Skip to content
Crowcon GM64 Addressable Gas Panel
Support for 64 Addressable Gas Detectors – in single panel.
Support for up-to 16 / 64 / 128 Fixed Gas Detectors.
GM16 / GM64 / GM128 Available in Different Configurations.
4-20mA Analog & RS-485 MODBUS Standard Communication.
Direct Web page live feed communication – For BMS Integration.
Multiple Data & Zone Screens available – Real Time Readings.
Available in Fiberglass Enclosures, 19″ rack mount or aluminium.
Contact us for more information.
Crowngas Offers Automatic Calibration / Bump Test Station
To Manage Calibration of Large Portable Network
Station can be Mains or Battery Powered
Store & Manage Alarm Levels from a single point.
Logged Information for Pass / Fail of each portable
Collect all Alarms & Event Logs from Individual Portable.
Doesn’t require trained technician for Calibration.
Save cost & time by utilizing Automatic Calibration Station.
Comprehensive Auditable Reports on Each Portable.
PC Connection / Backup in USB.
Contact us for more information.
IAQ8494 Ambient CO2 Detector
Handheld Device to measure CO2 levels.
Can be used to measure CO2 Leaks in MGPS.
CO2 Gas Lines – Leak Detection and Point Sources.
0 – 9,999ppm level reading.
Backlit display & adjustable audible alarm.
Capable of measuring ambient temperature.
Includes Adaptor & carry case.
Contact us for more information.
Crowcon Detective+ Transportable Area Gas Monitor.
Multi-area gas monitors for work in temporary areas.
Required in confined spaces/maintenance/shutdown areas.
Optional Pump for Gas Sampling & Enclosed Space Check.
Built in alarm sounder and multiple beacons for local alert.
Built in Display for Real Time Readings & Event Logging.
Can be networked to setup a perimeter or secure an area.
Available in Wireless* mode for signal transmission.
Capable of networking up-to 25 Detective+ area gas monitors.
Contact us for more information.
Crowcon Gasmaster 4 Channel Gas Control Panel.
Capable up-to 4 Oxygen, Toxic or Flammable Gas Detectors.
Each detector assigned 2 levels of independent alarm.
Push buttons and LED Display enable easy operation.
Functional Certification & Capable – SIL 2 Certified.
RS-485 MODBUS communication for DCS/PLC/SCADA.
Battery Backup – For operation in case of power failure.
Fire Alarm Control Panel Integration & Networking.
Event Logger – To Measure, Fire, Gas & Fault Alarms.
Contact us for more information.
Crowcon IRmax Infrared Flammable Fixed Gas Detector
Wall Mounting & Pipe Mounting with Suitable Accessories.
4-20mA Analog Output for Integration with Control System.
Optional – HART & RS-485 MODBUS for Addressable System.
SIL 2 Rated for Process & Functional Safety Equipment’s.
ATEX Certified for use in Explosive Atmospheres & Offshore.
Enclosure: Stainless Steel 316 c/w Optional Display.
Contact us for more information.
Crowcon TXgard-IS+ Toxic & Oxygen Gas Detector.
Intrinsically Safe Fixed Gas Detector (with Isolator)
Local LCD Display – Clear Display with menu options.
Used to detect Toxic Gases & Oxygen Levels.
Explosion Proof (ATEX) Certified for Zone 0 areas.
Capable of Detecting H2S, NH3, O2 & Toxic Gases.
4-20mA Signal – For Analog Signal to PLC or BMS.
Calibration to be performed manually on field.
Can be used as sampling detector with flow adaptor.
Strong, sturdy carbon loaded nylon enclosure with IP65.
Contact us for more information.
Xgard Bright – Flammable, toxic gas & oxygen monitoring.
Available in ADC12 Aluminium Alloy Enclosure Material.
IP65 Protection for use in Outdoors (Optional IP66)
Addressable Gas Detector for large area networks.
Clear OLED Display for use in sunlit / bright areas.
Magnetic non-intrusive calibration with key.
ATEX Certified for use in hazardous areas.
Built in Relays – Alarm 1, Alarm 2 & Fault.
Certified for use in Zone 1 & Zone 2 Areas.
Contact us for more information.
Crowcon Xgard Fixed Gas Detector
Xgard Type 1 – Nylon: 0.5kg / Alloy: 1kg / 316 SS: 3.1kg
Xgard Type 2 – Aluminium: 1kg / Stainless steel: 3.1kg
Xgard Type 3 – Aluminium: 1kg / Stainless steel: 3.1kg
Xgard Type 4 – Aluminium: 1.5kg
Xgard Type 5 – Aluminium: 1kg / Stainless steel: 3.1kg
Xgard Type 6 – Aluminium: 1kg / Stainless steel: 3.1kg
Explosion Proof – ATEX Certified Fixed Gas Detector
Low-cost reliable Gas Detector – In Battery Rooms.
Available in Nylon GRP, Aluminium or SS 316.
Ability to detect several ranges of flammable gases, toxic & oxygen.
4-20mA Analog Signals – Direct PLC & Plant Integration.
Requires half-yearly calibration and system testing.
QatarEnergy Approved for use in Gas Detection System.
Contact us for more information.
Crowcon Xgard Type 1 Fixed Gas Detectors.
Fixed Point Ex ia Intrinsically Safe Toxic & Oxygen Detectors.
Uses an electrochemical sensor to provide 2-wire 4/20mA Output.
Operating temperature between -40°C to +50°C & humid spaces.
Xgard Type 1 has standard GRP Enclosure – Glass Reinforced Nylon.
GRP Polymers are chemically resistant & cost effective for wide use.
Optional Accessories include spray deflector, flow adaptor & W/P caps.
Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
Offering Calibration, Sensor & Component Spares, Replacement.
Contact us for more information.
Crowcon Xgard Type 2 Flameproof Fixed Gas Detectors.
Type 2 Exd Flameproof Toxic & Oxygen Detectors.
Uses an electrochemical / pellistor sensor for gas detection.
Operating temperature between -40°C to +50°C & humid spaces.
Xgard Type 2 has standard Aluminium Enclosure – Rigid & Strong.
Aluminium enclosures are highly durable with tough polyester coat.
Accessories available for duct mounting & sampling applications.
Optional Accessories include spray deflector, flow adaptor & W/P caps.
Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
Offering Calibration, Sensor & Component Spares, Replacement.
Contact us for more information.
Crowcon Xgard Type 3 Fixed Gas Detectors.
Exde Flameproof Flammable Explosion Proof Gas Detectors.
Uses poison resistant 3-wire pellistor sensor for flammable gas.
Operating temperature -40 to +80°C & humid conditions installation.
Optional Accessory Enclosure required for connection – For easy zero/cal.
Aluminium Enclosure with Polymer coating as standard – ATEX Certified.
Optional Accessories include spray deflector, flow adaptor & W/P caps.
Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
Offering Calibration, Sensor & Component Spares, Replacement.
Contact us for more information.
Crowcon Xgard Type 4 High Temperature Flammable Gas Detectors.
Exd Flameproof Flammable Gas Detectors use poison resistant sensors.
Detector comes in either 316 Stainless Steel or Aluminium Housing.
Contains terminals for 3-wire mV Wheatstone Bridge Output.
Operating Temperature of -20°C to 150°C for a wide operating range.
Optional Accessory Enclosure required for connection – For easy zero/cal.
Aluminium Enclosure with Polymer coating as standard – ATEX Certified.
Optional Accessories include spray deflector, flow adaptor & W/P caps.
Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
Offering Calibration, Sensor & Component Spares, Replacement.
Contact us for more information.
Crowcon Xgard Type 5 Flammable Gas Detector.
Consists of poison resistant pellistor sensor for flammable gases.
Built-in amplifier unit to provide 3-wire 4-20mA Analog Output.
Operating temperature between -40°C to +55°C wide temperatures.
Aluminium Enclosure with Polymer coating as standard – ATEX Certified.
Optional Accessories include spray deflector, flow adaptor & W/P caps.
Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
Offering Calibration, Sensor & Component Spares, Replacement.
Contact us for more information.
Crowcon Xgard Type 6 Fixed Gas Detectors.
Type 6 is designed to Detect % VOL Levels of Flammable Gases. Uses thermal conductivity sensor within metallic enclosure (ATEX).
Operating temperature +10°C to +55°C & humid conditions installation.
Aluminium Enclosure with Polymer coating as standard – ATEX Certified.
Optional Accessories include spray deflector, flow adaptor & W/P caps.
Comes with M20 (standard), 1/2″ NPT or 3/4″ NPT cable gland optional.
Offering Calibration, Sensor & Component Spares, Replacement.
Contact us for more information.
Crowcon Gas Control Panel
Custom PLC based Engineered Rack Systems
Can support 13 or more Detectors (Flexible) – Conventional System
Push Buttons & LED Display reading for each detector
MODBUS Compatible
SIL-1 Certified
Battery Backup / UPS
Available in Panel Mount / Wall Mount / Custom Rack Solutions
Crowcon Xgard Fixed Gas Detector
Xgard Type 1 – Nylon: 0.5kg / Alloy: 1kg / 316 SS: 3.1kg
Xgard Type 2 – Aluminium: 1kg / Stainless steel: 3.1kg
Xgard Type 3 – Aluminium: 1kg / Stainless steel: 3.1kg
Xgard Type 4 – Aluminium: 1.5kg
Xgard Type 5 – Aluminium: 1kg / Stainless steel: 3.1kg
Xgard Type 6 – Aluminium: 1kg / Stainless steel: 3.1kg
XgardIQ – Stainless steel 316: 5.5kg
TXgard-IS+ – Carbon Loaded Nylon Enclosure: 0.7kg
Flamgard Plus – Marine Grade Alloy / SS 316: 2.2kg
TXgard Plus – Marine Grade Alloy / SS 316: 2.2kg
Explosion Proof – ATEX Certified Fixed Gas Detector
Low-cost reliable Gas Detector – In Battery Rooms.
Available in Nylon GRP, Aluminium, Marine Alloy or SS 316.
Ability to detect several ranges of flammable gases, toxic & oxygen.
4-20mA Analog Signals – Direct PLC & Plant Integration.
Requires half-yearly calibration and system testing.
Contact us for more information.
FGard IR3 Flame Detector
Detect all Hydrocarbon Fires within 60m.
Heated windows to prevent condensation.
Smart System – Doesn’t Require Testing
SIL 2 Approved
FM Approved
ATEX Approved for use in Hazardous Areas
Enclosure: Copper free Aluminium or SS
Output: 4-20mA, Alarm & Fault Relays
HART Capable
Optional : Pole Mount Kit, Sunshield, Mounting Bracket, Flame Simulator Test Kit
Flamgard Plus – Flammable Gas Detector.
For Hydrocarbon, Hydrogen, Petrol & Vapor Detection.
Non-Intrusive Calibration – No hot work permits required.
Added Fault & Alarm Relays.
IP65 Protection for use in outdoors.
Contact us for more information.
AGP 45 Flammable Gas Leak Detector
Handheld Detector – Pinpoint Flammable Leak Sources
Adjustable Tick Rate & Sensitivity Increases on Leak
Includes Audible & Visual Alarm Indicators
Contact us for more information.
Safe Area Gas Detector.
Gas Detector available with Gas Panel / Controller.
Calibrated to detect LPG, CO, Toxic & Flammable Gas.
Flame Detectors available for Zone 2 Areas with QCD.
To be used in non-hazardous areas.
Basic Ingress Protection from Sun, Water & Dust.
Half yearly calibration & maintenance.
Contact us for more information.
Crowcon Gas-Pro – Multi Gas Portable Detector
Support for up-to 5 Gas Sensors & Detection.
Support for large variety of toxic & flammable gases.
Display for real time readings – Clear & Precise.
Rechargeable – Explosion Proof Adaptor.
IP 65 and IP 67 protection – Prevent dust & water ingress.
Pumped & Diffusion Options – To check for confined spaces.
Bump & calibration reminders for HSE & Site compliance.
Contact us for more information.
Crowcon Gas-Pro IR – Portable Gas Detector
Detection of flammable gases using IR (Infrared).
Extremely accurate & reliable with increase safety.
Extremely durable in low oxygen environments.
Immune to sensor poisoning / inhibition & high levels of gas.
Useful in low oxygen or high concentration environments.
IP 65 and IP67 rated – to prevent water & dust ingress.
Explosion Proof – ATEX Certified for use in hazardous areas.
Ensure regular bump test & calibration for the portable.
Contact us for more information.
Crowcon Gasflag – Single Channel Monitor.
Capable of monitoring one 4-20mA flammable, toxic or oxygen gas detector.
Can be used in LPG Monitoring or locations with 1 Gas Detector.
3 Relay Outputs – For Alarm 1, Alarm 2 & Fault Relay Activation.
Rising & Falling Alarm Setpoints for Oxygen Detectors.
Two Rising Alarms for Flammable & Toxic Detectors.
Can be used for any 4-20mA Analog Gas Detector.
IP-20 Protection – Basic Protection from Dust.
Contact us for more information.
Crowcon Gasman – Portable Single Gas Detector
Single Gas Detector – To Detect Single Gas.
Built in 95dB Alarm and easy to read display.
IP 65 rated – To prevent dust & water ingress.
Internal vibration during Alarm to alert user.
Available with Rechargeable & Non-Rechargeable.
Available in Several Toxic & Flammable Gas Options.
Contact us for more information.
Crowcon Gasmaster – 1-4 Channel Control Panel.
Capable up-to 4 Oxygen or Toxic Gas Detectors.
Each detector assigned 2 levels of independent alarm.
Push buttons and LED Display enable easy operation.
Functional Certification & Capable – SIL 2 Certified.
Battery Backup – For operation in case of power failure.
Fire Alarm Control Panel Integration & Networking.
RS-485 MODBUS RTU – Network & BMS Integration.
Event Logger – To Measure, Fire, Gas & Fault Alarms.
Contact us for more information.
LaserMethane Smart – Compact Methane Gas Detector
Shoots Laser at an Inspection Point
Logs measured value to an image and time.
Can be used at a distance of 30m Away.
Green Laser can also be used Outdoors.
Laser Beam uses IR Rays to obtain value.
Includes Bluetooth (Optional) & MicroSD.
For use with Methane or Natural Gases.
Range: 1 – 50,000 ppm.
Response Time in 0.1s
IP 54 Rated
Explosion Proof
Contact us for more information.
Multiscan 8+ Gas Panel.
Monitor up-to 16 Gas Detectors – Conventional & Addressable.
8 Conventional Gas Detector + 8 Addressable Gas Detector (RS485).
Support for 4-20mA Analog Signals & RS-485 MODBUS.
Event logging – For Alarm Monitoring & Signal Activation.
Battery back-up – Ensure Gas Detection is on in case of power failure.
Contact us for more information.
Crowcon Multiscan++S2 Gas Control Panel
SIL 2 Certified for use in demanding areas.
Monitor & manage up-to 256 Gas Detectors.
Enclosure: ABS or Aluminium Rack
Support for 16 / 32 / 64 / 128 / 256 Inputs.
Support for 32 / 64 / 128 / 256 / 516 Outputs.
Internal Self-Test to detect failures.
Available in Panel & Rack Mount for use in custom racks.
Galvanic isolated loops for hazardous area installation.
Digital Communication between detectors.
Explosion Proof Certified for use in Hazardous Areas.
Built in event log & Status LED.
Contact us for more information.
Crowcon Environmental Sampling Unit / Sampling Gas Detector.
Low-cost Air Sampling Unit for HVAC & other critical Equipment.
Detection of toxic / flammable gases in hot, humid or dusty environments.
Single Point / Multi Point / Sequential / Aspirated Sample System.
Low & High Alarms signals to program Relays for Shutdown / AV Units.
Single Point – Gas Detector using Pellistor / IR Sensor for High Temps.
Multi Point – Made of Multiple Point for Environmental Gas Monitoring.
Engineered / Customized Solutions available certified for Hazardous Areas (with 1, 2 or 3 sensors) and Non-Hazardous Areas. Can be programmed for executive action based on detection from multiple detectors.
Contact us for more information.
Smart 3-R Gas Detector – For Flammable, Toxic & Oxygen Detection
Smart 3-R Lite Gas Detector – Refrigerant Detection
Multi-Colour LED Ring provides aesthetic visual indication.
Available with a variety of gas sensors & detection.
4-20mA Analog Signal – Integration with Gas Panel / PLC.
Contact us for more information.
SMART 3G-C2 Fixed Gas Detector
Capable of detecting more than 50 types of Gases.
Toxic, Flammable, Oxygen & Refrigerant Gases.
Built-in Self Diagnosis for Fault Identification.
SIL 2 Certified.
ATEX Certified for use in Explosive Areas.
IP 65 Rated with Aluminium Enclosure.
Contact us for more information.
SMART 3G-D2 Fixed Gas Detector.
Can be used for flammable, toxic & refrigerant gases.
SIL 2 Certified & ATEX Certified for use in Explosion Proof Areas.
Non-intrusive Calibration using Magnetic keys.
Capable of SIL 3 Certification with applicable system.
Intrinsically Safe Version Available.
IP 65 Ingress Protection.
LCD Display, 5 Status LED & 4 Indicator LED.
4-20mA Analog Outputs & RS485 Addressable Output.
Green LED Ring around Display for Alarm Status Indication.
Contact us for more information.
SMART S-MS 3A Fixed Gas Detector.
Can be used for Flammable & Toxic Gases.
SIL 2 Approved.
Redundant system ensures SIL 3 Certification.
IP 65 Protection & Explosion Proof.
Enclosure: Aluminium or SS
3 Relay Outputs for AL1, AL2 & Fault.
Optional HART.
Contact us for more information.
Crowcon T4 – Multi Gas Portable Detector
Can be used to detect CO, H2S, Flammable & Oxygen.
Intuitive Menu System & Large Buttons.
Detection of most common gas hazards in enclosed spaces.
IP 65 & IP 67 rated – to prevent dust & water ingress.
18 Hour Battery – For Prolonged Use.
Ensure regular bump test & calibration.
Contact us for more information.
TXgard Plus – Flameproof Toxic & Oxygen Gas Detector
Local LCD Display for menu & magnetic key operation.
Explosion Proof – ATEX Certified for use in Hazardous Areas.
Non-Intrusive Calibration with custom Magnetic Key.
Added Fault & Alarm Relays – For Signaling & Alarm.
IP65 Protection for use in outdoors – dust & water.
Contact us for more information.
Crowcon Vortex – Gas Control Panel.
Capable up-to 12 Oxygen, Toxic or Flammable Gas Detectors with (including 3 for Fire).
Each detector assigned 1 Fault Level & 3 Alarm Levels to trigger up-to 32 output relays.
Push buttons and LED Display enable easy operation – Real Time Gas Readings of Detectors.
Can be integrated with Manual Call Points & Other Safety Systems – Support for Fire Loops.
SIL 1 Certified – for use with Safety Instrumented Systems – Functional Safety & Integrity.
Battery Backup & MODBUS, RS-485 Integration – For BMS & Scada Integration – Networking.
Available in Wall Mount, 19″ Rack mount, Panel Mount – For all site requirements & design.
Custom design based for site approved design – for client’s custom PLC Board & Equipment.
Contact us for more information.
Crowcon Vortex FP – Flameproof Gas Panel
Used in Hazardous areas – both onshore & offshore
Flameproof Gas Detector Control Panel
Made with LM25 Aluminium with polyester powder coating.
Support for up-to 12 Gas Detector (including 3 loops for fire – up-to 20 devices per loop)
Capable of up-to 32 relay outputs.
RS-485 MODBUS or PROFIBUS
Store up-to 300 alarm, power, fault, system events.
ATEX Certified – for use in Explosion Proof Areas
Available in FP or FP Compact
Contact us for configuration & consult.
Crowcon Vortex FP Compact – Flameproof Gas Panel
Used in Hazardous areas – both onshore & offshore.
Flameproof Gas Detector Control Panel.
Made with LM25 Aluminium with polyester powder coating.
Support for up-to 12 Gas Detector (including 3 loops for fire – up-to 20 devices per loop)
Capable of up-to 16 relay outputs – For Signaling, Fire Panel & PLC Integration.
RS-485 MODBUS or PROFIBUS – For BMS & SCADA Integration – Networking.
Event Logger – Store up-to 300 alarm, power, fault, system events.
Explosion Proof – ATEX Certified for use in hazardous areas.
Available in FP or FP Compact – Different Sizes & Designs.
Contact us for configuration & consult.
XgardIQ – Fixed Addressable Gas Detector.
Used to detect flammable, toxic, oxygen or High Temperature H2S.
Infrared Sensors Available for Accurate Flammable Gas Detection.
IP 66 Ingress Protection – To prevent Water & Dust Ingress.
Remote Sensor Assembly Kits Available for Remote Sensor Placement.
Explosion Proof – ATEX Certified for use in Hazardous Areas.
SIL 2 Certified – For Performance & Equipment Integrity with DCS.
Local OLED Display – Clear & Bright Readings even in sunlight.
Enclosure: 316 SS – Corrosion Proof & Rust Proof in salty atmospheres.
Output: 4-20mA Signals & RS-485 MODBUS RTU – Analog & Digital.
Non-intrusive Calibration – Button Controls for quick and easy use.
Hot Swappable Sensors – Does not require Hot Work Permit.
LED Indicators for Detector Status, Fault & Power Indication.
Event logger – To measure continuous gas monitoring.
Contact us for more information.
Crowcon Xgard Fixed Gas Detector
Xsafe – 1kg
ATEX Certified Fixed Gas Detector
Low-cost reliable Gas Detector
Aluminium Enclosure.
Ability to detect several ranges of flammable gases.
Hydrogen, LPG, Methane, Ammonia & Other Organics.
4-20mA Analog Signals – PLC & Plant Integration.
Contact us for more information.
ㅤ(+974) 5584 7568 / 3384 5147 ㅤㅤ
ㅤㅤㅤㅤ ㅤㅤ 
ㅤsales@crowngasqatar.com
ㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤ 
ㅤ(+974) 3384 5147
