Leak Detectors

Handheld Portable Leak Detector – For LPG Lines Valves & Leak Detection – Medical Gas Piping System Leak Detection – Lab Gas Piped Leak Detection – HVAC Leak Detection – Ultrasonic Leak Detection

Showing all 22 results

  • Aspirating Gas Detector

    • Aspirating Gas Detector – Sampling Type Detection.
    • Aspirating Gas Detection System – Integrated Control.
    • Detect toxic and flammable gases by air sampling.
    • Flammable Gas, Toxic Gas & Oxygen Level Monitoring.
    • Gas detectors are available with gas pump for air sample.
    • Special gas pumps are chemical resistant for toxic gases.
    • Explosion proof (ATEX) pumps are used for flammable gases.
    • Pumps are made from chemically resistant material and design.
    • Air flow, vacuum pumps & sensor to be used as per requirement.
    • HVAC Ducts requires specialized venturi effect aspirating units.
    • Gas Detectors for HVAC Ducts require specialized kits as required.
    • Contact us for more information on aspirating gas detectors.
  • Calibration Gas Cylinder & Regulator

    • Specialty Mixed Calibration Gas
    • Included Regulator & PVC Hose
    • Additional Accessories / Calibration Equipment
    • Included Analytical Certificate with Calibration Cylinder.
    • Regulator 0.5L/min or 1L/min – Brass for Flammable Gas & SS for H2S.
    • Different Gas Mix Available – Flammable, Oxygen & Toxic.
    • Contact us for more information.
  • Chemical Leak Detection System

    • Chemical Leak Detection System – For Acids and Bases.
    • Sensor is of a cable type and can identify leaks of chemicals.
    • The presence of acids, bases and conductive liquids is known.
    • Cable has been tested for chemical resistance against several acids.
    • Sensing cables can be used in chemical storage tanks and labs.
    • Cable is resistant to damage from any harsh chemicals or liquids.
    • Cable is resettable and reusable upon drying with custom levels.
    • Controllers available to monitor leak at any point of the cable length.
    • Contact us for more information.
  • CO2 Leak Detector

    • IAQ8494 Ambient CO2 Detector
    • Handheld Device to measure CO2 levels.
    • Can be used to measure CO2 Leaks in MGPS.
    • CO2 Gas Lines – Leak Detection and Point Sources.
    • 0 – 9,999ppm level reading.
    • Backlit display & adjustable audible alarm.
    • Capable of measuring ambient temperature.
    • Includes Adaptor & carry case.
    • Contact us for more information.
  • Diesel Fuel Leak Detection System

    • Diesel Fuel Leak Detection System – For Generator & Tank Areas.
    • Explosion Proof (ATEX) Rated Sensor for detection of Fuel Oils.
    • Intrinsically safe for use in hazardous atmospheres.
    • Sensor to be surface mounted on level platforms or leak sites.
    • Sensor certified for Ex II 1 Ex ia T4 Ga for use in Zone 1 Areas.
    • Control Panel / Controller available to monitor oil leaks & alarms.
    • Optional sounder to be mounted for alarm & oil spill measures.
    • Contact us for more information.
  • Diesel Leak Detectors

    • Diesel Leak Detectors to detect passive diesel spills & leaks.
    • ATEX Certified Explosion Proof Sensors for use in hazardous areas.
    • Sensor is intrinsically safe type for integration to systems.
    • Surface mounted near generator and diesel storage tanks.
    • Fuel caught under the sensor will trigger sensor and alarm.
    • Complete system with control panel available for diesel leaks.
    • Safe area type units available for use in non-hazardous areas.
    • Sensor is of weatherproof type – can be mounted outdoors.
    • Contact us for more information.
  • Fire and Gas Mapping

    Crowngas Detection System Offers 3D Fire And Gas Mapping Services.

    • 3D Depictions of Flame & Gas Detectors & their Effective Coverage.
    • Detection & Coverage for any Flame & Gas Detectors in the market.
    • Coverage to be based on manufacturer design specifications.
    • Optimal positioning & software optimization for installed detectors.
    • Support for 3D CAD Files – for direct & seamless integration.
    • Support for 2D CAD Files as well for Gas & Flame Detector Coverage.
    • Conversion of 2D to 3D CAD along with Detector Position.
    • 3D Field Coverage of Hazardous Field Layout by Gas & Flame Detector.
    • 3D Coverage of Process Equipment & Tanks by Gas & Flame Detector.
    • Used to determine congestion/overlap of detector coverage in any area.
    • Detectors based on manufacturer datasheet & information/field data.
    • Compliant with Shell DEP 32.30.20.11 Performance Standards.
    • Hazards or events (fire sizes & gas clouds) to be identified & provided.
    • Performance targets for the F&G Mapping based on the hazards known.
    • Comprehensive reports, data & zone coverage based on final drawings.
    • Contact us for more information.

     

  • Flammable Gas Leak Detector

    • AGP 45 Flammable Gas Leak Detector
    • Handheld Detector – Pinpoint Flammable Leak Sources
    • Adjustable Tick Rate & Sensitivity Increases on Leak
    • Includes Audible & Visual Alarm Indicators
    • Contact us for more information.
  • Fuel Oil Leak Detection System

    • Fuel Oil Leak Detection System – Flammable Fuel Detection.
    • Explosion Proof (ATEX) Rated Sensor for detection of Fuel Oils.
    • ATEX units are intrinsically safe for use in hazardous atmospheres.
    • Sensor certified for Ex II 1 Ex ia T4 Ga for use in Zone 1 Areas.
    • Safe Area Sensor for detection of Flammable Fuel Oils.
    • Safe Area Sensor are Weatherproof – IP65 for outdoor mounting.
    • Sensor to be surface mounted on level platforms or leak sites.
    • Optional Wall mounting type stainless steel bracket available.
    • Relay outputs for direct PLC / BMS / Controller Integration.
    • Optional sounder to be mounted for alarm & annunciation.
    • Contact us for more information.
  • Gastec Detector Tube Pump

    • Gastec Detector Tube Pump.
    • Gastec Gas Sampling Pumps to be used for air sampling.
    • Pumps are intrinsically safe, pre-calibrated and reliable.
    • Detector tube pumps with optional counter for pump count.
    • Tube to be used with Gastec Detector Tubes for gas analysis.
    • Pre-calibrated 50mL and 100mL strokes for accurate testing.
    • Built-in tip breaker for Gastec detector tubes for convenience.
    • Built-in Flow Finish Indicator ensures completion of stroke.
    • Accessories include extension hose, probe holder, extension pole.
    • Pump handles have markers for full and half stroke (100ml / 50ml).
    • Contact us for more information.
  • Gastec Detector Tubes

    • Gastec Detector Tubes.
    • Spot measurement of single gas in atmosphere.
    • Available for a wide range of toxic and flammable gases.
    • Offered tubes are to be used with Gastec Pump.
    • Tubes available in wide variety of scale and units.
    • Tubes need to be kept in cool environment.
    • Gastec Detector have shelf life from factory.
    • Gastec tubes can be used in any environment.
    • Smoke detector tubes used for analyzing air.
    • Detect several kinds of airborne gases / vapors.
    • Gas detector tubes can be used to detect pollutants.
    • Sampling tubes available for over 300 toxic gases.
    • Fume hood confined space gas or CSHHH assessments.
    • Made in Japan – SEI Certified Gas Detector Tubes.
    • Contact us for more information.
  • Hochiki LEAKalarm – Water Leak Detection

    • Hochiki LEAKalarm – Water Leak Detection System
    • Linear Detection (Wire Type) & Point Detection (Probe Type)
    • Types: Conventional System & Addressable System.
    • Conventional System: 2, 4 & 8 Zone Panels.
    • Addressable System: 2 Loop support for 25km Linear or 500 Probe Type.
    • BMS Integration & Relay Outputs / Contacts for FACP Integration.
    • Built-in Battery Backup & Fault Monitoring with Event Logs.
    • Voice Sounder for Water Leak (Custom Message Support)
    • Blue Beacon for Water Leak or Blue Remote LED Indicator.
    • Blue Manual Call Points for Shutdown of Plant Valves.
    • Site Specific Accessories & Design Elements for installation.
    • For use in Water Sensitive Equipment & Thermal Storage Tank.
    • Contact us for more information.
  • Intrinsically Safe Equipment

    • Crowngas offers Intrinsically Safe Equipment (I.S) Certified.
    • Intrinsically Safe Equipment can be used with Safety Barrier.
    • MTL or P&F Pepperl+Fuchs Galvanic Isolator or Zener Barrier.
    • Intrinsically Safe Flasher – For Fire & Gas Alarm Visual Signal.
    • Intrinsically Safe Beacon – For Fire & Gas Alarm Visual Signal.
    • Intrinsically Safe Sounder – For Fire & Gas Alarm Audio Signal.
    • Intrinsically Safe Sounder Flasher – For Audio Visual Signaling.
    • Intrinsically Safe Pushbuttons – For Hazardous Area Initiation.
    • Intrinsically Safe Flammable Fixed Gas Detectors – Pellistor Type.
    • Intrinsically Safe Point Type Flammable Gas Detectors – Infrared.
    • Intrinsically Safe Toxic Gas Detectors – Electrochemical Sensors.
    • Intrinsically Safe Manual Call Points (MCP) – For Hazardous Area.
    • Intrinsically Safe Break Glass MCP – For Hazardous Area Fire Alarm.
    • Intrinsically Safe Smoke Detectors – Conventional Fire Alarm Systems.
    • Intrinsically Safe Heat Detectors – Conventional Fire Alarm Systems
    • Intrinsically Safe LHD – Linear Heat Detector Cables for FA Systems.
    • Intrinsically Safe HART Monitors – For Analog Transmitter Equipment.
    • Suitable Safety Barriers to be used as specified by Manufacturer.
    • Contact us for more details.
  • LaserMethane Smart

    • LaserMethane Smart – Compact Methane Gas Detector
    • Shoots Laser at an Inspection Point
    • Logs measured value to an image and time.
    • Can be used at a distance of 30m Away.
    • Green Laser can also be used Outdoors.
    • Laser Beam uses IR Rays to obtain value.
    • Includes Bluetooth (Optional) & MicroSD.
    • For use with Methane or Natural Gases.
    • Range: 1 – 50,000 ppm.
    • Response Time in 0.1s
    • IP 54 Rated
    • Explosion Proof
    • Contact us for more information.
  • Oil Leak Detectors

    • Fuel Oil Leak Detectors.
    • Sensors can be used to identify oil leaks and fuel leaks.
    • Passive leak detectors are mounted under the fuel tanks.
    • Sensors have adjustable height for accurate identification.
    • Surface mount or wall mount type brackets available.
    • System is available with control panel and accessories.
    • System can be seamlessly integrated into third party systems.
    • Contact us for more information.
  • Petrol Leak Detection System

    • Petrol Leak Detection System for use near Petrol Storage Tanks.
    • Explosion Proof (ATEX) Rated Sensor for detection of Fuel Oils.
    • Intrinsically safe for use in hazardous atmospheres.
    • Sensor to be surface mounted on level platforms or leak sites.
    • Sensor certified for Ex II 1 Ex ia T4 Ga for use in Zone 1 Areas.
    • Control Panel / Controller available to monitor oil leaks & alarms.
    • Optional sounder to be mounted for alarm & annunciation.
    • Contact us for more information.
  • Portable Water Leak Detector

    • Portable Water Leak Detector – Battery Powered.
    • Kidde Water Leak & Freeze Detector for small facilities.
    • Unit can be placed under sinks, toilets, fridges or heaters.
    • Detects leaks or flooding and alerts the facility owner.
    • Unit has a built-in buzzer for alerting local staff or owner.
    • Detector can be interfaced to a local phone app via Wi-Fi.
    • Mobile notification is sent via Wi-Fi for alerting and action.
    • IP 65 Ingress Protection – Unit can be wiped and reused.
    • Contact us for more information.
  • Refrigerant Leak Detector

    • Refrigerant Leak Detector.
    • Easily detect refrigerant leaks.
    • Detectable Refrigerants – R-22, R134a, R-404A, R-410A, R-507, R438A, major CFCs, HFCs & HCFCs.
    • Replaceable batteries for 16 hours continuous use.
    • Highly sensitive to refrigerant gases.
    • High/low sensitivity adjustment option.
    • LED indicator and audible alarm for refrigerant leak.
    • Automatic zeroing & rugged enclosure for long use.
    • Contact us for more information.
  • VPE Ultrasonic Leak Detector

    • Accutrak VPE Ultrasonic Leak Detector
    • Detector Pressure & Vacuum Leaks of any gas
    • Designed for pinpointing leaks in AC, HVAC, Refrigeration, MGPS & Other Systems.
    • Identify leaks from manifold to PID & more.
    • Captures ultrasonic sound of gas leak.
    • Detect leaks in valves & thermal expansion.
    • 9V Battery – 200 Hours of Operation.
    • Capable of detecting 5 psi leak from 0.005″ hole.
    • Capable of detecting leaks for CA (Compressed Air) & Nitrogen.
    • Equipment not affected by strong windows / gas / refrigerant during operation.
    • Several types of accessories improve capability of early leak detection.
    • Comes in Basic Kit, Standard Kit, Professional Kit, Plus & Pro-Plus kit.
    • Contact us for more information.
  • Water Leak Detection System

    • Vimpex Hydrosense Water Leak Detection System
    • Linear Detection (Wire Type) & Point Detection (Probe Type)
    • Types: Conventional System & Addressable System.
    • Conventional System: 2, 4 & 8 Zone Panels.
    • Addressable System: 2 Loop support for 25km Linear or 500 Probe Type.
    • BMS Integration & Relay Outputs / Contacts for FACP Integration.
    • Built-in Battery Backup & Fault Monitoring with Event Logs.
    • Voice Sounder for Water Leak (Custom Message Support)
    • Blue Beacon for Water Leak or Blue Remote LED Indicator.
    • Site Specific Accessories & Design Elements for installation.
    • For use in Water Sensitive Equipment & Thermal Storage Tank.
    • Contact us for more information.
  • Water Leak Detector

    • Water Leak Detector – Sensor Probe or Cable Type.
    • Used to detect leaks in chilled water lines or drainage.
    • Probe type sensors are used to detect leaks in FCU unit.
    • Fixed Tanks have passive leak detection systems within.
    • Comprehensive detection of water leak in your facility.
    • Our systems are capable for support up-to 3 KM sensing.
    • Probe type sensors are available with volt free relay output.
    • Wireless Water Leak Detection System as per site design.
    • Water Leak Detection Systems are industry specific & reliable.
    • Distance read type systems for pin-pointing location of leak.
    • Water leak detection is ideal for use in data centers & servers.
    • Early detection of water leak in critical facilities is recommended.
    • Systems have outputs for BMS, BACnet, SMTP & relay outputs.
    • Contact us today for a free consult.
  • Wireless Control Systems

    • Wireless Control Systems – For Existing Facilities.
    • Facility Monitoring Systems are ideal for cable free installation.
    • Wireless Control systems for commercial & industrial use cases.
    • Systems involve a transmitter with each unit and a receiver.
    • Receiver shall have an antenna to interface every transmitter.
    • Wireless transmitters have a battery life of over 10 years.
    • Wireless temperature sensors & monitoring systems.
    • Wireless temperature & humidity sensors & monitoring.
    • Wireless Water Leak Detection System – Linear Cable Type.
    • Wireless Water Leak Detection System – Probe / Point Type.
    • Wireless Transmitter – Receives wired NO or NC digital input.
    • Wireless Transmitter – Receives Analog 4-20mA Analog input.
    • Wireless Gas Detection System – For Indoors & Outdoors.
    • Wireless Systems can be of Wi-Fi type or Radio Frequency Type.
    • Receiver Systems can integrate into BMS via Modbus or BACnet.
    • Custom mapping features display status of wireless transmitters.
    • Wireless Systems can be used to fine tune your facility management.
    • Contact us for more information.