Skip to content
-

- Aspirating Gas Detector – Sampling Type Detection.
- Gas Detection integrated with sampling systems.
- Detect toxic and flammable gases by air sampling.
- Flammable Gas, Toxic Gas & Oxygen Level Monitoring.
- Special gas pumps are chemical & corrosion resistant.
- Explosion proof (ATEX) pumps used for flammable gases.
- HVAC Ducts requires specialized venturi effect aspirating units.
- Gas Detectors for HVAC Ducts require specialized kits as required.
- Contact us for more information on aspirating gas detectors.
-

- Chemical Leak Detection System – For Acids and Bases.
- Sensor is of a cable type and can identify leaks of chemicals.
- The presence of acids, bases and conductive liquids is known.
- Cable has been tested for chemical resistance against several acids.
- Sensing cables can be used in chemical storage tanks and labs.
- Cable is resistant to damage from any harsh chemicals or liquids.
- Cable is resettable and reusable upon drying with custom levels.
- Controllers available to monitor leak at any point of the cable length.
- Contact us for more information.
-

- IAQ8494 Ambient CO2 Detector
- Handheld Device to measure CO2 levels.
- Can be used to measure CO2 Leaks in MGPS.
- CO2 Gas Lines – Leak Detection and Point Sources.
- 0 – 9,999ppm level reading.
- Backlit display & adjustable audible alarm.
- Capable of measuring ambient temperature.
- Includes Adaptor & carry case.
- Contact us for more information.
-

- Diesel Fuel Leak Detection System – For Generator & Tank Areas.
- Explosion Proof (ATEX) Rated Sensor for detection of Fuel Oils.
- Intrinsically safe for use in hazardous atmospheres.
- Sensor to be surface mounted on level platforms or leak sites.
- Sensor certified for Ex II 1 Ex ia T4 Ga for use in Zone 1 Areas.
- Control Panel / Controller available to monitor oil leaks & alarms.
- Optional sounder to be mounted for alarm & oil spill measures.
- Contact us for more information.
-

- Diesel Leak Detectors to detect passive diesel spills & leaks.
- ATEX Certified Explosion Proof Sensors for use in hazardous areas.
- Sensor is intrinsically safe type for integration to systems.
- Surface mounted near generator and diesel storage tanks.
- Fuel caught under the sensor will trigger sensor and alarm.
- Complete system with control panel available for diesel leaks.
- Safe area type units available for use in non-hazardous areas.
- Sensor is of weatherproof type – can be mounted outdoors.
- Contact us for more information.
-

- AGP 45 Flammable Gas Leak Detector
- Handheld Detector – Pinpoint Flammable Leak Sources
- Adjustable Tick Rate & Sensitivity Increases on Leak
- Includes Audible & Visual Alarm Indicators
- Contact us for more information.
-

- Fuel Oil Leak Detection System – Flammable Fuel Detection.
- Explosion Proof (ATEX) Rated Sensor for detection of Fuel Oils.
- ATEX units are intrinsically safe for use in hazardous atmospheres.
- Sensor certified for Ex II 1 Ex ia T4 Ga for use in Zone 1 Areas.
- Safe Area Sensor for detection of Flammable Fuel Oils.
- Safe Area Sensor are Weatherproof – IP65 for outdoor mounting.
- Sensor to be surface mounted on level platforms or leak sites.
- Optional Wall mounting type stainless steel bracket available.
- Relay outputs for direct PLC / BMS / Controller Integration.
- Optional sounder to be mounted for alarm & annunciation.
- Contact us for more information.
-

- Gastec Detector Tube Pump.
- Gastec Gas Sampling Pumps to be used for air sampling.
- Pumps are intrinsically safe, pre-calibrated and reliable.
- Detector tube pumps with optional counter for pump count.
- Tube to be used with Gastec Detector Tubes for gas analysis.
- Pre-calibrated 50mL and 100mL strokes for accurate testing.
- Built-in tip breaker for Gastec detector tubes for convenience.
- Built-in Flow Finish Indicator ensures completion of stroke.
- Accessories include extension hose, probe holder, extension pole.
- Pump handles have markers for full and half stroke (100ml / 50ml).
- Contact us for more information.
-

- Gastec Detector Tubes.
- Spot measurement of single gas in atmosphere.
- Available for a wide range of toxic and flammable gases.
- Offered tubes are to be used with Gastec Pump.
- Tubes available in wide variety of scale and units.
- Tubes need to be kept in cool environment.
- Gastec Detector have shelf life from factory.
- Gastec tubes can be used in any environment.
- Smoke detector tubes used for analyzing air.
- Detect several kinds of airborne gases / vapors.
- Gas detector tubes can be used to detect pollutants.
- Sampling tubes available for over 300 toxic gases.
- Fume hood confined space gas or CSHHH assessments.
- Made in Japan – SEI Certified Gas Detector Tubes.
- Contact us for more information.
-

- Hochiki LEAKalarm – Water Leak Detection System
- Linear Detection (Wire Type) & Point Detection (Probe Type)
- Types: Conventional System & Addressable System.
- Conventional System: 2, 4 & 8 Zone Panels.
- Addressable System: 2 Loop support for 25km Linear or 500 Probe Type.
- BMS Integration & Relay Outputs / Contacts for FACP Integration.
- Built-in Battery Backup & Fault Monitoring with Event Logs.
- Voice Sounder for Water Leak (Custom Message Support)
- Blue Beacon for Water Leak or Blue Remote LED Indicator.
- Blue Manual Call Points for Shutdown of Plant Valves.
- Site Specific Accessories & Design Elements for installation.
- For use in Water Sensitive Equipment & Thermal Storage Tank.
- Contact us for more information.
-

- LaserMethane Smart – Compact Methane Gas Detector
- Shoots Laser at an Inspection Point
- Logs measured value to an image and time.
- Can be used at a distance of 30m Away.
- Green Laser can also be used Outdoors.
- Laser Beam uses IR Rays to obtain value.
- Includes Bluetooth (Optional) & MicroSD.
- For use with Methane or Natural Gases.
- Range: 1 – 50,000 ppm.
- Response Time in 0.1s
- IP 54 Rated
- Explosion Proof
- Contact us for more information.
-

- Petrol Leak Detection System for use near Petrol Storage Tanks.
- Explosion Proof (ATEX) Rated Sensor for detection of Fuel Oils.
- Intrinsically safe for use in hazardous atmospheres.
- Sensor to be surface mounted on level platforms or leak sites.
- Sensor certified for Ex II 1 Ex ia T4 Ga for use in Zone 1 Areas.
- Control Panel / Controller available to monitor oil leaks & alarms.
- Optional sounder to be mounted for alarm & annunciation.
- Contact us for more information.
-

- Portable Water Leak Detector – Battery Powered.
- Kidde Water Leak & Freeze Detector for small facilities.
- Unit can be placed under sinks, toilets, fridges or heaters.
- Detects leaks or flooding and alerts the facility owner.
- Unit has a built-in buzzer for alerting local staff or owner.
- Detector can be interfaced to a local phone app via Wi-Fi.
- Mobile notification is sent via Wi-Fi for alerting and action.
- IP 65 Ingress Protection – Unit can be wiped and reused.
- Contact us for more information.
-

- Refrigerant Leak Detector.
- Easily detect refrigerant leaks.
- Detectable Refrigerants – R-22, R134a, R-404A, R-410A, R-507, R438A, major CFCs, HFCs & HCFCs.
- Replaceable batteries for 16 hours continuous use.
- Highly sensitive to refrigerant gases.
- High/low sensitivity adjustment option.
- LED indicator and audible alarm for refrigerant leak.
- Automatic zeroing & rugged enclosure for long use.
- Contact us for more information.
-

- Water Detection System – For Data Center & Pump Rooms.
- Customized leak sensing cable for large area coverage.
- Probe type sensors for leak detection in sump pits & outdoors.
- Relay Outputs Available – For Executive Action & Signaling.
- From small systems (3m cable) to large (3000m) systems.
- Outputs: BMS, BACnet, PLC, SCADA & Integration Features.
- Wireless Water Leak Detection System for existing facility.
- Detects Water Ingress & Initiates Signaling – Linear Wire.
- To be used in Areas with Sensitive Electrical Equipment.
- Server Rooms, Battery Rooms, Switchgear & Storage Areas.
- Contact us for more information.
-

- Vimpex Hydrosense Water Leak Detection System
- Linear Detection (Wire Type) & Point Detection (Probe Type)
- Types: Conventional System & Addressable System.
- Conventional System: 2, 4 & 8 Zone Panels.
- Addressable System: 2 Loop support for 25km Linear or 500 Probe Type.
- BMS Integration & Relay Outputs / Contacts for FACP Integration.
- Built-in Battery Backup & Fault Monitoring with Event Logs.
- Voice Sounder for Water Leak (Custom Message Support)
- Blue Beacon for Water Leak or Blue Remote LED Indicator.
- Site Specific Accessories & Design Elements for installation.
- For use in Water Sensitive Equipment & Thermal Storage Tank.
- Contact us for more information.
-

- Water Leak Detector – Sensor Probe or Cable Type.
- Used to detect leaks in chilled water lines or drainage.
- Probe type sensors are used to detect leaks in FCU unit.
- Fixed Tanks have passive leak detection systems within.
- Comprehensive detection of water leak in your facility.
- Our systems are capable for support up-to 3 KM sensing.
- Probe type sensors are available with volt free relay output.
- Wireless Water Leak Detection System as per site design.
- Water Leak Detection Systems are industry specific & reliable.
- Distance read type systems for pin-pointing location of leak.
- Water leak detection is ideal for use in data centers & servers.
- Early detection of water leak in critical facilities is recommended.
- Systems have outputs for BMS, BACnet, SMTP & relay outputs.
- Contact us today for a free consult.
-

- Wireless Control Systems – For Existing Facilities.
- Facility Monitoring Systems are ideal for cable free installation.
- Wireless Control systems for commercial & industrial use cases.
- Systems involve a transmitter with each unit and a receiver.
- Receiver shall have an antenna to interface every transmitter.
- Wireless transmitters have a battery life of over 10 years.
- Wireless temperature sensors & monitoring systems.
- Wireless temperature & humidity sensors & monitoring.
- Wireless Water Leak Detection System – Linear Cable Type.
- Wireless Water Leak Detection System – Probe / Point Type.
- Wireless Transmitter – Receives wired NO or NC digital input.
- Wireless Transmitter – Receives Analog 4-20mA Analog input.
- Wireless Gas Detection System – For Indoors & Outdoors.
- Wireless Systems can be of Wi-Fi type or Radio Frequency Type.
- Receiver Systems can integrate into BMS via Modbus or BACnet.
- Custom mapping features display status of wireless transmitters.
- Wireless Systems can be used to fine tune your facility management.
- Contact us for more information.