAC & other critical Equipment.
    • Detection of toxic / flammable gases in hot, humid or dusty environments.
    • Single Point / Multi Point / Sequential / Aspirated Sample System.
    • Low & High Alarms signals to program Relays for Shutdown / AV Units.
    • Single Point – Gas Detector using Pellistor / IR Sensor for High Temps.
    • Multi Point – Made of Multiple Point for Environmental Gas Monitoring.
    • Engineered / Customized Solutions available certified for Hazardous Areas (with 1, 2 or 3 sensors) and Non-Hazardous Areas. Can be programmed for executive action based on detection from multiple detectors.
    • Contact us for more information.
    View ProductDone

  • Thermal Imaging Camera

    • Thermal Imaging Camera by Drager.
    • Other brands available on request.
    • One hand easy to use operation.
    • Intrinsically Safe & Explosion Proof.
    • IR Window with Laser Pointer.
    • Snapshot button for recording.
    • Water, dust & heat resistant.
    • USB Interface & Charging Pads.
    • Rechargeable lithium-ion battery.
    • Contact us for more information.
    View ProductDone

  • Vesda Xtralis

    • Vesda Xtralis – Aspirating Smoke Detector.
    • Vesda-E VES has four programmable alarms.
    • Available in Single Pipe or Four Pipe Options.
    • Sector addressing based on sectors & zones with tagging.
    • Flair Detection technology delivers reliable early warning.
    • Multi-stage filtration & optical protection with clean air.
    • ASD & HSSD coming with LCD Display and non-LCD.
    • Available Variants: Vesda-E VEA, Vesda-E VEP,  Vesda-E VEU, VSP, VLP, VLS, VLC & VLF Filter, Vesda VRT-200, LaserSCANNER, Vesda LaserCOMPACT Marine, Vesda Sensepoint XCL, Vesda LaserCOMPACT Explosion Proof, Vesda Xtralis VLI LaserINDUSTRIAL Detector, Vesda-E VPS, Vesda VLF-250 LaserFOCUS, Vesda VLS-304 LaserSCANNER, Vesda Xtralis Power Supply Unit, Clips, Pipes, Test Points & Other Field Accessories.
    • Available Tubes, Clamps, Pipes, Filters, Power Supply & Accessories.
    • Contact us for more information.
    View ProductDone