Skip to content
-
- Car Park CO Gas Detector – Continuous Monitoring of CO Levels.
- Continuous monitoring of carbon monoxide (CO) Gas Levels.
- Fast response for early hazard detection & CO Gas accumulation.
- Addressable & Conventional CO Gas Detection Systems available.
- Automatic ventilation control configured based on CO gas levels.
- Provision for integration to jet fan, exhaust & fresh air systems.
- Optional NO2 (nitrogen dioxide) monitoring for diesel engines.
- Outputs: 4-20mA, MODBUS RS485 or Dry Control Relays available.
- Standalone detectors available for direct BMS/BAS/PLC Integration.
- Contact us for more information.
-
- Fuel Leak Detection for Packaged Generator Container Sets.
- Continuous monitoring for fuel (diesel) from tanks, piping etc.
- Early detection & warning system to prevent fire hazard.
- Prevent environmental contamination & equipment damage.
- Available for wide variety of diesel, fuel oil & hydrocarbon liquids.
- Highly reliable hydrocarbon sensing cable for perimeter coverage.
- Point Leak detectors for areas requiring precise location/sump pits.
- Real-time alarm indication/signaling to third party control systems.
- Contact us for more information.
-
- Indoor Air Quality Monitors – Fixed IAQ Monitors.
- Measure CO2, Dust (PM), Volatile Compounds (VOC).
- Particulate Matter Sensors – PM1, PM2.5 & PM10.
- Volatile Compounds (VOC) & Carbon Dioxide (CO2).
- Comply to Industry Standard Quality & Performance.
- Suitable for high temperature & humid environments.
- Ensure comprehensive indoor air quality assessment.
- Designed for healthy air quality & occupant well-being.
- Contact us for more information.
-
- Indoor CO2 Monitors – Track Carbon Dioxide Levels.
- Additional Temperature & Humidity Sensor Options.
- Measure Vital CO2 Levels & Other parameters inside.
- Available with analog, digital & outputs as required.
- Detector can be used standalone or networked.
- Integrate into HVAC or any control system as required.
- Optional Display Screen or LED Indicator Version.
- Suitable for residential, public & commercial facilities.
- Compliant to industry standard practices & performance.
- Contact us for more information.
-
- Laboratory Gas Leak Detection System – Continuous Monitoring.
- Designed for laboratories handling hazardous & specialty gases.
- Suitable for detection of toxic, flammable gas & O2 monitoring.
- Continuous 24/7 monitoring to ensure safe working environment.
- Automatic shutdown / interlocking with gas supply systems / SOV.
- Suitable for university & research laboratories, cleanrooms & labs.
- Pharmaceutical labs, oil & gas testing laboratories, chemical labs.
- Contact us for more information.
-
- Leak Detection System for Data Center – For Asset Protection.
- Accurate & Fast Leak Detection System for Data Center & Server Rooms.
- Early detection of water leaks to prevent downtime or equipment damage.
- Configured outputs for audio / visual alarms, MODBUS RS485 or relays.
- Suitable for both raised floor & non-raised floor installation set-ups.
- Probe type sensor for leak monitoring in CRAC/CRAH units & AHU’s.
- Corrosion proof leak sensors for use in condensate drain & drip trays.
- Fault monitoring of system for breaks in cable length or any damage.
- Precise monitoring with leak location identification & location display.
- Contact us for more information.
-
- Probe Type Water Leak Sensor with Alarm Switch Relay.
- Can be used to detect presence or absence of water.
- Built-in LED Indicator with Green & Red LED Indication.
- Pre-wired 1.8m 5C cable for direct integration to system.
- Optional mounting holes for screwing unit in place.
- Enclosure: 304 Stainless Steel, highly corrosion proof.
- Ideal for use in AHU (Air Handling Units) & Drain Pans.
- Suitable for use in FCU (Fan Control Units) Drip Trays.
- Suitable for detection of condensate build-up in panels.
- Contact us for more information.
-
- Pump Room Water Leak Detector – Standalone System.
- Protect your Plant Rooms & Assets from Rising Water.
- Suitable for Fire Pump Rooms – For Sump Pits Flooding.
- Safeguard your critical assets using our leak system.
- Retrofit existing utility & infrastructure with our system.
- Probe type controller for monitoring pits & floods.
- Cable leak sensor for perimeter protection of assets.
- Audio/Visual Alarm, SMS & Automated Calls on alarm.
- Contact us for more information.
-
- Refrigerant Gas Detectors – Standalone Sensor Unit.
- Gas Detection for Industrial Refrigeration Systems.
- Detect Ammonia (R717), CO2 (R744), HCFC & HFCs.
- Detector capable to detect wide range of gases.
- Detector is suitable for fixed installation in field.
- LCD Display with real time gas readouts & alarm.
- Pre-configured Alarm Levels as per ASHRAE 15 2022.
- Detect R134a, R22, R410a & other refrigerant gases.
- Integrated Dry Contact Relay for Alarm & Signaling.
- Contact us for more information.
-
- Refrigerant Leak Detection System – Fixed Installation.
- Detection of refrigerant gases emanating from HVAC.
- Refrigerant Gas Detectors are to be installed near leaks.
- Suitable for use in chiller rooms & mechanical rooms.
- Refrigerant Detectors shall activate the leak extract fans.
- Activation to solenoid valves or alarm & visual signals.
- Signaling to chiller plant management & ventilation.
- Detect wide range of freons, HFCs, CFCs & NH3 gas.
- Optional integration to BMS or Fire Alarm System.
- Detection of a wide variety of refrigerant gases.
- Contact us for more information.
-
- Water Detection System – For Data Center & Pump Rooms.
- Customized leak sensing cable for large area coverage.
- Probe type sensors for leak detection in sump pits & outdoors.
- Relay Outputs Available – For Executive Action & Signaling.
- From small systems (3m cable) to large (3000m) systems.
- Outputs: BMS, BACnet, PLC, SCADA & Integration Features.
- Wireless Water Leak Detection System for existing facility.
- Detects Water Ingress & Initiates Signaling – Linear Wire.
- To be used in Areas with Sensitive Electrical Equipment.
- Server Rooms, Battery Rooms, Switchgear & Storage Areas.
- Contact us for more information.
-
- Water Leak Detector – Leak Sensing Cable for Large Areas.
- Used to detect leaks in chilled water lines or drip pans.
- Probe type sensors are used to detect leaks in FCU unit.
- Comprehensive detection of water leak for every facility.
- From small standalone systems to highly networked solutions.
- Distance read type systems for pin-pointing location of leak.
- Early detection of water leak in critical facilities is recommended.
- Systems have outputs for BMS, BACnet, SMTP & relay outputs.
- Contact us today for more information.
ㅤ(+974) 5584 7568 / 3384 5147 
ㅤsales@crowngasqatar.com 
ㅤ(+974) 3384 5147
